1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (c) 2016 Protonic Holland
4 * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
5 */
6
7/dts-v1/;
8#include <dt-bindings/display/sdtv-standards.h>
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/leds/common.h>
12#include <dt-bindings/media/tvp5150.h>
13#include <dt-bindings/sound/fsl-imx-audmux.h>
14#include "imx6dl.dtsi"
15
16/ {
17	model = "Protonic MVT board";
18	compatible = "prt,prtmvt", "fsl,imx6dl";
19
20	chosen {
21		stdout-path = &uart4;
22	};
23
24	backlight: backlight {
25		compatible = "pwm-backlight";
26		pinctrl-names = "default";
27		pinctrl-0 = <&pinctrl_backlight>;
28		pwms = <&pwm1 0 5000000 0>;
29		brightness-levels = <0 16 64 255>;
30		num-interpolated-steps = <16>;
31		default-brightness-level = <1>;
32		power-supply = <&reg_3v3>;
33		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
34	};
35
36	connector {
37		compatible = "composite-video-connector";
38		label = "Composite0";
39		sdtv-standards = <SDTV_STD_PAL_B>;
40
41		port {
42			comp0_out: endpoint {
43				remote-endpoint = <&tvp5150_comp0_in>;
44			};
45		};
46	};
47
48	gpio-keys {
49		compatible = "gpio-keys";
50		pinctrl-names = "default";
51		pinctrl-0 = <&pinctrl_gpiokeys>;
52		autorepeat;
53
54		key-power {
55			label = "Power Button";
56			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
57			linux,code = <KEY_POWER>;
58			wakeup-source;
59		};
60
61		key-f1 {
62			label = "GPIO Key F1";
63			linux,code = <KEY_F1>;
64			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
65		};
66
67		key-f2 {
68			label = "GPIO Key F2";
69			linux,code = <KEY_F2>;
70			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
71		};
72
73		key-f3 {
74			label = "GPIO Key F3";
75			linux,code = <KEY_F3>;
76			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
77		};
78
79		key-f4 {
80			label = "GPIO Key F4";
81			linux,code = <KEY_F4>;
82			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
83		};
84
85		key-f5 {
86			label = "GPIO Key F5";
87			linux,code = <KEY_F5>;
88			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
89		};
90
91		key-cycle {
92			label = "GPIO Key CYCLE";
93			linux,code = <KEY_CYCLEWINDOWS>;
94			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
95		};
96
97		key-esc {
98			label = "GPIO Key ESC";
99			linux,code = <KEY_ESC>;
100			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
101		};
102
103		key-up {
104			label = "GPIO Key UP";
105			linux,code = <KEY_UP>;
106			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
107		};
108
109		key-down {
110			label = "GPIO Key DOWN";
111			linux,code = <KEY_DOWN>;
112			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
113		};
114
115		key-ok {
116			label = "GPIO Key OK";
117			linux,code = <KEY_OK>;
118			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
119		};
120
121		key-f6 {
122			label = "GPIO Key F6";
123			linux,code = <KEY_F6>;
124			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
125		};
126
127		key-f7 {
128			label = "GPIO Key F7";
129			linux,code = <KEY_F7>;
130			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
131		};
132
133		key-f8 {
134			label = "GPIO Key F8";
135			linux,code = <KEY_F8>;
136			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
137		};
138
139		key-f9 {
140			label = "GPIO Key F9";
141			linux,code = <KEY_F9>;
142			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
143		};
144
145		key-f10 {
146			label = "GPIO Key F10";
147			linux,code = <KEY_F10>;
148			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
149		};
150
151	};
152
153	leds {
154		compatible = "gpio-leds";
155		pinctrl-names = "default";
156		pinctrl-0 = <&pinctrl_leds>;
157
158		led-0 {
159			label = "debug0";
160			function = LED_FUNCTION_HEARTBEAT;
161			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
162			linux,default-trigger = "heartbeat";
163		};
164
165		led-1 {
166			label = "debug1";
167			function = LED_FUNCTION_DISK;
168			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
169			linux,default-trigger = "disk-activity";
170		};
171
172		led-2 {
173			label = "power_led";
174			function = LED_FUNCTION_POWER;
175			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
176			default-state = "on";
177		};
178	};
179
180	panel {
181		compatible = "kyo,tcg070wvlq", "lg,lb070wv8";
182		backlight = <&backlight>;
183		power-supply = <&reg_3v3>;
184
185		port {
186			panel_in: endpoint {
187				remote-endpoint = <&lvds0_out>;
188			};
189		};
190	};
191
192	clk50m_phy: phy-clock {
193		compatible = "fixed-clock";
194		#clock-cells = <0>;
195		clock-frequency = <50000000>;
196	};
197
198	reg_1v8: regulator-1v8 {
199		compatible = "regulator-fixed";
200		regulator-name = "1v8";
201		regulator-min-microvolt = <1800000>;
202		regulator-max-microvolt = <1800000>;
203	};
204
205	reg_3v3: regulator-3v3 {
206		compatible = "regulator-fixed";
207		regulator-name = "3v3";
208		regulator-min-microvolt = <3300000>;
209		regulator-max-microvolt = <3300000>;
210	};
211
212	reg_h1_vbus: regulator-h1-vbus {
213		compatible = "regulator-fixed";
214		regulator-name = "h1-vbus";
215		regulator-min-microvolt = <5000000>;
216		regulator-max-microvolt = <5000000>;
217		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
218		enable-active-high;
219	};
220
221	reg_otg_vbus: regulator-otg-vbus {
222		compatible = "regulator-fixed";
223		regulator-name = "otg-vbus";
224		regulator-min-microvolt = <5000000>;
225		regulator-max-microvolt = <5000000>;
226		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
227		enable-active-high;
228	};
229
230	sound {
231		compatible = "simple-audio-card";
232		simple-audio-card,name = "prti6q-sgtl5000";
233		simple-audio-card,format = "i2s";
234		simple-audio-card,widgets =
235			"Microphone", "Microphone Jack",
236			"Line", "Line In Jack",
237			"Headphone", "Headphone Jack",
238			"Speaker", "External Speaker";
239		simple-audio-card,routing =
240			"MIC_IN", "Microphone Jack",
241			"LINE_IN", "Line In Jack",
242			"Headphone Jack", "HP_OUT",
243			"External Speaker", "LINE_OUT";
244
245		simple-audio-card,cpu {
246			sound-dai = <&ssi1>;
247			system-clock-frequency = <0>;
248		};
249
250		simple-audio-card,codec {
251			sound-dai = <&codec>;
252			bitclock-master;
253			frame-master;
254		};
255	};
256};
257
258&audmux {
259	pinctrl-names = "default";
260	pinctrl-0 = <&pinctrl_audmux>;
261	status = "okay";
262
263	mux-ssi1 {
264		fsl,audmux-port = <0>;
265		fsl,port-config = <
266			IMX_AUDMUX_V2_PTCR_SYN		0
267			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
268			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
269			IMX_AUDMUX_V2_PTCR_TFSDIR	0
270			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
271		>;
272	};
273
274	mux-pins3 {
275		fsl,audmux-port = <2>;
276		fsl,port-config = <
277			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
278			0				IMX_AUDMUX_V2_PDCR_TXRXEN
279		>;
280	};
281};
282
283&can1 {
284	pinctrl-names = "default";
285	pinctrl-0 = <&pinctrl_can1>;
286	status = "okay";
287};
288
289&can2 {
290	pinctrl-names = "default";
291	pinctrl-0 = <&pinctrl_can2>;
292	status = "okay";
293};
294
295&clks {
296	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
297	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
298};
299
300&ecspi1 {
301	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
302	pinctrl-names = "default";
303	pinctrl-0 = <&pinctrl_ecspi1>;
304	status = "okay";
305
306	flash@0 {
307		compatible = "jedec,spi-nor";
308		reg = <0>;
309		spi-max-frequency = <20000000>;
310	};
311};
312
313&fec {
314	pinctrl-names = "default";
315	pinctrl-0 = <&pinctrl_enet>;
316	phy-mode = "rmii";
317	clocks = <&clks IMX6QDL_CLK_ENET>,
318		 <&clks IMX6QDL_CLK_ENET>,
319		 <&clk50m_phy>;
320	clock-names = "ipg", "ahb", "ptp";
321	phy-handle = <&rmii_phy>;
322	status = "okay";
323
324	mdio {
325		#address-cells = <1>;
326		#size-cells = <0>;
327
328		/* Microchip KSZ8081RNA PHY */
329		rmii_phy: ethernet-phy@0 {
330			reg = <0>;
331			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
332			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
333			reset-assert-us = <10000>;
334			reset-deassert-us = <3000>;
335		};
336	};
337};
338
339&gpio1 {
340	gpio-line-names =
341		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
342			"CAM2_MIRROR", "", "", "SMBALERT",
343		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
344		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
345			"SD1_DATA3", "", "",
346		"", "", "", "", "", "", "", "";
347};
348
349&gpio2 {
350	gpio-line-names =
351		"", "", "", "", "", "", "", "",
352		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
353			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
354		"", "", "", "", "", "", "", "ON_SWITCH",
355		"POWER_LED", "", "", "", "", "", "", "";
356};
357
358&gpio3 {
359	gpio-line-names =
360		"", "", "", "", "", "", "", "",
361		"", "", "", "", "", "", "", "",
362		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
363			"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
364		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
365			"YACO_RESET";
366};
367
368&gpio4 {
369	gpio-line-names =
370		"", "", "", "", "", "", "", "",
371		"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
372		"", "", "DIP1_FB", "", "", "", "", "",
373		"CPU_LIGHT_ON", "", "ETH_RESET", "", "BL_EN",
374			"BL_PWM", "ETH_INTRP", "";
375};
376
377&gpio5 {
378	gpio-line-names =
379		"", "", "", "", "", "", "", "",
380		"", "", "", "", "", "", "", "",
381		"", "", "", "", "", "", "", "",
382		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
383			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
384};
385
386&i2c1 {
387	clock-frequency = <100000>;
388	pinctrl-names = "default";
389	pinctrl-0 = <&pinctrl_i2c1>;
390	status = "okay";
391
392	codec: audio-codec@a {
393		compatible = "fsl,sgtl5000";
394		reg = <0xa>;
395		#sound-dai-cells = <0>;
396		clocks = <&clks 201>;
397		VDDA-supply = <&reg_3v3>;
398		VDDIO-supply = <&reg_3v3>;
399		VDDD-supply = <&reg_1v8>;
400	};
401
402	video@5c {
403		compatible = "ti,tvp5150";
404		reg = <0x5c>;
405		#address-cells = <1>;
406		#size-cells = <0>;
407
408		port@0 {
409			reg = <0>;
410
411			tvp5150_comp0_in: endpoint {
412				remote-endpoint = <&comp0_out>;
413			};
414		};
415
416		/* Output port 2 is video output pad */
417		port@2 {
418			reg = <2>;
419			tvp5151_to_ipu1_csi0_mux: endpoint {
420				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
421			};
422		};
423	};
424
425	gpio_pca: gpio@74 {
426		compatible = "nxp,pca9539";
427		reg = <0x74>;
428		pinctrl-names = "default";
429		pinctrl-0 = <&pinctrl_pca9539>;
430		interrupt-parent = <&gpio4>;
431		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
432		gpio-controller;
433		#gpio-cells = <2>;
434	};
435
436	/* additional i2c devices are added automatically by the boot loader */
437};
438
439&i2c3 {
440	clock-frequency = <100000>;
441	pinctrl-names = "default";
442	pinctrl-0 = <&pinctrl_i2c3>;
443	status = "okay";
444
445	adc@49 {
446		compatible = "ti,ads1015";
447		reg = <0x49>;
448		#address-cells = <1>;
449		#size-cells = <0>;
450
451		channel@4 {
452			reg = <4>;
453			ti,gain = <3>;
454			ti,datarate = <3>;
455		};
456
457		channel@5 {
458			reg = <5>;
459			ti,gain = <3>;
460			ti,datarate = <3>;
461		};
462
463		channel@6 {
464			reg = <6>;
465			ti,gain = <3>;
466			ti,datarate = <3>;
467		};
468
469		channel@7 {
470			reg = <7>;
471			ti,gain = <3>;
472			ti,datarate = <3>;
473		};
474	};
475
476	rtc@51 {
477		compatible = "nxp,pcf8563";
478		reg = <0x51>;
479	};
480
481	temperature-sensor@70 {
482		compatible = "ti,tmp103";
483		reg = <0x70>;
484	};
485};
486
487&ipu1_csi0 {
488	pinctrl-names = "default";
489	pinctrl-0 = <&pinctrl_ipu1_csi0>;
490	status = "okay";
491};
492
493&ipu1_csi0_mux_from_parallel_sensor {
494	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
495};
496
497&ldb {
498	status = "okay";
499
500	lvds-channel@0 {
501		status = "okay";
502
503		port@4 {
504			reg = <4>;
505
506			lvds0_out: endpoint {
507				remote-endpoint = <&panel_in>;
508			};
509		};
510	};
511};
512
513&pcie {
514	status = "okay";
515};
516
517&pwm1 {
518	pinctrl-names = "default";
519	pinctrl-0 = <&pinctrl_pwm1>;
520	status = "okay";
521};
522
523&ssi1 {
524	#sound-dai-cells = <0>;
525	fsl,mode = "ac97-slave";
526	status = "okay";
527};
528
529&uart1 {
530	pinctrl-names = "default";
531	pinctrl-0 = <&pinctrl_uart1>;
532	status = "okay";
533};
534
535&uart2 {
536	pinctrl-names = "default";
537	pinctrl-0 = <&pinctrl_uart2>;
538	status = "okay";
539};
540
541&uart3 {
542	pinctrl-names = "default";
543	pinctrl-0 = <&pinctrl_uart3>;
544	status = "okay";
545};
546
547&uart4 {
548	pinctrl-names = "default";
549	pinctrl-0 = <&pinctrl_uart4>;
550	status = "okay";
551};
552
553&uart5 {
554	pinctrl-names = "default";
555	pinctrl-0 = <&pinctrl_uart5>;
556	status = "okay";
557};
558
559&usbh1 {
560	vbus-supply = <&reg_h1_vbus>;
561	pinctrl-names = "default";
562	phy_type = "utmi";
563	dr_mode = "host";
564	status = "okay";
565};
566
567&usbotg {
568	vbus-supply = <&reg_otg_vbus>;
569	pinctrl-names = "default";
570	pinctrl-0 = <&pinctrl_usbotg>;
571	phy_type = "utmi";
572	dr_mode = "host";
573	disable-over-current;
574	status = "okay";
575};
576
577&usdhc1 {
578	pinctrl-names = "default";
579	pinctrl-0 = <&pinctrl_usdhc1>;
580	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
581	no-1-8-v;
582	disable-wp;
583	cap-sd-highspeed;
584	no-mmc;
585	no-sdio;
586	status = "okay";
587};
588
589&usdhc3 {
590	pinctrl-names = "default";
591	pinctrl-0 = <&pinctrl_usdhc3>;
592	bus-width = <8>;
593	no-1-8-v;
594	non-removable;
595	no-sd;
596	no-sdio;
597	status = "okay";
598};
599
600&iomuxc {
601	pinctrl-names = "default";
602	pinctrl-0 = <&pinctrl_hog>;
603
604	pinctrl_audmux: audmuxgrp {
605		fsl,pins = <
606			/* SGTL5000 sys_mclk */
607			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
608			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
609			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
610			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
611			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
612		>;
613	};
614
615	pinctrl_backlight: backlightgrp {
616		fsl,pins = <
617			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
618		>;
619	};
620
621	pinctrl_can1: can1grp {
622		fsl,pins = <
623			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
624			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
625			/* CAN1_SR */
626			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
627			/* CAN1_TERM */
628			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
629		>;
630	};
631
632	pinctrl_can2: can2grp {
633		fsl,pins = <
634			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
635			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
636			/* CAN2_SR */
637			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
638		>;
639	};
640
641	pinctrl_ecspi1: ecspi1grp {
642		fsl,pins = <
643			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
644			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
645			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
646			/* CS */
647			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
648		>;
649	};
650
651	pinctrl_enet: enetgrp {
652		fsl,pins = <
653			/* MX6QDL_ENET_PINGRP4 */
654			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
655			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
656			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
657			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
658			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
659			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
660			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
661			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
662			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
663			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
664			/* Phy reset */
665			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
666			/* nINTRP */
667			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
668		>;
669	};
670
671	pinctrl_gpiokeys: gpiokeygrp {
672		fsl,pins = <
673			/* nON_SWITCH */
674			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
675		>;
676	};
677
678	pinctrl_hog: hoggrp {
679		fsl,pins = <
680			/* ITU656_nRESET */
681			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
682			/* CAM1_MIRROR */
683			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
684			/* CAM2_MIRROR */
685			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
686			/* CAM_nDETECT */
687			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
688			/* ISB_IN1 */
689			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
690			/* ISB_nIN2 */
691			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
692			/* WARN_LIGHT */
693			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
694			/* ON2_FB */
695			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
696			/* YACO_nIRQ */
697			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
698			/* YACO_BOOT0 */
699			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
700			/* YACO_nRESET */
701			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
702			/* FORCE_ON1 */
703			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
704			/* AUDIO_nRESET */
705			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
706			/* ITU656_nPDN */
707			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
708
709			/* HW revision detect */
710			/* REV_ID0 */
711			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
712			/* REV_ID1 */
713			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09			0x1b0b0
714			/* REV_ID2 */
715			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
716			/* REV_ID3 */
717			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
718			/* REV_ID4 */
719			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
720
721			/* New in HW revision 1 */
722			/* ON1_FB */
723			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
724			/* DIP1_FB */
725			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
726		>;
727	};
728
729	pinctrl_i2c1: i2c1grp {
730		fsl,pins = <
731			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
732			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
733		>;
734	};
735
736	pinctrl_i2c3: i2c3grp {
737		fsl,pins = <
738			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
739			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
740		>;
741	};
742
743	pinctrl_ipu1_csi0: ipu1csi0grp {
744		fsl,pins = <
745			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
746			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
747			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
748			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
749			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
750			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
751			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
752			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
753			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
754		>;
755	};
756
757	pinctrl_leds: ledsgrp {
758		fsl,pins = <
759			/* DEBUG0 */
760			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
761			/* DEBUG1 */
762			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
763			/* POWER_LED */
764			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
765		>;
766	};
767
768	pinctrl_pca9539: pca9539 {
769		fsl,pins = <
770			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
771		>;
772	};
773
774	pinctrl_pwm1: pwm1grp {
775		fsl,pins = <
776			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
777		>;
778	};
779
780	/* YaCO AUX Uart */
781	pinctrl_uart1: uart1grp {
782		fsl,pins = <
783			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
784			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
785		>;
786	};
787
788	pinctrl_uart2: uart2grp {
789		fsl,pins = <
790			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
791			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
792		>;
793	};
794
795	/* YaCO Touchscreen UART */
796	pinctrl_uart3: uart3grp {
797		fsl,pins = <
798			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
799			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
800		>;
801	};
802
803	pinctrl_uart4: uart4grp {
804		fsl,pins = <
805			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
806			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
807		>;
808	};
809
810	pinctrl_uart5: uart5grp {
811		fsl,pins = <
812			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
813			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
814		>;
815	};
816
817	pinctrl_usbotg: usbotggrp {
818		fsl,pins = <
819			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
820			/* power enable, high active */
821			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
822		>;
823	};
824
825	pinctrl_usdhc1: usdhc1grp {
826		fsl,pins = <
827			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
828			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
829			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
830			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
831			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
832			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
833			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
834		>;
835	};
836
837	pinctrl_usdhc3: usdhc3grp {
838		fsl,pins = <
839			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
840			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
841			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
842			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
843			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
844			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
845			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
846			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
847			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
848			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
849			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
850		>;
851	};
852};
853