1# SPDX-License-Identifier: GPL-2.0-only 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/display/bridge/ti,tfp410.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: TFP410 DPI to DVI encoder 8 9maintainers: 10 - Tomi Valkeinen <tomi.valkeinen@ti.com> 11 - Jyri Sarha <jsarha@ti.com> 12 13properties: 14 compatible: 15 const: ti,tfp410 16 17 reg: 18 description: I2C address of the device. 19 maxItems: 1 20 21 powerdown-gpios: 22 maxItems: 1 23 24 ti,deskew: 25 description: 26 Data de-skew value in 350ps increments, from 0 to 7, as configured 27 through the DK[3:1] pins. The de-skew multiplier is computed as 28 (DK[3:1] - 4), so it ranges from -4 to 3. 29 $ref: /schemas/types.yaml#/definitions/uint32 30 minimum: 0 31 maximum: 7 32 33 ports: 34 $ref: /schemas/graph.yaml#/properties/ports 35 36 properties: 37 port@0: 38 $ref: /schemas/graph.yaml#/$defs/port-base 39 unevaluatedProperties: false 40 description: DPI input port. 41 42 properties: 43 endpoint: 44 $ref: /schemas/graph.yaml#/$defs/endpoint-base 45 unevaluatedProperties: false 46 47 properties: 48 pclk-sample: 49 description: 50 Endpoint sampling edge. 51 enum: 52 - 0 # Falling edge 53 - 1 # Rising edge 54 default: 0 55 56 bus-width: 57 description: 58 Endpoint bus width. 59 enum: 60 - 12 # 12 data lines connected and dual-edge mode 61 - 24 # 24 data lines connected and single-edge mode 62 default: 24 63 64 port@1: 65 $ref: /schemas/graph.yaml#/properties/port 66 description: DVI output port. 67 68 required: 69 - port@0 70 - port@1 71 72required: 73 - compatible 74 - ports 75 76if: 77 required: 78 - reg 79then: 80 properties: 81 ti,deskew: false 82else: 83 required: 84 - ti,deskew 85 86additionalProperties: false 87 88examples: 89 - | 90 #include <dt-bindings/gpio/gpio.h> 91 92 tfp410: encoder { 93 compatible = "ti,tfp410"; 94 powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; 95 ti,deskew = <3>; 96 97 ports { 98 #address-cells = <1>; 99 #size-cells = <0>; 100 101 port@0 { 102 reg = <0>; 103 tfp410_in: endpoint { 104 pclk-sample = <1>; 105 bus-width = <24>; 106 remote-endpoint = <&dpi_out>; 107 }; 108 }; 109 110 port@1 { 111 reg = <1>; 112 tfp410_out: endpoint { 113 remote-endpoint = <&dvi_connector_in>; 114 }; 115 }; 116 }; 117 }; 118 119... 120