1.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
2
3******************
4Compressed Formats
5******************
6
7
8.. _compressed-formats:
9
10.. raw:: latex
11
12    \small
13
14.. tabularcolumns:: |p{5.8cm}|p{1.2cm}|p{10.3cm}|
15
16.. cssclass:: longtable
17
18.. flat-table:: Compressed Image Formats
19    :header-rows:  1
20    :stub-columns: 0
21    :widths:       3 1 4
22
23    * - Identifier
24      - Code
25      - Details
26    * .. _V4L2-PIX-FMT-JPEG:
27
28      - ``V4L2_PIX_FMT_JPEG``
29      - 'JPEG'
30      - TBD. See also :ref:`VIDIOC_G_JPEGCOMP <VIDIOC_G_JPEGCOMP>`,
31	:ref:`VIDIOC_S_JPEGCOMP <VIDIOC_G_JPEGCOMP>`.
32    * .. _V4L2-PIX-FMT-MPEG:
33
34      - ``V4L2_PIX_FMT_MPEG``
35      - 'MPEG'
36      - MPEG multiplexed stream. The actual format is determined by
37	extended control ``V4L2_CID_MPEG_STREAM_TYPE``, see
38	:ref:`mpeg-control-id`.
39    * .. _V4L2-PIX-FMT-H264:
40
41      - ``V4L2_PIX_FMT_H264``
42      - 'H264'
43      - H264 Access Unit.
44	The decoder expects one Access Unit per buffer.
45	The encoder generates one Access Unit per buffer.
46	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
47	then the decoder has no requirements since it can parse all the
48	information from the raw bytestream.
49    * .. _V4L2-PIX-FMT-H264-NO-SC:
50
51      - ``V4L2_PIX_FMT_H264_NO_SC``
52      - 'AVC1'
53      - H264 video elementary stream without start codes.
54    * .. _V4L2-PIX-FMT-H264-MVC:
55
56      - ``V4L2_PIX_FMT_H264_MVC``
57      - 'M264'
58      - H264 MVC video elementary stream.
59    * .. _V4L2-PIX-FMT-H264-SLICE:
60
61      - ``V4L2_PIX_FMT_H264_SLICE``
62      - 'S264'
63      - H264 parsed slice data, including slice headers, either with or
64	without the start code, as extracted from the H264 bitstream.
65	This format is adapted for stateless video decoders that implement an
66	H264 pipeline with the :ref:`stateless_decoder`.
67	This pixelformat has two modifiers that must be set at least once
68	through the ``V4L2_CID_STATELESS_H264_DECODE_MODE``
69        and ``V4L2_CID_STATELESS_H264_START_CODE`` controls.
70	In addition, metadata associated with the frame to decode are
71	required to be passed through the ``V4L2_CID_STATELESS_H264_SPS``,
72	``V4L2_CID_STATELESS_H264_PPS``,
73	``V4L2_CID_STATELESS_H264_SCALING_MATRIX``,
74	``V4L2_CID_STATELESS_H264_SLICE_PARAMS`` and
75	``V4L2_CID_STATELESS_H264_DECODE_PARAMS`` controls.  See the
76	:ref:`associated Codec Control IDs <v4l2-codec-stateless-h264>`.
77        Exactly one output and one capture buffer must be provided for use
78	with this pixel format. The output buffer must contain the
79	appropriate number of macroblocks to decode a full
80	corresponding frame to the matching capture buffer.
81
82	The syntax for this format is documented in :ref:`h264`, section
83	7.3.2.8 "Slice layer without partitioning RBSP syntax" and the following
84	sections.
85
86    * .. _V4L2-PIX-FMT-H263:
87
88      - ``V4L2_PIX_FMT_H263``
89      - 'H263'
90      - H263 video elementary stream.
91    * .. _V4L2-PIX-FMT-MPEG1:
92
93      - ``V4L2_PIX_FMT_MPEG1``
94      - 'MPG1'
95      - MPEG1 Picture. Each buffer starts with a Picture header, followed
96	by other headers as needed and ending with the Picture data.
97	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
98	then the decoder has no requirements since it can parse all the
99	information from the raw bytestream.
100    * .. _V4L2-PIX-FMT-MPEG2:
101
102      - ``V4L2_PIX_FMT_MPEG2``
103      - 'MPG2'
104      - MPEG2 Picture. Each buffer starts with a Picture header, followed
105	by other headers as needed and ending with the Picture data.
106	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
107	then the decoder has no requirements since it can parse all the
108	information from the raw bytestream.
109    * .. _V4L2-PIX-FMT-MPEG2-SLICE:
110
111      - ``V4L2_PIX_FMT_MPEG2_SLICE``
112      - 'MG2S'
113      - MPEG-2 parsed slice data, as extracted from the MPEG-2 bitstream.
114	This format is adapted for stateless video decoders that implement a
115	MPEG-2 pipeline with the :ref:`stateless_decoder`.
116	Metadata associated with the frame to decode is required to be passed
117	through the ``V4L2_CID_STATELESS_MPEG2_SEQUENCE`` and
118        ``V4L2_CID_STATELESS_MPEG2_PICTURE`` controls.
119        Quantisation matrices can optionally be specified through the
120	``V4L2_CID_STATELESS_MPEG2_QUANTISATION`` control.
121	See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-mpeg2>`.
122	Exactly one output and one capture buffer must be provided for use with
123	this pixel format. The output buffer must contain the appropriate number
124	of macroblocks to decode a full corresponding frame to the matching
125	capture buffer.
126    * .. _V4L2-PIX-FMT-MPEG4:
127
128      - ``V4L2_PIX_FMT_MPEG4``
129      - 'MPG4'
130      - MPEG4 video elementary stream.
131    * .. _V4L2-PIX-FMT-XVID:
132
133      - ``V4L2_PIX_FMT_XVID``
134      - 'XVID'
135      - Xvid video elementary stream.
136    * .. _V4L2-PIX-FMT-VC1-ANNEX-G:
137
138      - ``V4L2_PIX_FMT_VC1_ANNEX_G``
139      - 'VC1G'
140      - VC1, SMPTE 421M Annex G compliant stream.
141    * .. _V4L2-PIX-FMT-VC1-ANNEX-L:
142
143      - ``V4L2_PIX_FMT_VC1_ANNEX_L``
144      - 'VC1L'
145      - VC1, SMPTE 421M Annex L compliant stream.
146    * .. _V4L2-PIX-FMT-VP8:
147
148      - ``V4L2_PIX_FMT_VP8``
149      - 'VP80'
150      - VP8 compressed video frame. The encoder generates one
151	compressed frame per buffer, and the decoder requires one
152	compressed frame per buffer.
153    * .. _V4L2-PIX-FMT-VP8-FRAME:
154
155      - ``V4L2_PIX_FMT_VP8_FRAME``
156      - 'VP8F'
157      - VP8 parsed frame, including the frame header, as extracted from the container.
158	This format is adapted for stateless video decoders that implement an
159	VP8 pipeline with the :ref:`stateless_decoder`.
160	Metadata associated with the frame to decode is required to be passed
161	through the ``V4L2_CID_STATELESS_VP8_FRAME`` control.
162	See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-vp8>`.
163	Exactly one output and one capture buffer must be provided for use with
164	this pixel format. The output buffer must contain the appropriate number
165	of macroblocks to decode a full corresponding frame to the matching
166	capture buffer.
167
168    * .. _V4L2-PIX-FMT-VP9:
169
170      - ``V4L2_PIX_FMT_VP9``
171      - 'VP90'
172      - VP9 compressed video frame. The encoder generates one
173	compressed frame per buffer, and the decoder requires one
174	compressed frame per buffer.
175    * .. _V4L2-PIX-FMT-VP9-FRAME:
176
177      - ``V4L2_PIX_FMT_VP9_FRAME``
178      - 'VP9F'
179      - VP9 parsed frame, including the frame header, as extracted from the container.
180	This format is adapted for stateless video decoders that implement a
181	VP9 pipeline with the :ref:`stateless_decoder`.
182	Metadata associated with the frame to decode is required to be passed
183	through the ``V4L2_CID_STATELESS_VP9_FRAME`` and
184	the ``V4L2_CID_STATELESS_VP9_COMPRESSED_HDR`` controls.
185	See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-vp9>`.
186	Exactly one output and one capture buffer must be provided for use with
187	this pixel format. The output buffer must contain the appropriate number
188	of macroblocks to decode a full corresponding frame to the matching
189	capture buffer.
190    * .. _V4L2-PIX-FMT-HEVC:
191
192      - ``V4L2_PIX_FMT_HEVC``
193      - 'HEVC'
194      - HEVC/H.265 Access Unit.
195	The decoder expects one Access Unit per buffer.
196	The encoder generates one Access Unit per buffer.
197	If :ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
198	then the decoder has no	requirements since it can parse all the
199	information from the raw bytestream.
200    * .. _V4L2-PIX-FMT-HEVC-SLICE:
201
202      - ``V4L2_PIX_FMT_HEVC_SLICE``
203      - 'S265'
204      - HEVC parsed slice data, as extracted from the HEVC bitstream.
205	This format is adapted for stateless video decoders that implement a
206	HEVC pipeline (using the :ref:`mem2mem` and :ref:`media-request-api`).
207	This pixelformat has two modifiers that must be set at least once
208	through the ``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE``
209        and ``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE`` controls.
210	Metadata associated with the frame to decode is required to be passed
211	through the following controls:
212        ``V4L2_CID_MPEG_VIDEO_HEVC_SPS``,
213        ``V4L2_CID_MPEG_VIDEO_HEVC_PPS``, and
214        ``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS``.
215	See the :ref:`associated Codec Control IDs <v4l2-codec-stateless-hevc>`.
216	Buffers associated with this pixel format must contain the appropriate
217	number of macroblocks to decode a full corresponding frame.
218    * .. _V4L2-PIX-FMT-FWHT:
219
220      - ``V4L2_PIX_FMT_FWHT``
221      - 'FWHT'
222      - Video elementary stream using a codec based on the Fast Walsh Hadamard
223        Transform. This codec is implemented by the vicodec ('Virtual Codec')
224	driver. See the codec-fwht.h header for more details.
225	:ref:`VIDIOC_ENUM_FMT` reports ``V4L2_FMT_FLAG_CONTINUOUS_BYTESTREAM``
226	since the decoder can parse all the information from the raw bytestream.
227    * .. _V4L2-PIX-FMT-FWHT-STATELESS:
228
229      - ``V4L2_PIX_FMT_FWHT_STATELESS``
230      - 'SFWH'
231      - Same format as V4L2_PIX_FMT_FWHT but requires stateless codec implementation.
232        Metadata associated with the frame to decode is required to be passed
233        through the ``V4L2_CID_STATELESS_FWHT_PARAMS`` control.
234	See the :ref:`associated Codec Control ID <codec-stateless-fwht>`.
235
236.. raw:: latex
237
238    \normalsize
239