1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: I2C for Atmel/Microchip platforms
9
10maintainers:
11  - Alexandre Belloni <alexandre.belloni@bootlin.com>
12
13properties:
14  compatible:
15    oneOf:
16      - items:
17          - enum:
18              - atmel,at91rm9200-i2c
19              - atmel,at91sam9261-i2c
20              - atmel,at91sam9260-i2c
21              - atmel,at91sam9g20-i2c
22              - atmel,at91sam9g10-i2c
23              - atmel,at91sam9x5-i2c
24              - atmel,sama5d4-i2c
25              - atmel,sama5d2-i2c
26              - microchip,sam9x60-i2c
27      - items:
28          - const: microchip,sama7g5-i2c
29          - const: microchip,sam9x60-i2c
30
31  reg:
32    maxItems: 1
33
34  interrupts:
35    maxItems: 1
36
37  "#address-cells":
38    const: 1
39
40  "#size-cells":
41    const: 0
42
43  clocks:
44    maxItems: 1
45
46  clock-frequency:
47    default: 100000
48
49  dmas:
50    items:
51      - description: TX DMA Channel Specifier
52      - description: RX DMA Channel Specifier
53
54  dma-names:
55    items:
56      - const: tx
57      - const: rx
58
59  atmel,fifo-size:
60    $ref: /schemas/types.yaml#/definitions/uint32
61    description: |
62      Maximum number of data the RX and TX FIFOs can store for
63      FIFO capable I2C controllers.
64
65  scl-gpios: true
66
67  sda-gpios: true
68
69required:
70  - compatible
71  - reg
72  - interrupts
73  - "#address-cells"
74  - "#size-cells"
75  - clocks
76
77allOf:
78  - $ref: "i2c-controller.yaml"
79  - if:
80      properties:
81        compatible:
82          contains:
83            enum:
84              - atmel,sama5d4-i2c
85              - atmel,sama5d2-i2c
86              - microchip,sam9x60-i2c
87              - microchip,sama7g5-i2c
88    then:
89      properties:
90        i2c-sda-hold-time-ns:
91          description:
92            TWD hold time
93          maxItems: 1
94
95unevaluatedProperties: false
96
97examples:
98  - |
99    #include <dt-bindings/interrupt-controller/irq.h>
100    #include <dt-bindings/dma/at91.h>
101    #include <dt-bindings/gpio/gpio.h>
102
103    i2c0: i2c@fff84000 {
104        compatible = "atmel,at91sam9g20-i2c";
105        reg = <0xfff84000 0x100>;
106        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
107        #address-cells = <1>;
108        #size-cells = <0>;
109        clocks = <&twi0_clk>;
110        clock-frequency = <400000>;
111
112        eeprom@50 {
113            compatible = "atmel,24c512";
114            reg = <0x50>;
115            pagesize = <128>;
116        };
117    };
118
119    i2c1: i2c@f8034600 {
120        compatible = "atmel,sama5d2-i2c";
121        reg = <0xf8034600 0x100>;
122        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
123        dmas = <&dma0
124            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
125            AT91_XDMAC_DT_PERID(11)>,
126               <&dma0
127            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
128            AT91_XDMAC_DT_PERID(12)>;
129        dma-names = "tx", "rx";
130        #address-cells = <1>;
131        #size-cells = <0>;
132        clocks = <&flx0>;
133        atmel,fifo-size = <16>;
134        i2c-sda-hold-time-ns = <336>;
135        pinctrl-names = "default", "gpio";
136        pinctrl-0 = <&pinctrl_i2c0>;
137        pinctrl-1 = <&pinctrl_i2c0_gpio>;
138        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
139        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
140
141        eeprom@54 {
142            compatible = "atmel,24c02";
143            reg = <0x54>;
144            pagesize = <16>;
145        };
146    };
147