1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
4 */
5
6/dts-v1/;
7#include "at91-sama5d4_ma5d4.dtsi"
8
9/ {
10	model = "Aries/DENX MA5D4EVK";
11	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
12
13	chosen {
14		stdout-path = "serial3:115200n8";
15	};
16
17	ahb {
18		usb0: gadget@400000 {
19			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
20			pinctrl-names = "default";
21			pinctrl-0 = <&pinctrl_usba_vbus>;
22			status = "okay";
23		};
24
25		usb1: ohci@500000 {
26			num-ports = <3>;
27			atmel,vbus-gpio = <0
28					   &pioE 11 GPIO_ACTIVE_LOW
29					   &pioE 14 GPIO_ACTIVE_LOW
30					  >;
31			status = "okay";
32		};
33
34		usb2: ehci@600000 {
35			status = "okay";
36		};
37
38		apb {
39			hlcdc: hlcdc@f0000000 {
40				status = "okay";
41
42				hlcdc-display-controller {
43					pinctrl-names = "default";
44					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
45
46					port@0 {
47						hlcdc_panel_output: endpoint@0 {
48							reg = <0>;
49							remote-endpoint = <&panel_input>;
50						};
51					};
52				};
53
54			};
55
56			macb0: ethernet@f8020000 {
57				phy-mode = "rmii";
58				status = "okay";
59
60				phy0: ethernet-phy@0 {
61					reg = <0>;
62				};
63			};
64
65			usart0: serial@f802c000 {
66				status = "okay";
67			};
68
69			usart1: serial@f8030000 {
70				status = "okay";
71			};
72
73			mmc1: mmc@fc000000 {
74				pinctrl-names = "default";
75				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
76				vmmc-supply = <&vcc_mmc1_reg>;
77				vqmmc-supply = <&vcc_3v3_reg>;
78				status = "okay";
79				slot@0 {
80					reg = <0>;
81					bus-width = <4>;
82					cd-gpios = <&pioE 5 0>;
83				};
84			};
85
86			adc0: adc@fc034000 {
87				atmel,adc-ts-wires = <4>;
88				atmel,adc-ts-pressure-threshold = <10000>;
89			};
90
91
92			pinctrl@fc06a000 {
93				board {
94					pinctrl_mmc1_cd: mmc1_cd {
95						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
96					};
97					pinctrl_usba_vbus: usba_vbus {
98						atmel,pins =
99							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
100					};
101				};
102			};
103		};
104	};
105
106	backlight: backlight {
107		compatible = "pwm-backlight";
108		pwms = <&hlcdc_pwm 0 50000 0>;
109		brightness-levels = <0 4 8 16 32 64 128 255>;
110		default-brightness-level = <6>;
111		status = "okay";
112	};
113
114	leds {
115		compatible = "gpio-leds";
116		status = "okay";
117
118		led-user1 {
119			label = "user1";
120			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
121			linux,default-trigger = "heartbeat";
122		};
123
124		led-user2 {
125			label = "user2";
126			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
127			linux,default-trigger = "heartbeat";
128		};
129
130		led-user3 {
131			label = "user3";
132			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
133			linux,default-trigger = "heartbeat";
134		};
135	};
136
137	panel: panel {
138		/* Actually Ampire 800480R2 */
139		compatible = "foxlink,fl500wvr00-a0t";
140		backlight = <&backlight>;
141		#address-cells = <1>;
142		#size-cells = <0>;
143		status = "okay";
144
145		port@0 {
146			#address-cells = <1>;
147			#size-cells = <0>;
148
149			panel_input: endpoint@0 {
150				reg = <0>;
151				remote-endpoint = <&hlcdc_panel_output>;
152			};
153		};
154	};
155
156	vcc_mmc1_reg: fixedregulator_mmc1 {
157		compatible = "regulator-fixed";
158		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
159		regulator-name = "VDD MCI1";
160		regulator-min-microvolt = <3300000>;
161		regulator-max-microvolt = <3300000>;
162		vin-supply = <&vcc_3v3_reg>;
163	};
164};
165