1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2//
3// Copyright 2015 Technexion Ltd.
4//
5// Author: Wig Cheng  <wig.cheng@technexion.com>
6//	   Richard Hu <richard.hu@technexion.com>
7//	   Tapani Utriainen <tapani@technexion.com>
8/dts-v1/;
9
10#include "imx6ul-pico.dtsi"
11/ {
12	model = "TechNexion PICO-IMX6UL and HOBBIT baseboard";
13	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
14
15	leds {
16		compatible = "gpio-leds";
17		pinctrl-names = "default";
18		pinctrl-0 = <&pinctrl_gpio_leds>;
19
20		led {
21			label = "gpio-led";
22			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
23		};
24	};
25
26	sound {
27		compatible = "fsl,imx-audio-sgtl5000";
28		model = "imx6ul-sgtl5000";
29		audio-cpu = <&sai1>;
30		audio-codec = <&sgtl5000>;
31		audio-routing =
32			"LINE_IN", "Line In Jack",
33			"MIC_IN", "Mic Jack",
34			"Mic Jack", "Mic Bias",
35			"Headphone Jack", "HP_OUT";
36	};
37
38	sys_mclk: clock-sys-mclk {
39		compatible = "fixed-clock";
40		#clock-cells = <0>;
41		clock-frequency = <24576000>;
42	};
43};
44
45&i2c2 {
46	clock-frequency = <100000>;
47	pinctrl-names = "default";
48	pinctrl-0 = <&pinctrl_i2c2>;
49	status = "okay";
50
51	sgtl5000: codec@a {
52		reg = <0x0a>;
53		compatible = "fsl,sgtl5000";
54		clocks = <&sys_mclk>;
55		VDDA-supply = <&reg_2p5v>;
56		VDDIO-supply = <&reg_3p3v>;
57	};
58};
59
60&i2c3 {
61	status = "okay";
62
63	polytouch: touchscreen@38 {
64		compatible = "edt,edt-ft5x06";
65		reg = <0x38>;
66		interrupt-parent = <&gpio1>;
67		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
68		reset-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
69		touchscreen-size-x = <800>;
70		touchscreen-size-y = <480>;
71	};
72
73	adc081c: adc@50 {
74		compatible = "ti,adc081c";
75		reg = <0x50>;
76		vref-supply = <&reg_3p3v>;
77	};
78};
79
80&iomuxc {
81	pinctrl-names = "default";
82	pinctrl-0 = <&pinctrl_hog>;
83
84	pinctrl_hog: hoggrp {
85		fsl,pins = <
86			MX6UL_PAD_CSI_VSYNC__GPIO4_IO19		0x10b0
87			MX6UL_PAD_CSI_DATA00__GPIO4_IO21	0x10b0
88			MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x10b0
89			MX6UL_PAD_CSI_DATA02__GPIO4_IO23	0x10b0
90			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x10b0
91			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x10b0
92		>;
93	};
94
95	pinctrl_gpio_leds: gpioledsgrp {
96		fsl,pins = <
97			MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29	0x10b0
98		>;
99	};
100};
101