1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos3250 based Monk board device tree source
4 *
5 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
6 *		http://www.samsung.com
7 *
8 * Device tree source file for Samsung's Monk board which is based on
9 * Samsung Exynos3250 SoC.
10 */
11
12/dts-v1/;
13#include "exynos3250.dtsi"
14#include "exynos4412-ppmu-common.dtsi"
15#include <dt-bindings/input/input.h>
16#include <dt-bindings/gpio/gpio.h>
17#include <dt-bindings/clock/samsung,s2mps11.h>
18
19/ {
20	model = "Samsung Monk board";
21	compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
22
23	aliases {
24		i2c7 = &i2c_max77836;
25	};
26
27	memory@40000000 {
28		device_type = "memory";
29		reg = <0x40000000 0x1ff00000>;
30	};
31
32	firmware@205f000 {
33		compatible = "samsung,secure-firmware";
34		reg = <0x0205f000 0x1000>;
35	};
36
37	gpio-keys {
38		compatible = "gpio-keys";
39
40		power-key {
41			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
42			linux,code = <KEY_POWER>;
43			label = "power key";
44			debounce-interval = <10>;
45			wakeup-source;
46		};
47	};
48
49	vemmc_reg: voltage-regulator-0 {
50		compatible = "regulator-fixed";
51		regulator-name = "V_EMMC_2.8V-fixed";
52		regulator-min-microvolt = <2800000>;
53		regulator-max-microvolt = <2800000>;
54		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
55		enable-active-high;
56	};
57
58	i2c_max77836: i2c-gpio-0 {
59		compatible = "i2c-gpio";
60		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
61		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
62		#address-cells = <1>;
63		#size-cells = <0>;
64
65		max77836: pmic@25 {
66			compatible = "maxim,max77836";
67			interrupt-parent = <&gpx1>;
68			interrupts = <5 IRQ_TYPE_NONE>;
69			reg = <0x25>;
70			wakeup-source;
71
72			extcon {
73				compatible = "maxim,max77836-muic";
74			};
75
76			regulators {
77				compatible = "maxim,max77836-regulator";
78				safeout_reg: SAFEOUT {
79					regulator-name = "SAFEOUT";
80				};
81
82				charger_reg: CHARGER {
83					regulator-name = "CHARGER";
84					regulator-min-microamp = <45000>;
85					regulator-max-microamp = <475000>;
86					regulator-boot-on;
87				};
88
89				motor_reg: LDO1 {
90					regulator-name = "MOT_2.7V";
91					regulator-min-microvolt = <1100000>;
92					regulator-max-microvolt = <2700000>;
93				};
94
95				LDO2 {
96					regulator-name = "UNUSED_LDO2";
97					regulator-min-microvolt = <800000>;
98					regulator-max-microvolt = <3950000>;
99				};
100			};
101
102			charger {
103				compatible = "maxim,max77836-charger";
104
105				maxim,constant-uvolt = <4350000>;
106				maxim,fast-charge-uamp = <225000>;
107				maxim,eoc-uamp = <7500>;
108				maxim,ovp-uvolt = <6500000>;
109			};
110		};
111	};
112
113	haptics {
114		compatible = "regulator-haptic";
115		haptic-supply = <&motor_reg>;
116		min-microvolt = <1100000>;
117		max-microvolt = <2700000>;
118	};
119
120	thermal-zones {
121		cpu_thermal: cpu-thermal {
122			cooling-maps {
123				map0 {
124					/* Correspond to 500MHz at freq_table */
125					cooling-device = <&cpu0 5 5>,
126							 <&cpu1 5 5>;
127				};
128				map1 {
129					/* Correspond to 200MHz at freq_table */
130					cooling-device = <&cpu0 8 8>,
131							 <&cpu1 8 8>;
132				};
133			};
134		};
135	};
136};
137
138&adc {
139	vdd-supply = <&ldo3_reg>;
140	status = "okay";
141	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
142	assigned-clock-rates = <6000000>;
143
144	thermistor-ap {
145		compatible = "murata,ncp15wb473";
146		pullup-uv = <1800000>;
147		pullup-ohm = <100000>;
148		pulldown-ohm = <100000>;
149		io-channels = <&adc 0>;
150	};
151
152	thermistor-battery {
153		compatible = "murata,ncp15wb473";
154		pullup-uv = <1800000>;
155		pullup-ohm = <100000>;
156		pulldown-ohm = <100000>;
157		io-channels = <&adc 1>;
158	};
159};
160
161&bus_dmc {
162	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
163	vdd-supply = <&buck1_reg>;
164	status = "okay";
165};
166
167&cmu {
168	clocks = <&xusbxti>;
169};
170
171&cpu0 {
172	cpu0-supply = <&buck2_reg>;
173};
174
175&exynos_usbphy {
176	vbus-supply = <&safeout_reg>;
177	status = "okay";
178};
179
180&gpu {
181	mali-supply = <&buck3_reg>;
182	status = "okay";
183};
184
185&hsotg {
186	vusb_d-supply = <&ldo15_reg>;
187	vusb_a-supply = <&ldo12_reg>;
188	dr_mode = "peripheral";
189	status = "okay";
190};
191
192&i2c_0 {
193	#address-cells = <1>;
194	#size-cells = <0>;
195	samsung,i2c-sda-delay = <100>;
196	samsung,i2c-slave-addr = <0x10>;
197	samsung,i2c-max-bus-freq = <100000>;
198	status = "okay";
199
200	pmic@66 {
201		compatible = "samsung,s2mps14-pmic";
202		interrupt-parent = <&gpx0>;
203		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
204		reg = <0x66>;
205		wakeup-source;
206
207		s2mps14_osc: clocks {
208			compatible = "samsung,s2mps14-clk";
209			#clock-cells = <1>;
210			clock-output-names = "s2mps14_ap", "unused",
211				"s2mps14_bt";
212		};
213
214		regulators {
215			ldo1_reg: LDO1 {
216				regulator-name = "VAP_ALIVE_1.0V";
217				regulator-min-microvolt = <1000000>;
218				regulator-max-microvolt = <1000000>;
219				regulator-always-on;
220			};
221
222			ldo2_reg: LDO2 {
223				regulator-name = "VAP_M1_1.2V";
224				regulator-min-microvolt = <1200000>;
225				regulator-max-microvolt = <1200000>;
226				regulator-always-on;
227			};
228
229			ldo3_reg: LDO3 {
230				regulator-name = "VCC_AP_1.8V";
231				regulator-min-microvolt = <1800000>;
232				regulator-max-microvolt = <1800000>;
233				regulator-always-on;
234			};
235
236			ldo4_reg: LDO4 {
237				regulator-name = "VAP_AVDD_PLL1";
238				regulator-min-microvolt = <1800000>;
239				regulator-max-microvolt = <1800000>;
240				regulator-always-on;
241			};
242
243			ldo5_reg: LDO5 {
244				regulator-name = "VAP_PLL_ISO_1.0V";
245				regulator-min-microvolt = <1000000>;
246				regulator-max-microvolt = <1000000>;
247				regulator-always-on;
248			};
249
250			ldo6_reg: LDO6 {
251				regulator-name = "VAP_MIPI_1.0V";
252				regulator-min-microvolt = <1000000>;
253				regulator-max-microvolt = <1000000>;
254			};
255
256			ldo7_reg: LDO7 {
257				regulator-name = "VAP_AVDD_1.8V";
258				regulator-min-microvolt = <1800000>;
259				regulator-max-microvolt = <1800000>;
260				regulator-always-on;
261			};
262
263			ldo8_reg: LDO8 {
264				regulator-name = "VAP_USB_3.0V";
265				regulator-min-microvolt = <3000000>;
266				regulator-max-microvolt = <3000000>;
267				regulator-always-on;
268			};
269
270			ldo9_reg: LDO9 {
271				regulator-name = "V_LPDDR_1.2V";
272				regulator-min-microvolt = <1200000>;
273				regulator-max-microvolt = <1200000>;
274				regulator-always-on;
275			};
276
277			ldo10_reg: LDO10 {
278				regulator-name = "UNUSED_LDO10";
279				regulator-min-microvolt = <1000000>;
280				regulator-max-microvolt = <1000000>;
281			};
282
283			ldo11_reg: LDO11 {
284				regulator-name = "V_EMMC_1.8V";
285				regulator-min-microvolt = <1800000>;
286				regulator-max-microvolt = <1800000>;
287				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
288			};
289
290			ldo12_reg: LDO12 {
291				regulator-name = "V_EMMC_2.8V";
292				regulator-min-microvolt = <2800000>;
293				regulator-max-microvolt = <2800000>;
294				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
295			};
296
297			ldo13_reg: LDO13 {
298				regulator-name = "VSENSOR_2.85V";
299				regulator-min-microvolt = <2850000>;
300				regulator-max-microvolt = <2850000>;
301				regulator-always-on;
302			};
303
304			ldo14_reg: LDO14 {
305				regulator-name = "UNUSED_LDO14";
306				regulator-min-microvolt = <1800000>;
307				regulator-max-microvolt = <1800000>;
308			};
309
310			ldo15_reg: LDO15 {
311				regulator-name = "TSP_AVDD_3.3V";
312				regulator-min-microvolt = <3300000>;
313				regulator-max-microvolt = <3300000>;
314			};
315
316			ldo16_reg: LDO16 {
317				regulator-name = "LCD_VDD_3.3V";
318				regulator-min-microvolt = <3300000>;
319				regulator-max-microvolt = <3300000>;
320			};
321
322			ldo17_reg: LDO17 {
323				regulator-name = "UNUSED_LDO17";
324				regulator-min-microvolt = <1800000>;
325				regulator-max-microvolt = <1800000>;
326			};
327
328			ldo18_reg: LDO18 {
329				regulator-name = "UNUSED_LDO18";
330				regulator-min-microvolt = <1800000>;
331				regulator-max-microvolt = <1800000>;
332			};
333
334			ldo19_reg: LDO19 {
335				regulator-name = "TSP_VDD_1.8V";
336				regulator-min-microvolt = <1800000>;
337				regulator-max-microvolt = <1800000>;
338			};
339
340			ldo20_reg: LDO20 {
341				regulator-name = "LCD_VDD_1.8V";
342				regulator-min-microvolt = <1800000>;
343				regulator-max-microvolt = <1800000>;
344			};
345
346			ldo21_reg: LDO21 {
347				regulator-name = "UNUSED_LDO21";
348				regulator-min-microvolt = <1000000>;
349				regulator-max-microvolt = <1000000>;
350			};
351
352			ldo22_reg: LDO22 {
353				regulator-name = "UNUSED_LDO22";
354				regulator-min-microvolt = <1000000>;
355				regulator-max-microvolt = <1000000>;
356			};
357
358			ldo23_reg: LDO23 {
359				regulator-name = "UNUSED_LDO23";
360				regulator-min-microvolt = <1000000>;
361				regulator-max-microvolt = <1000000>;
362				regulator-always-on;
363			};
364
365			ldo24_reg: LDO24 {
366				regulator-name = "UNUSED_LDO24";
367				regulator-min-microvolt = <1800000>;
368				regulator-max-microvolt = <1800000>;
369			};
370
371			ldo25_reg: LDO25 {
372				regulator-name = "UNUSED_LDO25";
373				regulator-min-microvolt = <1800000>;
374				regulator-max-microvolt = <1800000>;
375			};
376
377			buck1_reg: BUCK1 {
378				regulator-name = "VAP_MIF_1.0V";
379				regulator-min-microvolt = <800000>;
380				regulator-max-microvolt = <900000>;
381				regulator-always-on;
382			};
383
384			buck2_reg: BUCK2 {
385				regulator-name = "VAP_ARM_1.0V";
386				regulator-min-microvolt = <850000>;
387				regulator-max-microvolt = <1150000>;
388				regulator-always-on;
389			};
390
391			buck3_reg: BUCK3 {
392				regulator-name = "VAP_INT3D_1.0V";
393				regulator-min-microvolt = <850000>;
394				regulator-max-microvolt = <1000000>;
395				regulator-always-on;
396			};
397
398			buck4_reg: BUCK4 {
399				regulator-name = "VCC_SUB_1.95V";
400				regulator-min-microvolt = <1950000>;
401				regulator-max-microvolt = <1950000>;
402				regulator-always-on;
403			};
404
405			buck5_reg: BUCK5 {
406				regulator-name = "VCC_SUB_1.35V";
407				regulator-min-microvolt = <1350000>;
408				regulator-max-microvolt = <1350000>;
409				regulator-always-on;
410			};
411		};
412	};
413};
414
415&i2c_1 {
416	#address-cells = <1>;
417	#size-cells = <0>;
418	samsung,i2c-sda-delay = <100>;
419	samsung,i2c-slave-addr = <0x10>;
420	samsung,i2c-max-bus-freq = <400000>;
421	status = "okay";
422
423	fuelgauge@36 {
424		compatible = "maxim,max77836-battery";
425		interrupt-parent = <&gpx1>;
426		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
427		reg = <0x36>;
428	};
429};
430
431&i2s2 {
432	status = "okay";
433};
434
435&mshc_0 {
436	#address-cells = <1>;
437	#size-cells = <0>;
438	broken-cd;
439	non-removable;
440	cap-mmc-highspeed;
441	mmc-hs200-1_8v;
442	card-detect-delay = <200>;
443	vmmc-supply = <&vemmc_reg>;
444	clock-frequency = <100000000>;
445	max-frequency = <100000000>;
446	samsung,dw-mshc-ciu-div = <1>;
447	samsung,dw-mshc-sdr-timing = <0 1>;
448	samsung,dw-mshc-ddr-timing = <1 2>;
449	pinctrl-names = "default";
450	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
451	bus-width = <8>;
452	status = "okay";
453};
454
455&serial_0 {
456	assigned-clocks = <&cmu CLK_SCLK_UART0>;
457	assigned-clock-rates = <100000000>;
458	status = "okay";
459};
460
461&serial_1 {
462	status = "okay";
463};
464
465&tmu {
466	vtmu-supply = <&ldo7_reg>;
467	status = "okay";
468};
469
470&rtc {
471	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
472	clock-names = "rtc", "rtc_src";
473	status = "okay";
474};
475
476&xusbxti {
477	clock-frequency = <24000000>;
478};
479
480&pinctrl_0 {
481	pinctrl-names = "default";
482	pinctrl-0 = <&sleep0>;
483
484	sleep0: sleep-state {
485		PIN_SLP(gpa0-0, INPUT, DOWN);
486		PIN_SLP(gpa0-1, INPUT, DOWN);
487		PIN_SLP(gpa0-2, INPUT, DOWN);
488		PIN_SLP(gpa0-3, INPUT, DOWN);
489		PIN_SLP(gpa0-4, INPUT, DOWN);
490		PIN_SLP(gpa0-5, INPUT, DOWN);
491		PIN_SLP(gpa0-6, INPUT, DOWN);
492		PIN_SLP(gpa0-7, INPUT, DOWN);
493
494		PIN_SLP(gpa1-0, INPUT, DOWN);
495		PIN_SLP(gpa1-1, INPUT, DOWN);
496		PIN_SLP(gpa1-2, INPUT, DOWN);
497		PIN_SLP(gpa1-3, INPUT, DOWN);
498		PIN_SLP(gpa1-4, INPUT, DOWN);
499		PIN_SLP(gpa1-5, INPUT, DOWN);
500
501		PIN_SLP(gpb-0, PREV, NONE);
502		PIN_SLP(gpb-1, PREV, NONE);
503		PIN_SLP(gpb-2, PREV, NONE);
504		PIN_SLP(gpb-3, PREV, NONE);
505		PIN_SLP(gpb-4, INPUT, DOWN);
506		PIN_SLP(gpb-5, INPUT, DOWN);
507		PIN_SLP(gpb-6, INPUT, DOWN);
508		PIN_SLP(gpb-7, INPUT, DOWN);
509
510		PIN_SLP(gpc0-0, INPUT, DOWN);
511		PIN_SLP(gpc0-1, INPUT, DOWN);
512		PIN_SLP(gpc0-2, INPUT, DOWN);
513		PIN_SLP(gpc0-3, INPUT, DOWN);
514		PIN_SLP(gpc0-4, INPUT, DOWN);
515
516		PIN_SLP(gpc1-0, INPUT, DOWN);
517		PIN_SLP(gpc1-1, INPUT, DOWN);
518		PIN_SLP(gpc1-2, INPUT, DOWN);
519		PIN_SLP(gpc1-3, INPUT, DOWN);
520		PIN_SLP(gpc1-4, INPUT, DOWN);
521
522		PIN_SLP(gpd0-0, INPUT, DOWN);
523		PIN_SLP(gpd0-1, INPUT, DOWN);
524		PIN_SLP(gpd0-2, INPUT, NONE);
525		PIN_SLP(gpd0-3, INPUT, NONE);
526
527		PIN_SLP(gpd1-0, INPUT, NONE);
528		PIN_SLP(gpd1-1, INPUT, NONE);
529		PIN_SLP(gpd1-2, INPUT, NONE);
530		PIN_SLP(gpd1-3, INPUT, NONE);
531	};
532};
533
534&pinctrl_1 {
535	pinctrl-names = "default";
536	pinctrl-0 = <&initial1 &sleep1>;
537
538	initial1: initial-state {
539		PIN_IN(gpk2-0, DOWN, LV1);
540		PIN_IN(gpk2-1, DOWN, LV1);
541		PIN_IN(gpk2-2, DOWN, LV1);
542		PIN_IN(gpk2-3, DOWN, LV1);
543		PIN_IN(gpk2-4, DOWN, LV1);
544		PIN_IN(gpk2-5, DOWN, LV1);
545		PIN_IN(gpk2-6, DOWN, LV1);
546	};
547
548	sleep1: sleep-state {
549		PIN_SLP(gpe0-0, PREV, NONE);
550		PIN_SLP(gpe0-1, PREV, NONE);
551		PIN_SLP(gpe0-2, INPUT, DOWN);
552		PIN_SLP(gpe0-3, INPUT, DOWN);
553		PIN_SLP(gpe0-4, PREV, NONE);
554		PIN_SLP(gpe0-5, INPUT, DOWN);
555		PIN_SLP(gpe0-6, INPUT, DOWN);
556		PIN_SLP(gpe0-7, INPUT, DOWN);
557
558		PIN_SLP(gpe1-0, INPUT, DOWN);
559		PIN_SLP(gpe1-1, PREV, NONE);
560		PIN_SLP(gpe1-2, INPUT, DOWN);
561		PIN_SLP(gpe1-3, INPUT, DOWN);
562		PIN_SLP(gpe1-4, INPUT, DOWN);
563		PIN_SLP(gpe1-5, INPUT, DOWN);
564		PIN_SLP(gpe1-6, INPUT, DOWN);
565		PIN_SLP(gpe1-7, INPUT, NONE);
566
567		PIN_SLP(gpe2-0, INPUT, NONE);
568		PIN_SLP(gpe2-1, INPUT, NONE);
569		PIN_SLP(gpe2-2, INPUT, NONE);
570
571		PIN_SLP(gpk0-0, INPUT, DOWN);
572		PIN_SLP(gpk0-1, INPUT, DOWN);
573		PIN_SLP(gpk0-2, OUT0, NONE);
574		PIN_SLP(gpk0-3, INPUT, DOWN);
575		PIN_SLP(gpk0-4, INPUT, DOWN);
576		PIN_SLP(gpk0-5, INPUT, DOWN);
577		PIN_SLP(gpk0-6, INPUT, DOWN);
578		PIN_SLP(gpk0-7, INPUT, DOWN);
579
580		PIN_SLP(gpk1-0, PREV, NONE);
581		PIN_SLP(gpk1-1, PREV, NONE);
582		PIN_SLP(gpk1-2, INPUT, DOWN);
583		PIN_SLP(gpk1-3, PREV, NONE);
584		PIN_SLP(gpk1-4, PREV, NONE);
585		PIN_SLP(gpk1-5, PREV, NONE);
586		PIN_SLP(gpk1-6, PREV, NONE);
587
588		PIN_SLP(gpk2-0, INPUT, DOWN);
589		PIN_SLP(gpk2-1, INPUT, DOWN);
590		PIN_SLP(gpk2-2, INPUT, DOWN);
591		PIN_SLP(gpk2-3, INPUT, DOWN);
592		PIN_SLP(gpk2-4, INPUT, DOWN);
593		PIN_SLP(gpk2-5, INPUT, DOWN);
594		PIN_SLP(gpk2-6, INPUT, DOWN);
595
596		PIN_SLP(gpl0-0, INPUT, DOWN);
597		PIN_SLP(gpl0-1, INPUT, DOWN);
598		PIN_SLP(gpl0-2, INPUT, DOWN);
599		PIN_SLP(gpl0-3, INPUT, DOWN);
600
601		PIN_SLP(gpm0-0, INPUT, DOWN);
602		PIN_SLP(gpm0-1, INPUT, DOWN);
603		PIN_SLP(gpm0-2, INPUT, DOWN);
604		PIN_SLP(gpm0-3, INPUT, DOWN);
605		PIN_SLP(gpm0-4, INPUT, DOWN);
606		PIN_SLP(gpm0-5, INPUT, DOWN);
607		PIN_SLP(gpm0-6, INPUT, DOWN);
608		PIN_SLP(gpm0-7, INPUT, DOWN);
609
610		PIN_SLP(gpm1-0, INPUT, DOWN);
611		PIN_SLP(gpm1-1, INPUT, DOWN);
612		PIN_SLP(gpm1-2, INPUT, DOWN);
613		PIN_SLP(gpm1-3, INPUT, DOWN);
614		PIN_SLP(gpm1-4, INPUT, DOWN);
615		PIN_SLP(gpm1-5, INPUT, DOWN);
616		PIN_SLP(gpm1-6, INPUT, DOWN);
617
618		PIN_SLP(gpm2-0, INPUT, DOWN);
619		PIN_SLP(gpm2-1, INPUT, DOWN);
620		PIN_SLP(gpm2-2, INPUT, DOWN);
621		PIN_SLP(gpm2-3, INPUT, DOWN);
622		PIN_SLP(gpm2-4, INPUT, DOWN);
623
624		PIN_SLP(gpm3-0, INPUT, DOWN);
625		PIN_SLP(gpm3-1, INPUT, DOWN);
626		PIN_SLP(gpm3-2, INPUT, DOWN);
627		PIN_SLP(gpm3-3, INPUT, DOWN);
628		PIN_SLP(gpm3-4, INPUT, DOWN);
629		PIN_SLP(gpm3-5, INPUT, DOWN);
630		PIN_SLP(gpm3-6, INPUT, DOWN);
631		PIN_SLP(gpm3-7, INPUT, DOWN);
632
633		PIN_SLP(gpm4-0, INPUT, DOWN);
634		PIN_SLP(gpm4-1, INPUT, DOWN);
635		PIN_SLP(gpm4-2, INPUT, DOWN);
636		PIN_SLP(gpm4-3, INPUT, DOWN);
637		PIN_SLP(gpm4-4, INPUT, DOWN);
638		PIN_SLP(gpm4-5, INPUT, DOWN);
639		PIN_SLP(gpm4-6, INPUT, DOWN);
640		PIN_SLP(gpm4-7, INPUT, DOWN);
641	};
642};
643