1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC 4 * applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, 5 * AT91SAM9X25, AT91SAM9X35 SoC 6 * 7 * Copyright (C) 2012 Atmel, 8 * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> 9 */ 10 11#include <dt-bindings/dma/at91.h> 12#include <dt-bindings/pinctrl/at91.h> 13#include <dt-bindings/interrupt-controller/irq.h> 14#include <dt-bindings/gpio/gpio.h> 15#include <dt-bindings/clock/at91.h> 16#include <dt-bindings/mfd/at91-usart.h> 17 18/ { 19 #address-cells = <1>; 20 #size-cells = <1>; 21 model = "Atmel AT91SAM9x5 family SoC"; 22 compatible = "atmel,at91sam9x5"; 23 interrupt-parent = <&aic>; 24 25 aliases { 26 serial0 = &dbgu; 27 serial1 = &usart0; 28 serial2 = &usart1; 29 serial3 = &usart2; 30 gpio0 = &pioA; 31 gpio1 = &pioB; 32 gpio2 = &pioC; 33 gpio3 = &pioD; 34 tcb0 = &tcb0; 35 tcb1 = &tcb1; 36 i2c0 = &i2c0; 37 i2c1 = &i2c1; 38 i2c2 = &i2c2; 39 ssc0 = &ssc0; 40 pwm0 = &pwm0; 41 }; 42 cpus { 43 #address-cells = <1>; 44 #size-cells = <0>; 45 46 cpu@0 { 47 compatible = "arm,arm926ej-s"; 48 device_type = "cpu"; 49 reg = <0>; 50 }; 51 }; 52 53 memory@20000000 { 54 device_type = "memory"; 55 reg = <0x20000000 0x10000000>; 56 }; 57 58 clocks { 59 slow_xtal: slow_xtal { 60 compatible = "fixed-clock"; 61 #clock-cells = <0>; 62 clock-frequency = <0>; 63 }; 64 65 main_xtal: main_xtal { 66 compatible = "fixed-clock"; 67 #clock-cells = <0>; 68 clock-frequency = <0>; 69 }; 70 71 adc_op_clk: adc_op_clk{ 72 compatible = "fixed-clock"; 73 #clock-cells = <0>; 74 clock-frequency = <1000000>; 75 }; 76 }; 77 78 sram: sram@300000 { 79 compatible = "mmio-sram"; 80 reg = <0x00300000 0x8000>; 81 #address-cells = <1>; 82 #size-cells = <1>; 83 ranges = <0 0x00300000 0x8000>; 84 }; 85 86 ahb { 87 compatible = "simple-bus"; 88 #address-cells = <1>; 89 #size-cells = <1>; 90 ranges; 91 92 apb { 93 compatible = "simple-bus"; 94 #address-cells = <1>; 95 #size-cells = <1>; 96 ranges; 97 98 aic: interrupt-controller@fffff000 { 99 #interrupt-cells = <3>; 100 compatible = "atmel,at91rm9200-aic"; 101 interrupt-controller; 102 reg = <0xfffff000 0x200>; 103 atmel,external-irqs = <31>; 104 }; 105 106 matrix: matrix@ffffde00 { 107 compatible = "atmel,at91sam9x5-matrix", "syscon"; 108 reg = <0xffffde00 0x100>; 109 }; 110 111 pmecc: ecc-engine@ffffe000 { 112 compatible = "atmel,at91sam9g45-pmecc"; 113 reg = <0xffffe000 0x600>, 114 <0xffffe600 0x200>; 115 }; 116 117 ramc0: ramc@ffffe800 { 118 compatible = "atmel,at91sam9g45-ddramc"; 119 reg = <0xffffe800 0x200>; 120 clocks = <&pmc PMC_TYPE_SYSTEM 2>; 121 clock-names = "ddrck"; 122 }; 123 124 smc: smc@ffffea00 { 125 compatible = "atmel,at91sam9260-smc", "syscon"; 126 reg = <0xffffea00 0x200>; 127 }; 128 129 pmc: pmc@fffffc00 { 130 compatible = "atmel,at91sam9x5-pmc", "syscon"; 131 reg = <0xfffffc00 0x200>; 132 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 133 #clock-cells = <2>; 134 clocks = <&clk32k>, <&main_xtal>; 135 clock-names = "slow_clk", "main_xtal"; 136 }; 137 138 reset_controller: reset-controller@fffffe00 { 139 compatible = "atmel,at91sam9g45-rstc"; 140 reg = <0xfffffe00 0x10>; 141 clocks = <&clk32k>; 142 }; 143 144 shutdown_controller: shdwc@fffffe10 { 145 compatible = "atmel,at91sam9x5-shdwc"; 146 reg = <0xfffffe10 0x10>; 147 clocks = <&clk32k>; 148 }; 149 150 pit: timer@fffffe30 { 151 compatible = "atmel,at91sam9260-pit"; 152 reg = <0xfffffe30 0xf>; 153 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 154 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; 155 }; 156 157 clk32k: sckc@fffffe50 { 158 compatible = "atmel,at91sam9x5-sckc"; 159 reg = <0xfffffe50 0x4>; 160 clocks = <&slow_xtal>; 161 #clock-cells = <0>; 162 }; 163 164 tcb0: timer@f8008000 { 165 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; 166 #address-cells = <1>; 167 #size-cells = <0>; 168 reg = <0xf8008000 0x100>; 169 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; 170 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; 171 clock-names = "t0_clk", "slow_clk"; 172 }; 173 174 tcb1: timer@f800c000 { 175 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon"; 176 #address-cells = <1>; 177 #size-cells = <0>; 178 reg = <0xf800c000 0x100>; 179 interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; 180 clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>; 181 clock-names = "t0_clk", "slow_clk"; 182 }; 183 184 dma0: dma-controller@ffffec00 { 185 compatible = "atmel,at91sam9g45-dma"; 186 reg = <0xffffec00 0x200>; 187 interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; 188 #dma-cells = <2>; 189 clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; 190 clock-names = "dma_clk"; 191 }; 192 193 dma1: dma-controller@ffffee00 { 194 compatible = "atmel,at91sam9g45-dma"; 195 reg = <0xffffee00 0x200>; 196 interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; 197 #dma-cells = <2>; 198 clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; 199 clock-names = "dma_clk"; 200 }; 201 202 pinctrl: pinctrl@fffff400 { 203 #address-cells = <1>; 204 #size-cells = <1>; 205 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; 206 ranges = <0xfffff400 0xfffff400 0x800>; 207 208 /* shared pinctrl settings */ 209 dbgu { 210 pinctrl_dbgu: dbgu-0 { 211 atmel,pins = 212 <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP 213 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; 214 }; 215 }; 216 217 ebi { 218 pinctrl_ebi_data_0_7: ebi-data-lsb-0 { 219 atmel,pins = 220 <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE 221 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE 222 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE 223 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE 224 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE 225 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE 226 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE 227 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; 228 }; 229 230 pinctrl_ebi_data_8_15: ebi-data-msb-0 { 231 atmel,pins = 232 <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE 233 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE 234 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE 235 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE 236 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE 237 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE 238 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE 239 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; 240 }; 241 242 pinctrl_ebi_addr_nand: ebi-addr-0 { 243 atmel,pins = 244 <AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE 245 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; 246 }; 247 }; 248 249 usart0 { 250 pinctrl_usart0: usart0-0 { 251 atmel,pins = 252 <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE 253 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; 254 }; 255 256 pinctrl_usart0_rts: usart0_rts-0 { 257 atmel,pins = 258 <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA2 periph A */ 259 }; 260 261 pinctrl_usart0_cts: usart0_cts-0 { 262 atmel,pins = 263 <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA3 periph A */ 264 }; 265 266 pinctrl_usart0_sck: usart0_sck-0 { 267 atmel,pins = 268 <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA4 periph A */ 269 }; 270 }; 271 272 usart1 { 273 pinctrl_usart1: usart1-0 { 274 atmel,pins = 275 <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE 276 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; 277 }; 278 279 pinctrl_usart1_rts: usart1_rts-0 { 280 atmel,pins = 281 <AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC27 periph C */ 282 }; 283 284 pinctrl_usart1_cts: usart1_cts-0 { 285 atmel,pins = 286 <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC28 periph C */ 287 }; 288 289 pinctrl_usart1_sck: usart1_sck-0 { 290 atmel,pins = 291 <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ 292 }; 293 }; 294 295 usart2 { 296 pinctrl_usart2: usart2-0 { 297 atmel,pins = 298 <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE 299 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; 300 }; 301 302 pinctrl_usart2_rts: usart2_rts-0 { 303 atmel,pins = 304 <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB0 periph B */ 305 }; 306 307 pinctrl_usart2_cts: usart2_cts-0 { 308 atmel,pins = 309 <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB1 periph B */ 310 }; 311 312 pinctrl_usart2_sck: usart2_sck-0 { 313 atmel,pins = 314 <AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB2 periph B */ 315 }; 316 }; 317 318 uart0 { 319 pinctrl_uart0: uart0-0 { 320 atmel,pins = 321 <AT91_PIOC 8 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC8 periph C */ 322 AT91_PIOC 9 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC9 periph C with pullup */ 323 }; 324 }; 325 326 uart1 { 327 pinctrl_uart1: uart1-0 { 328 atmel,pins = 329 <AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC16 periph C */ 330 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; /* PC17 periph C with pullup */ 331 }; 332 }; 333 334 nand { 335 pinctrl_nand_oe_we: nand-oe-we-0 { 336 atmel,pins = 337 <AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE 338 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; 339 }; 340 341 pinctrl_nand_rb: nand-rb-0 { 342 atmel,pins = 343 <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; 344 }; 345 346 pinctrl_nand_cs: nand-cs-0 { 347 atmel,pins = 348 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; 349 }; 350 }; 351 352 mmc0 { 353 pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { 354 atmel,pins = 355 <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA17 periph A */ 356 AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA16 periph A with pullup */ 357 AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA15 periph A with pullup */ 358 }; 359 360 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { 361 atmel,pins = 362 <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA18 periph A with pullup */ 363 AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PA19 periph A with pullup */ 364 AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA20 periph A with pullup */ 365 }; 366 }; 367 368 mmc1 { 369 pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { 370 atmel,pins = 371 <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA13 periph B */ 372 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA12 periph B with pullup */ 373 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA11 periph B with pullup */ 374 }; 375 376 pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { 377 atmel,pins = 378 <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA2 periph B with pullup */ 379 AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PA3 periph B with pullup */ 380 AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PA4 periph B with pullup */ 381 }; 382 }; 383 384 ssc0 { 385 pinctrl_ssc0_tx: ssc0_tx-0 { 386 atmel,pins = 387 <AT91_PIOA 24 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA24 periph B */ 388 AT91_PIOA 25 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA25 periph B */ 389 AT91_PIOA 26 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA26 periph B */ 390 }; 391 392 pinctrl_ssc0_rx: ssc0_rx-0 { 393 atmel,pins = 394 <AT91_PIOA 27 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA27 periph B */ 395 AT91_PIOA 28 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA28 periph B */ 396 AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA29 periph B */ 397 }; 398 }; 399 400 spi0 { 401 pinctrl_spi0: spi0-0 { 402 atmel,pins = 403 <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA11 periph A SPI0_MISO pin */ 404 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA12 periph A SPI0_MOSI pin */ 405 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA13 periph A SPI0_SPCK pin */ 406 }; 407 }; 408 409 spi1 { 410 pinctrl_spi1: spi1-0 { 411 atmel,pins = 412 <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA21 periph B SPI1_MISO pin */ 413 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* PA22 periph B SPI1_MOSI pin */ 414 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PA23 periph B SPI1_SPCK pin */ 415 }; 416 }; 417 418 i2c0 { 419 pinctrl_i2c0: i2c0-0 { 420 atmel,pins = 421 <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A I2C0 data */ 422 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A I2C0 clock */ 423 }; 424 }; 425 426 i2c1 { 427 pinctrl_i2c1: i2c1-0 { 428 atmel,pins = 429 <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE /* PC0 periph C I2C1 data */ 430 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC1 periph C I2C1 clock */ 431 }; 432 }; 433 434 i2c2 { 435 pinctrl_i2c2: i2c2-0 { 436 atmel,pins = 437 <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB4 periph B I2C2 data */ 438 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PB5 periph B I2C2 clock */ 439 }; 440 }; 441 442 i2c_gpio0 { 443 pinctrl_i2c_gpio0: i2c_gpio0-0 { 444 atmel,pins = 445 <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PA30 gpio multidrive I2C0 data */ 446 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PA31 gpio multidrive I2C0 clock */ 447 }; 448 }; 449 450 i2c_gpio1 { 451 pinctrl_i2c_gpio1: i2c_gpio1-0 { 452 atmel,pins = 453 <AT91_PIOC 0 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PC0 gpio multidrive I2C1 data */ 454 AT91_PIOC 1 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PC1 gpio multidrive I2C1 clock */ 455 }; 456 }; 457 458 i2c_gpio2 { 459 pinctrl_i2c_gpio2: i2c_gpio2-0 { 460 atmel,pins = 461 <AT91_PIOB 4 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE /* PB4 gpio multidrive I2C2 data */ 462 AT91_PIOB 5 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB5 gpio multidrive I2C2 clock */ 463 }; 464 }; 465 466 pwm0 { 467 pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { 468 atmel,pins = 469 <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; 470 }; 471 pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { 472 atmel,pins = 473 <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>; 474 }; 475 pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { 476 atmel,pins = 477 <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>; 478 }; 479 480 pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { 481 atmel,pins = 482 <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; 483 }; 484 pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { 485 atmel,pins = 486 <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>; 487 }; 488 pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { 489 atmel,pins = 490 <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>; 491 }; 492 493 pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { 494 atmel,pins = 495 <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; 496 }; 497 pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { 498 atmel,pins = 499 <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>; 500 }; 501 502 pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { 503 atmel,pins = 504 <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; 505 }; 506 pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { 507 atmel,pins = 508 <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>; 509 }; 510 }; 511 512 tcb0 { 513 pinctrl_tcb0_tclk0: tcb0_tclk0-0 { 514 atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; 515 }; 516 517 pinctrl_tcb0_tclk1: tcb0_tclk1-0 { 518 atmel,pins = <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; 519 }; 520 521 pinctrl_tcb0_tclk2: tcb0_tclk2-0 { 522 atmel,pins = <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; 523 }; 524 525 pinctrl_tcb0_tioa0: tcb0_tioa0-0 { 526 atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; 527 }; 528 529 pinctrl_tcb0_tioa1: tcb0_tioa1-0 { 530 atmel,pins = <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; 531 }; 532 533 pinctrl_tcb0_tioa2: tcb0_tioa2-0 { 534 atmel,pins = <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; 535 }; 536 537 pinctrl_tcb0_tiob0: tcb0_tiob0-0 { 538 atmel,pins = <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; 539 }; 540 541 pinctrl_tcb0_tiob1: tcb0_tiob1-0 { 542 atmel,pins = <AT91_PIOA 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; 543 }; 544 545 pinctrl_tcb0_tiob2: tcb0_tiob2-0 { 546 atmel,pins = <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; 547 }; 548 }; 549 550 tcb1 { 551 pinctrl_tcb1_tclk0: tcb1_tclk0-0 { 552 atmel,pins = <AT91_PIOC 4 AT91_PERIPH_C AT91_PINCTRL_NONE>; 553 }; 554 555 pinctrl_tcb1_tclk1: tcb1_tclk1-0 { 556 atmel,pins = <AT91_PIOC 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; 557 }; 558 559 pinctrl_tcb1_tclk2: tcb1_tclk2-0 { 560 atmel,pins = <AT91_PIOC 14 AT91_PERIPH_C AT91_PINCTRL_NONE>; 561 }; 562 563 pinctrl_tcb1_tioa0: tcb1_tioa0-0 { 564 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_C AT91_PINCTRL_NONE>; 565 }; 566 567 pinctrl_tcb1_tioa1: tcb1_tioa1-0 { 568 atmel,pins = <AT91_PIOC 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; 569 }; 570 571 pinctrl_tcb1_tioa2: tcb1_tioa2-0 { 572 atmel,pins = <AT91_PIOC 12 AT91_PERIPH_C AT91_PINCTRL_NONE>; 573 }; 574 575 pinctrl_tcb1_tiob0: tcb1_tiob0-0 { 576 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_C AT91_PINCTRL_NONE>; 577 }; 578 579 pinctrl_tcb1_tiob1: tcb1_tiob1-0 { 580 atmel,pins = <AT91_PIOC 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; 581 }; 582 583 pinctrl_tcb1_tiob2: tcb1_tiob2-0 { 584 atmel,pins = <AT91_PIOC 13 AT91_PERIPH_C AT91_PINCTRL_NONE>; 585 }; 586 }; 587 588 pioA: gpio@fffff400 { 589 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; 590 reg = <0xfffff400 0x200>; 591 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; 592 #gpio-cells = <2>; 593 gpio-controller; 594 interrupt-controller; 595 #interrupt-cells = <2>; 596 clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; 597 }; 598 599 pioB: gpio@fffff600 { 600 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; 601 reg = <0xfffff600 0x200>; 602 interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; 603 #gpio-cells = <2>; 604 gpio-controller; 605 #gpio-lines = <19>; 606 interrupt-controller; 607 #interrupt-cells = <2>; 608 clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; 609 }; 610 611 pioC: gpio@fffff800 { 612 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; 613 reg = <0xfffff800 0x200>; 614 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; 615 #gpio-cells = <2>; 616 gpio-controller; 617 interrupt-controller; 618 #interrupt-cells = <2>; 619 clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; 620 }; 621 622 pioD: gpio@fffffa00 { 623 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; 624 reg = <0xfffffa00 0x200>; 625 interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; 626 #gpio-cells = <2>; 627 gpio-controller; 628 #gpio-lines = <22>; 629 interrupt-controller; 630 #interrupt-cells = <2>; 631 clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; 632 }; 633 }; 634 635 ssc0: ssc@f0010000 { 636 compatible = "atmel,at91sam9g45-ssc"; 637 reg = <0xf0010000 0x4000>; 638 interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; 639 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>, 640 <&dma0 1 AT91_DMA_CFG_PER_ID(14)>; 641 dma-names = "tx", "rx"; 642 pinctrl-names = "default"; 643 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; 644 clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; 645 clock-names = "pclk"; 646 status = "disabled"; 647 }; 648 649 mmc0: mmc@f0008000 { 650 compatible = "atmel,hsmci"; 651 reg = <0xf0008000 0x600>; 652 interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; 653 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; 654 dma-names = "rxtx"; 655 clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; 656 clock-names = "mci_clk"; 657 #address-cells = <1>; 658 #size-cells = <0>; 659 status = "disabled"; 660 }; 661 662 mmc1: mmc@f000c000 { 663 compatible = "atmel,hsmci"; 664 reg = <0xf000c000 0x600>; 665 interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; 666 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; 667 dma-names = "rxtx"; 668 clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; 669 clock-names = "mci_clk"; 670 #address-cells = <1>; 671 #size-cells = <0>; 672 status = "disabled"; 673 }; 674 675 dbgu: serial@fffff200 { 676 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; 677 reg = <0xfffff200 0x200>; 678 atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 679 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 680 pinctrl-names = "default"; 681 pinctrl-0 = <&pinctrl_dbgu>; 682 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>, 683 <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>; 684 dma-names = "tx", "rx"; 685 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; 686 clock-names = "usart"; 687 status = "disabled"; 688 }; 689 690 usart0: serial@f801c000 { 691 compatible = "atmel,at91sam9260-usart"; 692 reg = <0xf801c000 0x200>; 693 atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 694 interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; 695 pinctrl-names = "default"; 696 pinctrl-0 = <&pinctrl_usart0>; 697 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>, 698 <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; 699 dma-names = "tx", "rx"; 700 clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; 701 clock-names = "usart"; 702 status = "disabled"; 703 }; 704 705 usart1: serial@f8020000 { 706 compatible = "atmel,at91sam9260-usart"; 707 reg = <0xf8020000 0x200>; 708 atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 709 interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; 710 pinctrl-names = "default"; 711 pinctrl-0 = <&pinctrl_usart1>; 712 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>, 713 <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>; 714 dma-names = "tx", "rx"; 715 clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; 716 clock-names = "usart"; 717 status = "disabled"; 718 }; 719 720 usart2: serial@f8024000 { 721 compatible = "atmel,at91sam9260-usart"; 722 reg = <0xf8024000 0x200>; 723 atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 724 interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; 725 pinctrl-names = "default"; 726 pinctrl-0 = <&pinctrl_usart2>; 727 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>, 728 <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>; 729 dma-names = "tx", "rx"; 730 clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; 731 clock-names = "usart"; 732 status = "disabled"; 733 }; 734 735 i2c0: i2c@f8010000 { 736 compatible = "atmel,at91sam9x5-i2c"; 737 reg = <0xf8010000 0x100>; 738 interrupts = <9 IRQ_TYPE_LEVEL_HIGH 6>; 739 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(7)>, 740 <&dma0 1 AT91_DMA_CFG_PER_ID(8)>; 741 dma-names = "tx", "rx"; 742 #address-cells = <1>; 743 #size-cells = <0>; 744 pinctrl-names = "default"; 745 pinctrl-0 = <&pinctrl_i2c0>; 746 clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; 747 status = "disabled"; 748 }; 749 750 i2c1: i2c@f8014000 { 751 compatible = "atmel,at91sam9x5-i2c"; 752 reg = <0xf8014000 0x100>; 753 interrupts = <10 IRQ_TYPE_LEVEL_HIGH 6>; 754 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(5)>, 755 <&dma1 1 AT91_DMA_CFG_PER_ID(6)>; 756 dma-names = "tx", "rx"; 757 #address-cells = <1>; 758 #size-cells = <0>; 759 pinctrl-names = "default"; 760 pinctrl-0 = <&pinctrl_i2c1>; 761 clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; 762 status = "disabled"; 763 }; 764 765 i2c2: i2c@f8018000 { 766 compatible = "atmel,at91sam9x5-i2c"; 767 reg = <0xf8018000 0x100>; 768 interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; 769 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(9)>, 770 <&dma0 1 AT91_DMA_CFG_PER_ID(10)>; 771 dma-names = "tx", "rx"; 772 #address-cells = <1>; 773 #size-cells = <0>; 774 pinctrl-names = "default"; 775 pinctrl-0 = <&pinctrl_i2c2>; 776 clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; 777 status = "disabled"; 778 }; 779 780 uart0: serial@f8040000 { 781 compatible = "atmel,at91sam9260-usart"; 782 reg = <0xf8040000 0x200>; 783 atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 784 interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; 785 pinctrl-names = "default"; 786 pinctrl-0 = <&pinctrl_uart0>; 787 clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; 788 clock-names = "usart"; 789 status = "disabled"; 790 }; 791 792 uart1: serial@f8044000 { 793 compatible = "atmel,at91sam9260-usart"; 794 reg = <0xf8044000 0x200>; 795 atmel,usart-mode = <AT91_USART_MODE_SERIAL>; 796 interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; 797 pinctrl-names = "default"; 798 pinctrl-0 = <&pinctrl_uart1>; 799 clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; 800 clock-names = "usart"; 801 status = "disabled"; 802 }; 803 804 adc0: adc@f804c000 { 805 compatible = "atmel,at91sam9x5-adc"; 806 reg = <0xf804c000 0x100>; 807 interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; 808 clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, 809 <&adc_op_clk>; 810 clock-names = "adc_clk", "adc_op_clk"; 811 atmel,adc-use-external-triggers; 812 atmel,adc-channels-used = <0xffff>; 813 atmel,adc-vref = <3300>; 814 atmel,adc-startup-time = <40>; 815 atmel,adc-sample-hold-time = <11>; 816 }; 817 818 spi0: spi@f0000000 { 819 #address-cells = <1>; 820 #size-cells = <0>; 821 compatible = "atmel,at91rm9200-spi"; 822 reg = <0xf0000000 0x100>; 823 interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; 824 dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(1)>, 825 <&dma0 1 AT91_DMA_CFG_PER_ID(2)>; 826 dma-names = "tx", "rx"; 827 pinctrl-names = "default"; 828 pinctrl-0 = <&pinctrl_spi0>; 829 clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; 830 clock-names = "spi_clk"; 831 status = "disabled"; 832 }; 833 834 spi1: spi@f0004000 { 835 #address-cells = <1>; 836 #size-cells = <0>; 837 compatible = "atmel,at91rm9200-spi"; 838 reg = <0xf0004000 0x100>; 839 interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; 840 dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(1)>, 841 <&dma1 1 AT91_DMA_CFG_PER_ID(2)>; 842 dma-names = "tx", "rx"; 843 pinctrl-names = "default"; 844 pinctrl-0 = <&pinctrl_spi1>; 845 clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; 846 clock-names = "spi_clk"; 847 status = "disabled"; 848 }; 849 850 usb2: gadget@f803c000 { 851 compatible = "atmel,at91sam9g45-udc"; 852 reg = <0x00500000 0x80000 853 0xf803c000 0x400>; 854 interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>; 855 clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>; 856 clock-names = "hclk", "pclk"; 857 status = "disabled"; 858 }; 859 860 watchdog: watchdog@fffffe40 { 861 compatible = "atmel,at91sam9260-wdt"; 862 reg = <0xfffffe40 0x10>; 863 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 864 clocks = <&clk32k>; 865 atmel,watchdog-type = "hardware"; 866 atmel,reset-type = "all"; 867 atmel,dbg-halt; 868 status = "disabled"; 869 }; 870 871 rtc: rtc@fffffeb0 { 872 compatible = "atmel,at91sam9x5-rtc"; 873 reg = <0xfffffeb0 0x40>; 874 interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; 875 clocks = <&clk32k>; 876 status = "disabled"; 877 }; 878 879 pwm0: pwm@f8034000 { 880 compatible = "atmel,at91sam9rl-pwm"; 881 reg = <0xf8034000 0x300>; 882 interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; 883 clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; 884 #pwm-cells = <3>; 885 status = "disabled"; 886 }; 887 }; 888 889 usb0: ohci@600000 { 890 compatible = "atmel,at91rm9200-ohci", "usb-ohci"; 891 reg = <0x00600000 0x100000>; 892 interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; 893 clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; 894 clock-names = "ohci_clk", "hclk", "uhpck"; 895 status = "disabled"; 896 }; 897 898 usb1: ehci@700000 { 899 compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; 900 reg = <0x00700000 0x100000>; 901 interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; 902 clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; 903 clock-names = "usb_clk", "ehci_clk"; 904 status = "disabled"; 905 }; 906 907 ebi: ebi@10000000 { 908 compatible = "atmel,at91sam9x5-ebi"; 909 #address-cells = <2>; 910 #size-cells = <1>; 911 atmel,smc = <&smc>; 912 atmel,matrix = <&matrix>; 913 reg = <0x10000000 0x60000000>; 914 ranges = <0x0 0x0 0x10000000 0x10000000 915 0x1 0x0 0x20000000 0x10000000 916 0x2 0x0 0x30000000 0x10000000 917 0x3 0x0 0x40000000 0x10000000 918 0x4 0x0 0x50000000 0x10000000 919 0x5 0x0 0x60000000 0x10000000>; 920 clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; 921 status = "disabled"; 922 923 nand_controller: nand-controller { 924 compatible = "atmel,at91sam9g45-nand-controller"; 925 ecc-engine = <&pmecc>; 926 #address-cells = <2>; 927 #size-cells = <1>; 928 ranges; 929 status = "disabled"; 930 }; 931 }; 932 }; 933 934 i2c-gpio-0 { 935 compatible = "i2c-gpio"; 936 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ 937 &pioA 31 GPIO_ACTIVE_HIGH /* scl */ 938 >; 939 i2c-gpio,sda-open-drain; 940 i2c-gpio,scl-open-drain; 941 i2c-gpio,delay-us = <2>; /* ~100 kHz */ 942 #address-cells = <1>; 943 #size-cells = <0>; 944 pinctrl-names = "default"; 945 pinctrl-0 = <&pinctrl_i2c_gpio0>; 946 status = "disabled"; 947 }; 948 949 i2c-gpio-1 { 950 compatible = "i2c-gpio"; 951 gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ 952 &pioC 1 GPIO_ACTIVE_HIGH /* scl */ 953 >; 954 i2c-gpio,sda-open-drain; 955 i2c-gpio,scl-open-drain; 956 i2c-gpio,delay-us = <2>; /* ~100 kHz */ 957 #address-cells = <1>; 958 #size-cells = <0>; 959 pinctrl-names = "default"; 960 pinctrl-0 = <&pinctrl_i2c_gpio1>; 961 status = "disabled"; 962 }; 963 964 i2c-gpio-2 { 965 compatible = "i2c-gpio"; 966 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ 967 &pioB 5 GPIO_ACTIVE_HIGH /* scl */ 968 >; 969 i2c-gpio,sda-open-drain; 970 i2c-gpio,scl-open-drain; 971 i2c-gpio,delay-us = <2>; /* ~100 kHz */ 972 #address-cells = <1>; 973 #size-cells = <0>; 974 pinctrl-names = "default"; 975 pinctrl-0 = <&pinctrl_i2c_gpio2>; 976 status = "disabled"; 977 }; 978}; 979