1* Milbeaut AHB DMA Controller
2
3Milbeaut AHB DMA controller has transfer capability below.
4 - device to memory transfer
5 - memory to device transfer
6
7Required property:
8- compatible:       Should be  "socionext,milbeaut-m10v-hdmac"
9- reg:              Should contain DMA registers location and length.
10- interrupts:       Should contain all of the per-channel DMA interrupts.
11                     Number of channels is configurable - 2, 4 or 8, so
12                     the number of interrupts specified should be {2,4,8}.
13- #dma-cells:       Should be 1. Specify the ID of the slave.
14- clocks:           Phandle to the clock used by the HDMAC module.
15
16
17Example:
18
19	hdmac1: dma-controller@1e110000 {
20		compatible = "socionext,milbeaut-m10v-hdmac";
21		reg = <0x1e110000 0x10000>;
22		interrupts = <0 132 4>,
23			     <0 133 4>,
24			     <0 134 4>,
25			     <0 135 4>,
26			     <0 136 4>,
27			     <0 137 4>,
28			     <0 138 4>,
29			     <0 139 4>;
30		#dma-cells = <1>;
31		clocks = <&dummy_clk>;
32	};
33