1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Free Electrons
4 */
5
6/*
7 * The CFA-10055 is an expansion board for the CFA-10036 module and
8 * CFA-10037, thus we need to include the CFA-10037 DTS.
9 */
10#include "imx28-cfa10037.dts"
11
12/ {
13	model = "Crystalfontz CFA-10056 Board";
14	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
15
16	apb@80000000 {
17		apbh@80000000 {
18			pinctrl@80018000 {
19				spi2_pins_cfa10056: spi2-cfa10056@0 {
20					reg = <0>;
21					fsl,pinmux-ids = <
22						MX28_PAD_SSP2_SCK__GPIO_2_16
23						MX28_PAD_SSP2_MOSI__GPIO_2_17
24						MX28_PAD_SSP2_MISO__GPIO_2_18
25						MX28_PAD_AUART1_TX__GPIO_3_5
26					>;
27					fsl,drive-strength = <MXS_DRIVE_8mA>;
28					fsl,voltage = <MXS_VOLTAGE_HIGH>;
29					fsl,pull-up = <MXS_PULL_ENABLE>;
30				};
31
32				lcdif_pins_cfa10056: lcdif-10056@0 {
33					reg = <0>;
34					fsl,pinmux-ids = <
35						MX28_PAD_LCD_RD_E__LCD_VSYNC
36						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
37						MX28_PAD_LCD_RS__LCD_DOTCLK
38						MX28_PAD_LCD_CS__LCD_ENABLE
39					>;
40					fsl,drive-strength = <MXS_DRIVE_4mA>;
41					fsl,voltage = <MXS_VOLTAGE_HIGH>;
42					fsl,pull-up = <MXS_PULL_DISABLE>;
43				};
44
45				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
46					reg = <0>;
47					fsl,pinmux-ids = <
48						MX28_PAD_LCD_RESET__GPIO_3_30
49					>;
50					fsl,drive-strength = <MXS_DRIVE_4mA>;
51					fsl,voltage = <MXS_VOLTAGE_HIGH>;
52					fsl,pull-up = <MXS_PULL_ENABLE>;
53				};
54			};
55
56			lcdif@80030000 {
57				pinctrl-names = "default";
58				pinctrl-0 = <&lcdif_24bit_pins_a
59						&lcdif_pins_cfa10056
60						&lcdif_pins_cfa10056_pullup >;
61				display = <&display0>;
62				status = "okay";
63
64				display0: display0 {
65					bits-per-pixel = <32>;
66					bus-width = <24>;
67
68					display-timings {
69						native-mode = <&timing0>;
70						timing0: timing0 {
71							clock-frequency = <32000000>;
72							hactive = <480>;
73							vactive = <800>;
74							hback-porch = <2>;
75							hfront-porch = <2>;
76							vback-porch = <2>;
77							vfront-porch = <2>;
78							hsync-len = <5>;
79							vsync-len = <5>;
80							hsync-active = <0>;
81							vsync-active = <0>;
82							de-active = <1>;
83							pixelclk-active = <1>;
84						};
85					};
86				};
87			};
88		};
89	};
90
91	spi-2 {
92		compatible = "spi-gpio";
93		pinctrl-names = "default";
94		pinctrl-0 = <&spi2_pins_cfa10056>;
95		status = "okay";
96		gpio-sck = <&gpio2 16 0>;
97		gpio-mosi = <&gpio2 17 0>;
98		gpio-miso = <&gpio2 18 0>;
99		cs-gpios = <&gpio3 5 0>;
100		num-chipselects = <1>;
101		#address-cells = <1>;
102		#size-cells = <0>;
103
104		hx8369: hx8369@0 {
105			compatible = "himax,hx8369a", "himax,hx8369";
106			reg = <0>;
107			spi-max-frequency = <100000>;
108			spi-cpol;
109			spi-cpha;
110			gpios-reset = <&gpio3 30 0>;
111		};
112	};
113};
114