1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: MediaTek DWMAC glue layer controller
8
9maintainers:
10  - Biao Huang <biao.huang@mediatek.com>
11
12description:
13  This file documents platform glue layer for stmmac.
14
15# We need a select here so we don't match all nodes with 'snps,dwmac'
16select:
17  properties:
18    compatible:
19      contains:
20        enum:
21          - mediatek,mt2712-gmac
22          - mediatek,mt8188-gmac
23          - mediatek,mt8195-gmac
24  required:
25    - compatible
26
27allOf:
28  - $ref: "snps,dwmac.yaml#"
29
30properties:
31  compatible:
32    oneOf:
33      - items:
34          - enum:
35              - mediatek,mt2712-gmac
36          - const: snps,dwmac-4.20a
37      - items:
38          - enum:
39              - mediatek,mt8195-gmac
40          - const: snps,dwmac-5.10a
41      - items:
42          - enum:
43              - mediatek,mt8188-gmac
44          - const: mediatek,mt8195-gmac
45          - const: snps,dwmac-5.10a
46
47  clocks:
48    minItems: 5
49    items:
50      - description: AXI clock
51      - description: APB clock
52      - description: MAC Main clock
53      - description: PTP clock
54      - description: RMII reference clock provided by MAC
55      - description: MAC clock gate
56
57  clock-names:
58    minItems: 5
59    items:
60      - const: axi
61      - const: apb
62      - const: mac_main
63      - const: ptp_ref
64      - const: rmii_internal
65      - const: mac_cg
66
67  power-domains:
68    maxItems: 1
69
70  mediatek,pericfg:
71    $ref: /schemas/types.yaml#/definitions/phandle
72    description:
73      The phandle to the syscon node that control ethernet
74      interface and timing delay.
75
76  mediatek,tx-delay-ps:
77    description:
78      The internal TX clock delay (provided by this driver) in nanoseconds.
79      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
80      or will round down. Range 0~31*170.
81      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
82      or will round down. Range 0~31*550.
83      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290,
84      or will round down. Range 0~31*290.
85
86  mediatek,rx-delay-ps:
87    description:
88      The internal RX clock delay (provided by this driver) in nanoseconds.
89      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
90      or will round down. Range 0~31*170.
91      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
92      or will round down. Range 0~31*550.
93      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple
94      of 290, or will round down. Range 0~31*290.
95
96  mediatek,rmii-rxc:
97    type: boolean
98    description:
99      If present, indicates that the RMII reference clock, which is from external
100      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
101
102  mediatek,rmii-clk-from-mac:
103    type: boolean
104    description:
105      If present, indicates that MAC provides the RMII reference clock, which
106      outputs to TXC pin only.
107
108  mediatek,txc-inverse:
109    type: boolean
110    description:
111      If present, indicates that
112      1. tx clock will be inversed in MII/RGMII case,
113      2. tx clock inside MAC will be inversed relative to reference clock
114         which is from external PHYs in RMII case, and it rarely happen.
115      3. the reference clock, which outputs to TXC pin will be inversed in RMII case
116         when the reference clock is from MAC.
117
118  mediatek,rxc-inverse:
119    type: boolean
120    description:
121      If present, indicates that
122      1. rx clock will be inversed in MII/RGMII case.
123      2. reference clock will be inversed when arrived at MAC in RMII case, when
124         the reference clock is from external PHYs.
125      3. the inside clock, which be sent to MAC, will be inversed in RMII case when
126         the reference clock is from MAC.
127
128  mediatek,mac-wol:
129    type: boolean
130    description:
131      If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled.
132      Otherwise, PHY WOL is perferred.
133
134required:
135  - compatible
136  - reg
137  - interrupts
138  - interrupt-names
139  - clocks
140  - clock-names
141  - phy-mode
142  - mediatek,pericfg
143
144unevaluatedProperties: false
145
146examples:
147  - |
148    #include <dt-bindings/clock/mt2712-clk.h>
149    #include <dt-bindings/gpio/gpio.h>
150    #include <dt-bindings/interrupt-controller/arm-gic.h>
151    #include <dt-bindings/interrupt-controller/irq.h>
152    #include <dt-bindings/power/mt2712-power.h>
153
154    eth: ethernet@1101c000 {
155        compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
156        reg = <0x1101c000 0x1300>;
157        interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
158        interrupt-names = "macirq";
159        phy-mode ="rgmii-rxid";
160        mac-address = [00 55 7b b5 7d f7];
161        clock-names = "axi",
162                      "apb",
163                      "mac_main",
164                      "ptp_ref",
165                      "rmii_internal";
166        clocks = <&pericfg CLK_PERI_GMAC>,
167                 <&pericfg CLK_PERI_GMAC_PCLK>,
168                 <&topckgen CLK_TOP_ETHER_125M_SEL>,
169                 <&topckgen CLK_TOP_ETHER_50M_SEL>,
170                 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
171        assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
172                          <&topckgen CLK_TOP_ETHER_50M_SEL>,
173                          <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
174        assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
175                                 <&topckgen CLK_TOP_APLL1_D3>,
176                                 <&topckgen CLK_TOP_ETHERPLL_50M>;
177        power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
178        mediatek,pericfg = <&pericfg>;
179        mediatek,tx-delay-ps = <1530>;
180        snps,txpbl = <1>;
181        snps,rxpbl = <1>;
182        snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
183        snps,reset-delays-us = <0 10000 10000>;
184    };
185