1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Allwinner A83t DWC HDMI TX Encoder
8
9description: |
10  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
11  IP with Allwinner\'s own PHY IP. It supports audio and video outputs
12  and CEC.
13
14  These DT bindings follow the Synopsys DWC HDMI TX bindings defined
15  in bridge/synopsys,dw-hdmi.yaml with the following device-specific
16  properties.
17
18maintainers:
19  - Chen-Yu Tsai <wens@csie.org>
20  - Maxime Ripard <mripard@kernel.org>
21
22properties:
23  "#phy-cells":
24    const: 0
25
26  compatible:
27    oneOf:
28      - const: allwinner,sun8i-a83t-dw-hdmi
29      - const: allwinner,sun50i-h6-dw-hdmi
30
31      - items:
32          - enum:
33              - allwinner,sun8i-h3-dw-hdmi
34              - allwinner,sun8i-r40-dw-hdmi
35              - allwinner,sun50i-a64-dw-hdmi
36          - const: allwinner,sun8i-a83t-dw-hdmi
37
38  reg:
39    maxItems: 1
40
41  reg-io-width:
42    const: 1
43
44  interrupts:
45    maxItems: 1
46
47  clocks:
48    minItems: 3
49    items:
50      - description: Bus Clock
51      - description: Register Clock
52      - description: TMDS Clock
53      - description: HDMI CEC Clock
54      - description: HDCP Clock
55      - description: HDCP Bus Clock
56
57  clock-names:
58    minItems: 3
59    items:
60      - const: iahb
61      - const: isfr
62      - const: tmds
63      - const: cec
64      - const: hdcp
65      - const: hdcp-bus
66
67  resets:
68    minItems: 1
69    items:
70      - description: HDMI Controller Reset
71      - description: HDCP Reset
72
73  reset-names:
74    minItems: 1
75    items:
76      - const: ctrl
77      - const: hdcp
78
79  phys:
80    maxItems: 1
81    description:
82      Phandle to the DWC HDMI PHY.
83
84  phy-names:
85    const: phy
86
87  hvcc-supply:
88    description:
89      The VCC power supply of the controller
90
91  ports:
92    $ref: /schemas/graph.yaml#/properties/ports
93
94    properties:
95      port@0:
96        $ref: /schemas/graph.yaml#/properties/port
97        description: |
98          Input endpoints of the controller. Usually the associated
99          TCON.
100
101      port@1:
102        $ref: /schemas/graph.yaml#/properties/port
103        description: |
104          Output endpoints of the controller. Usually an HDMI
105          connector.
106
107    required:
108      - port@0
109      - port@1
110
111required:
112  - compatible
113  - reg
114  - reg-io-width
115  - interrupts
116  - clocks
117  - clock-names
118  - resets
119  - reset-names
120  - phys
121  - phy-names
122  - ports
123
124if:
125  properties:
126    compatible:
127      contains:
128        enum:
129          - allwinner,sun50i-h6-dw-hdmi
130
131then:
132  properties:
133    clocks:
134      minItems: 6
135
136    clock-names:
137      minItems: 6
138
139    resets:
140      minItems: 2
141
142    reset-names:
143      minItems: 2
144
145
146additionalProperties: false
147
148examples:
149  - |
150    #include <dt-bindings/interrupt-controller/arm-gic.h>
151
152    /*
153     * This comes from the clock/sun8i-a83t-ccu.h and
154     * reset/sun8i-a83t-ccu.h headers, but we can't include them since
155     * it would trigger a bunch of warnings for redefinitions of
156     * symbols with the other example.
157     */
158    #define CLK_BUS_HDMI	39
159    #define CLK_HDMI		93
160    #define CLK_HDMI_SLOW	94
161    #define RST_BUS_HDMI1	26
162
163    hdmi@1ee0000 {
164        compatible = "allwinner,sun8i-a83t-dw-hdmi";
165        reg = <0x01ee0000 0x10000>;
166        reg-io-width = <1>;
167        interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
168        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
169                 <&ccu CLK_HDMI>;
170        clock-names = "iahb", "isfr", "tmds";
171        resets = <&ccu RST_BUS_HDMI1>;
172        reset-names = "ctrl";
173        phys = <&hdmi_phy>;
174        phy-names = "phy";
175        pinctrl-names = "default";
176        pinctrl-0 = <&hdmi_pins>;
177
178        ports {
179            #address-cells = <1>;
180            #size-cells = <0>;
181
182            port@0 {
183                reg = <0>;
184
185                endpoint {
186                    remote-endpoint = <&tcon1_out_hdmi>;
187                };
188            };
189
190            port@1 {
191                reg = <1>;
192            };
193        };
194    };
195
196    /* Cleanup after ourselves */
197    #undef CLK_BUS_HDMI
198    #undef CLK_HDMI
199    #undef CLK_HDMI_SLOW
200
201  - |
202    #include <dt-bindings/interrupt-controller/arm-gic.h>
203
204    /*
205     * This comes from the clock/sun50i-h6-ccu.h and
206     * reset/sun50i-h6-ccu.h headers, but we can't include them since
207     * it would trigger a bunch of warnings for redefinitions of
208     * symbols with the other example.
209     */
210    #define CLK_BUS_HDMI	126
211    #define CLK_BUS_HDCP	137
212    #define CLK_HDMI		123
213    #define CLK_HDMI_SLOW	124
214    #define CLK_HDMI_CEC	125
215    #define CLK_HDCP		136
216    #define RST_BUS_HDMI_SUB	57
217    #define RST_BUS_HDCP	62
218
219    hdmi@6000000 {
220        compatible = "allwinner,sun50i-h6-dw-hdmi";
221        reg = <0x06000000 0x10000>;
222        reg-io-width = <1>;
223        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
224        clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
225                 <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
226                 <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
227        clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
228                      "hdcp-bus";
229        resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
230        reset-names = "ctrl", "hdcp";
231        phys = <&hdmi_phy>;
232        phy-names = "phy";
233        pinctrl-names = "default";
234        pinctrl-0 = <&hdmi_pins>;
235
236        ports {
237            #address-cells = <1>;
238            #size-cells = <0>;
239
240            port@0 {
241                reg = <0>;
242
243                endpoint {
244                    remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
245                };
246            };
247
248            port@1 {
249                reg = <1>;
250            };
251        };
252    };
253
254...
255