1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * linux/arch/alpha/kernel/core_lca.c
4 *
5 * Written by David Mosberger (davidm@cs.arizona.edu) with some code
6 * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
7 * bios code.
8 *
9 * Code common to all LCA core logic chips.
10 */
11
12 #define __EXTERN_INLINE inline
13 #include <asm/io.h>
14 #include <asm/core_lca.h>
15 #undef __EXTERN_INLINE
16
17 #include <linux/types.h>
18 #include <linux/pci.h>
19 #include <linux/init.h>
20 #include <linux/tty.h>
21
22 #include <asm/ptrace.h>
23 #include <asm/irq_regs.h>
24 #include <asm/smp.h>
25
26 #include "proto.h"
27 #include "pci_impl.h"
28
29
30 /*
31 * BIOS32-style PCI interface:
32 */
33
34 /*
35 * Machine check reasons. Defined according to PALcode sources
36 * (osf.h and platform.h).
37 */
38 #define MCHK_K_TPERR 0x0080
39 #define MCHK_K_TCPERR 0x0082
40 #define MCHK_K_HERR 0x0084
41 #define MCHK_K_ECC_C 0x0086
42 #define MCHK_K_ECC_NC 0x0088
43 #define MCHK_K_UNKNOWN 0x008A
44 #define MCHK_K_CACKSOFT 0x008C
45 #define MCHK_K_BUGCHECK 0x008E
46 #define MCHK_K_OS_BUGCHECK 0x0090
47 #define MCHK_K_DCPERR 0x0092
48 #define MCHK_K_ICPERR 0x0094
49
50
51 /*
52 * Platform-specific machine-check reasons:
53 */
54 #define MCHK_K_SIO_SERR 0x204 /* all platforms so far */
55 #define MCHK_K_SIO_IOCHK 0x206 /* all platforms so far */
56 #define MCHK_K_DCSR 0x208 /* all but Noname */
57
58
59 /*
60 * Given a bus, device, and function number, compute resulting
61 * configuration space address and setup the LCA_IOC_CONF register
62 * accordingly. It is therefore not safe to have concurrent
63 * invocations to configuration space access routines, but there
64 * really shouldn't be any need for this.
65 *
66 * Type 0:
67 *
68 * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
69 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
70 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
71 * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
72 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
73 *
74 * 31:11 Device select bit.
75 * 10:8 Function number
76 * 7:2 Register number
77 *
78 * Type 1:
79 *
80 * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
81 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
82 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
83 * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
84 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
85 *
86 * 31:24 reserved
87 * 23:16 bus number (8 bits = 128 possible buses)
88 * 15:11 Device number (5 bits)
89 * 10:8 function number
90 * 7:2 register number
91 *
92 * Notes:
93 * The function number selects which function of a multi-function device
94 * (e.g., SCSI and Ethernet).
95 *
96 * The register selects a DWORD (32 bit) register offset. Hence it
97 * doesn't get shifted by 2 bits as we want to "drop" the bottom two
98 * bits.
99 */
100
101 static int
mk_conf_addr(struct pci_bus * pbus,unsigned int device_fn,int where,unsigned long * pci_addr)102 mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
103 unsigned long *pci_addr)
104 {
105 unsigned long addr;
106 u8 bus = pbus->number;
107
108 if (bus == 0) {
109 int device = device_fn >> 3;
110 int func = device_fn & 0x7;
111
112 /* Type 0 configuration cycle. */
113
114 if (device > 12) {
115 return -1;
116 }
117
118 *(vulp)LCA_IOC_CONF = 0;
119 addr = (1 << (11 + device)) | (func << 8) | where;
120 } else {
121 /* Type 1 configuration cycle. */
122 *(vulp)LCA_IOC_CONF = 1;
123 addr = (bus << 16) | (device_fn << 8) | where;
124 }
125 *pci_addr = addr;
126 return 0;
127 }
128
129 static unsigned int
conf_read(unsigned long addr)130 conf_read(unsigned long addr)
131 {
132 unsigned long flags, code, stat0;
133 unsigned int value;
134
135 local_irq_save(flags);
136
137 /* Reset status register to avoid losing errors. */
138 stat0 = *(vulp)LCA_IOC_STAT0;
139 *(vulp)LCA_IOC_STAT0 = stat0;
140 mb();
141
142 /* Access configuration space. */
143 value = *(vuip)addr;
144 draina();
145
146 stat0 = *(vulp)LCA_IOC_STAT0;
147 if (stat0 & LCA_IOC_STAT0_ERR) {
148 code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
149 & LCA_IOC_STAT0_CODE_MASK);
150 if (code != 1) {
151 printk("lca.c:conf_read: got stat0=%lx\n", stat0);
152 }
153
154 /* Reset error status. */
155 *(vulp)LCA_IOC_STAT0 = stat0;
156 mb();
157
158 /* Reset machine check. */
159 wrmces(0x7);
160
161 value = 0xffffffff;
162 }
163 local_irq_restore(flags);
164 return value;
165 }
166
167 static void
conf_write(unsigned long addr,unsigned int value)168 conf_write(unsigned long addr, unsigned int value)
169 {
170 unsigned long flags, code, stat0;
171
172 local_irq_save(flags); /* avoid getting hit by machine check */
173
174 /* Reset status register to avoid losing errors. */
175 stat0 = *(vulp)LCA_IOC_STAT0;
176 *(vulp)LCA_IOC_STAT0 = stat0;
177 mb();
178
179 /* Access configuration space. */
180 *(vuip)addr = value;
181 draina();
182
183 stat0 = *(vulp)LCA_IOC_STAT0;
184 if (stat0 & LCA_IOC_STAT0_ERR) {
185 code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
186 & LCA_IOC_STAT0_CODE_MASK);
187 if (code != 1) {
188 printk("lca.c:conf_write: got stat0=%lx\n", stat0);
189 }
190
191 /* Reset error status. */
192 *(vulp)LCA_IOC_STAT0 = stat0;
193 mb();
194
195 /* Reset machine check. */
196 wrmces(0x7);
197 }
198 local_irq_restore(flags);
199 }
200
201 static int
lca_read_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * value)202 lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
203 int size, u32 *value)
204 {
205 unsigned long addr, pci_addr;
206 long mask;
207 int shift;
208
209 if (mk_conf_addr(bus, devfn, where, &pci_addr))
210 return PCIBIOS_DEVICE_NOT_FOUND;
211
212 shift = (where & 3) * 8;
213 mask = (size - 1) * 8;
214 addr = (pci_addr << 5) + mask + LCA_CONF;
215 *value = conf_read(addr) >> (shift);
216 return PCIBIOS_SUCCESSFUL;
217 }
218
219 static int
lca_write_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 value)220 lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
221 u32 value)
222 {
223 unsigned long addr, pci_addr;
224 long mask;
225
226 if (mk_conf_addr(bus, devfn, where, &pci_addr))
227 return PCIBIOS_DEVICE_NOT_FOUND;
228
229 mask = (size - 1) * 8;
230 addr = (pci_addr << 5) + mask + LCA_CONF;
231 conf_write(addr, value << ((where & 3) * 8));
232 return PCIBIOS_SUCCESSFUL;
233 }
234
235 struct pci_ops lca_pci_ops =
236 {
237 .read = lca_read_config,
238 .write = lca_write_config,
239 };
240
241 void
lca_pci_tbi(struct pci_controller * hose,dma_addr_t start,dma_addr_t end)242 lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
243 {
244 wmb();
245 *(vulp)LCA_IOC_TBIA = 0;
246 mb();
247 }
248
249 void __init
lca_init_arch(void)250 lca_init_arch(void)
251 {
252 struct pci_controller *hose;
253
254 /*
255 * Create our single hose.
256 */
257
258 pci_isa_hose = hose = alloc_pci_controller();
259 hose->io_space = &ioport_resource;
260 hose->mem_space = &iomem_resource;
261 hose->index = 0;
262
263 hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
264 hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
265 hose->sparse_io_base = LCA_IO - IDENT_ADDR;
266 hose->dense_io_base = 0;
267
268 /*
269 * Set up the PCI to main memory translation windows.
270 *
271 * Mimic the SRM settings for the direct-map window.
272 * Window 0 is scatter-gather 8MB at 8MB (for isa).
273 * Window 1 is direct access 1GB at 1GB.
274 *
275 * Note that we do not try to save any of the DMA window CSRs
276 * before setting them, since we cannot read those CSRs on LCA.
277 */
278 hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
279 SMP_CACHE_BYTES);
280 hose->sg_pci = NULL;
281 __direct_map_base = 0x40000000;
282 __direct_map_size = 0x40000000;
283
284 *(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
285 *(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
286 *(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
287
288 *(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
289 *(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
290 *(vulp)LCA_IOC_T_BASE1 = 0;
291
292 *(vulp)LCA_IOC_TB_ENA = 0x80;
293
294 lca_pci_tbi(hose, 0, -1);
295
296 /*
297 * Disable PCI parity for now. The NCR53c810 chip has
298 * troubles meeting the PCI spec which results in
299 * data parity errors.
300 */
301 *(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
302
303 /*
304 * Finally, set up for restoring the correct HAE if using SRM.
305 * Again, since we cannot read many of the CSRs on the LCA,
306 * one of which happens to be the HAE, we save the value that
307 * the SRM will expect...
308 */
309 if (alpha_using_srm)
310 srm_hae = 0x80000000UL;
311 }
312
313 /*
314 * Constants used during machine-check handling. I suppose these
315 * could be moved into lca.h but I don't see much reason why anybody
316 * else would want to use them.
317 */
318
319 #define ESR_EAV (1UL<< 0) /* error address valid */
320 #define ESR_CEE (1UL<< 1) /* correctable error */
321 #define ESR_UEE (1UL<< 2) /* uncorrectable error */
322 #define ESR_WRE (1UL<< 3) /* write-error */
323 #define ESR_SOR (1UL<< 4) /* error source */
324 #define ESR_CTE (1UL<< 7) /* cache-tag error */
325 #define ESR_MSE (1UL<< 9) /* multiple soft errors */
326 #define ESR_MHE (1UL<<10) /* multiple hard errors */
327 #define ESR_NXM (1UL<<12) /* non-existent memory */
328
329 #define IOC_ERR ( 1<<4) /* ioc logs an error */
330 #define IOC_CMD_SHIFT 0
331 #define IOC_CMD (0xf<<IOC_CMD_SHIFT)
332 #define IOC_CODE_SHIFT 8
333 #define IOC_CODE (0xf<<IOC_CODE_SHIFT)
334 #define IOC_LOST ( 1<<5)
335 #define IOC_P_NBR ((__u32) ~((1<<13) - 1))
336
337 static void
mem_error(unsigned long esr,unsigned long ear)338 mem_error(unsigned long esr, unsigned long ear)
339 {
340 printk(" %s %s error to %s occurred at address %x\n",
341 ((esr & ESR_CEE) ? "Correctable" :
342 (esr & ESR_UEE) ? "Uncorrectable" : "A"),
343 (esr & ESR_WRE) ? "write" : "read",
344 (esr & ESR_SOR) ? "memory" : "b-cache",
345 (unsigned) (ear & 0x1ffffff8));
346 if (esr & ESR_CTE) {
347 printk(" A b-cache tag parity error was detected.\n");
348 }
349 if (esr & ESR_MSE) {
350 printk(" Several other correctable errors occurred.\n");
351 }
352 if (esr & ESR_MHE) {
353 printk(" Several other uncorrectable errors occurred.\n");
354 }
355 if (esr & ESR_NXM) {
356 printk(" Attempted to access non-existent memory.\n");
357 }
358 }
359
360 static void
ioc_error(__u32 stat0,__u32 stat1)361 ioc_error(__u32 stat0, __u32 stat1)
362 {
363 static const char * const pci_cmd[] = {
364 "Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
365 "Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
366 "Rsvd4", "Configuration Read", "Configuration Write",
367 "Memory Read Multiple", "Dual Address", "Memory Read Line",
368 "Memory Write and Invalidate"
369 };
370 static const char * const err_name[] = {
371 "exceeded retry limit", "no device", "bad data parity",
372 "target abort", "bad address parity", "page table read error",
373 "invalid page", "data error"
374 };
375 unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
376 unsigned cmd = (stat0 & IOC_CMD) >> IOC_CMD_SHIFT;
377
378 printk(" %s initiated PCI %s cycle to address %x"
379 " failed due to %s.\n",
380 code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
381
382 if (code == 5 || code == 6) {
383 printk(" (Error occurred at PCI memory address %x.)\n",
384 (stat0 & ~IOC_P_NBR));
385 }
386 if (stat0 & IOC_LOST) {
387 printk(" Other PCI errors occurred simultaneously.\n");
388 }
389 }
390
391 void
lca_machine_check(unsigned long vector,unsigned long la_ptr)392 lca_machine_check(unsigned long vector, unsigned long la_ptr)
393 {
394 const char * reason;
395 union el_lca el;
396
397 el.c = (struct el_common *) la_ptr;
398
399 wrmces(rdmces()); /* reset machine check pending flag */
400
401 printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
402 vector, get_irq_regs()->pc, (unsigned int) el.c->code);
403
404 /*
405 * The first quadword after the common header always seems to
406 * be the machine check reason---don't know why this isn't
407 * part of the common header instead. In the case of a long
408 * logout frame, the upper 32 bits is the machine check
409 * revision level, which we ignore for now.
410 */
411 switch ((unsigned int) el.c->code) {
412 case MCHK_K_TPERR: reason = "tag parity error"; break;
413 case MCHK_K_TCPERR: reason = "tag control parity error"; break;
414 case MCHK_K_HERR: reason = "access to non-existent memory"; break;
415 case MCHK_K_ECC_C: reason = "correctable ECC error"; break;
416 case MCHK_K_ECC_NC: reason = "non-correctable ECC error"; break;
417 case MCHK_K_CACKSOFT: reason = "MCHK_K_CACKSOFT"; break;
418 case MCHK_K_BUGCHECK: reason = "illegal exception in PAL mode"; break;
419 case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
420 case MCHK_K_DCPERR: reason = "d-cache parity error"; break;
421 case MCHK_K_ICPERR: reason = "i-cache parity error"; break;
422 case MCHK_K_SIO_SERR: reason = "SIO SERR occurred on PCI bus"; break;
423 case MCHK_K_SIO_IOCHK: reason = "SIO IOCHK occurred on ISA bus"; break;
424 case MCHK_K_DCSR: reason = "MCHK_K_DCSR"; break;
425 case MCHK_K_UNKNOWN:
426 default: reason = "unknown"; break;
427 }
428
429 switch (el.c->size) {
430 case sizeof(struct el_lca_mcheck_short):
431 printk(KERN_CRIT
432 " Reason: %s (short frame%s, dc_stat=%#lx):\n",
433 reason, el.c->retry ? ", retryable" : "",
434 el.s->dc_stat);
435 if (el.s->esr & ESR_EAV) {
436 mem_error(el.s->esr, el.s->ear);
437 }
438 if (el.s->ioc_stat0 & IOC_ERR) {
439 ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
440 }
441 break;
442
443 case sizeof(struct el_lca_mcheck_long):
444 printk(KERN_CRIT " Reason: %s (long frame%s):\n",
445 reason, el.c->retry ? ", retryable" : "");
446 printk(KERN_CRIT
447 " reason: %#lx exc_addr: %#lx dc_stat: %#lx\n",
448 el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
449 printk(KERN_CRIT " car: %#lx\n", el.l->car);
450 if (el.l->esr & ESR_EAV) {
451 mem_error(el.l->esr, el.l->ear);
452 }
453 if (el.l->ioc_stat0 & IOC_ERR) {
454 ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
455 }
456 break;
457
458 default:
459 printk(KERN_CRIT " Unknown errorlog size %d\n", el.c->size);
460 }
461
462 /* Dump the logout area to give all info. */
463 #ifdef CONFIG_VERBOSE_MCHECK
464 if (alpha_verbose_mcheck > 1) {
465 unsigned long * ptr = (unsigned long *) la_ptr;
466 long i;
467 for (i = 0; i < el.c->size / sizeof(long); i += 2) {
468 printk(KERN_CRIT " +%8lx %016lx %016lx\n",
469 i*sizeof(long), ptr[i], ptr[i+1]);
470 }
471 }
472 #endif /* CONFIG_VERBOSE_MCHECK */
473 }
474
475 /*
476 * The following routines are needed to support the SPEED changing
477 * necessary to successfully manage the thermal problem on the AlphaBook1.
478 */
479
480 void
lca_clock_print(void)481 lca_clock_print(void)
482 {
483 long pmr_reg;
484
485 pmr_reg = LCA_READ_PMR;
486
487 printk("Status of clock control:\n");
488 printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
489 printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
490 printk("\tInterrupt override is %s\n",
491 (pmr_reg & LCA_PMR_INTO) ? "on" : "off");
492 printk("\tDMA override is %s\n",
493 (pmr_reg & LCA_PMR_DMAO) ? "on" : "off");
494
495 }
496
497 int
lca_get_clock(void)498 lca_get_clock(void)
499 {
500 long pmr_reg;
501
502 pmr_reg = LCA_READ_PMR;
503 return(LCA_GET_PRIMARY(pmr_reg));
504
505 }
506
507 void
lca_clock_fiddle(int divisor)508 lca_clock_fiddle(int divisor)
509 {
510 long pmr_reg;
511
512 pmr_reg = LCA_READ_PMR;
513 LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
514 /* lca_norm_clock = divisor; */
515 LCA_WRITE_PMR(pmr_reg);
516 mb();
517 }
518