1Freescale FlexTimer Module (FTM) PWM controller
2
3The same FTM PWM device can have a different endianness on different SoCs. The
4device tree provides a property to describing this so that an operating system
5device driver can handle all variants of the device. Refer to the table below
6for the endianness of the FTM PWM block as integrated into the existing SoCs:
7
8	SoC     | FTM-PWM endianness
9	--------+-------------------
10	Vybrid  | LE
11	LS1     | BE
12	LS2     | LE
13
14Please see ../regmap/regmap.txt for more detail about how to specify endian
15modes in device tree.
16
17
18Required properties:
19- compatible : should be "fsl,<soc>-ftm-pwm" and one of the following
20   compatible strings:
21  - "fsl,vf610-ftm-pwm" for PWM compatible with the one integrated on VF610
22  - "fsl,imx8qm-ftm-pwm" for PWM compatible with the one integrated on i.MX8QM
23- reg: Physical base address and length of the controller's registers
24- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of
25  the cells format.
26- clock-names: Should include the following module clock source entries:
27    "ftm_sys" (module clock, also can be used as counter clock),
28    "ftm_ext" (external counter clock),
29    "ftm_fix" (fixed counter clock),
30    "ftm_cnt_clk_en" (external and fixed counter clock enable/disable).
31- clocks: Must contain a phandle and clock specifier for each entry in
32  clock-names, please see clock/clock-bindings.txt for details of the property
33  values.
34- pinctrl-names: Must contain a "default" entry.
35- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
36  See pinctrl/pinctrl-bindings.txt for details of the property values.
37- big-endian: Boolean property, required if the FTM PWM registers use a big-
38  endian rather than little-endian layout.
39
40Example:
41
42pwm0: pwm@40038000 {
43		compatible = "fsl,vf610-ftm-pwm";
44		reg = <0x40038000 0x1000>;
45		#pwm-cells = <3>;
46		clock-names = "ftm_sys", "ftm_ext",
47				"ftm_fix", "ftm_cnt_clk_en";
48		clocks = <&clks VF610_CLK_FTM0>,
49			<&clks VF610_CLK_FTM0_EXT_SEL>,
50			<&clks VF610_CLK_FTM0_FIX_SEL>,
51			<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
52		pinctrl-names = "default";
53		pinctrl-0 = <&pinctrl_pwm0_1>;
54		big-endian;
55};
56