1* Powerventure Semiconductor PV88090 Voltage Regulator
2
3Required properties:
4- compatible: "pvs,pv88090".
5- reg: I2C slave address, usually 0x48.
6- interrupts: the interrupt outputs of the controller
7- regulators: A node that houses a sub-node for each regulator within the
8  device. Each sub-node is identified using the node's name, with valid
9  values listed below. The content of each sub-node is defined by the
10  standard binding for regulators; see regulator.txt.
11  BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
12
13Optional properties:
14- Any optional property defined in regulator.txt
15
16Example
17
18	pmic: pv88090@48 {
19		compatible = "pvs,pv88090";
20		reg = <0x48>;
21		interrupt-parent = <&gpio>;
22		interrupts = <24 24>;
23
24		regulators {
25			BUCK1 {
26				regulator-name = "buck1";
27				regulator-min-microvolt = < 600000>;
28				regulator-max-microvolt = <1393750>;
29				regulator-min-microamp 	= < 220000>;
30				regulator-max-microamp 	= <7040000>;
31				regulator-boot-on;
32			};
33
34			BUCK2 {
35				regulator-name = "buck2";
36				regulator-min-microvolt = < 600000>;
37				regulator-max-microvolt = <1393750>;
38				regulator-min-microamp 	= <1496000>;
39				regulator-max-microamp 	= <4189000>;
40			};
41
42			BUCK3 {
43				regulator-name = "buck3";
44				regulator-min-microvolt = <600000>;
45				regulator-max-microvolt = <1393750>;
46				regulator-min-microamp 	= <1496000>;
47				regulator-max-microamp 	= <4189000>;
48				regulator-boot-on;
49			};
50
51			LDO1 {
52				regulator-name = "ldo1";
53				regulator-min-microvolt = <1200000>;
54				regulator-max-microvolt = <4350000>;
55				regulator-boot-on;
56			};
57
58			LDO2 {
59				regulator-name = "ldo2";
60				regulator-min-microvolt = < 650000>;
61				regulator-max-microvolt = <2225000>;
62				regulator-boot-on;
63			};
64		};
65	};
66