1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8	model = "Iomega Iconnect";
9	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11	memory {
12		device_type = "memory";
13		reg = <0x00000000 0x10000000>;
14	};
15
16	chosen {
17		bootargs = "console=ttyS0,115200n8 earlyprintk";
18		stdout-path = &uart0;
19		linux,initrd-start = <0x4500040>;
20		linux,initrd-end   = <0x4800000>;
21	};
22
23	ocp@f1000000 {
24		pinctrl: pin-controller@10000 {
25			pmx_button_reset: pmx-button-reset {
26				marvell,pins = "mpp12";
27				marvell,function = "gpio";
28			};
29			pmx_button_otb: pmx-button-otb {
30				marvell,pins = "mpp35";
31				marvell,function = "gpio";
32			};
33			pmx_led_level: pmx-led-level {
34				marvell,pins = "mpp41";
35				marvell,function = "gpio";
36			};
37			pmx_led_power_blue: pmx-led-power-blue {
38				marvell,pins = "mpp42";
39				marvell,function = "gpio";
40			};
41			pmx_led_power_red: pmx-power-red {
42				marvell,pins = "mpp43";
43				marvell,function = "gpio";
44			};
45			pmx_led_usb1: pmx-led-usb1 {
46				marvell,pins = "mpp44";
47				marvell,function = "gpio";
48			};
49			pmx_led_usb2: pmx-led-usb2 {
50				marvell,pins = "mpp45";
51				marvell,function = "gpio";
52			};
53			pmx_led_usb3: pmx-led-usb3 {
54				marvell,pins = "mpp46";
55				marvell,function = "gpio";
56			};
57			pmx_led_usb4: pmx-led-usb4 {
58				marvell,pins = "mpp47";
59				marvell,function = "gpio";
60			};
61			pmx_led_otb: pmx-led-otb {
62				marvell,pins = "mpp48";
63				marvell,function = "gpio";
64			};
65		};
66		i2c@11000 {
67			status = "okay";
68
69			lm63: lm63@4c {
70				compatible = "national,lm63";
71				reg = <0x4c>;
72			};
73		};
74		serial@12000 {
75			status = "okay";
76		};
77	};
78
79	gpio-leds {
80		compatible = "gpio-leds";
81		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
82			      &pmx_led_power_red &pmx_led_usb1
83			      &pmx_led_usb2 &pmx_led_usb3
84			      &pmx_led_usb4 &pmx_led_otb >;
85		pinctrl-names = "default";
86
87		led-level {
88			label = "led_level";
89			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
90			default-state = "on";
91		};
92		power-blue {
93			label = "power:blue";
94			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
95			default-state = "keep";
96		};
97		power-red {
98			label = "power:red";
99			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
100		};
101		usb1 {
102			label = "usb1:blue";
103			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
104		};
105		usb2 {
106			label = "usb2:blue";
107			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
108		};
109		usb3 {
110			label = "usb3:blue";
111			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
112		};
113		usb4 {
114			label = "usb4:blue";
115			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
116		};
117		otb {
118			label = "otb:blue";
119			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
120		};
121	};
122
123	gpio_keys {
124		compatible = "gpio-keys";
125		#address-cells = <1>;
126		#size-cells = <0>;
127		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
128		pinctrl-names = "default";
129
130		otb {
131			label = "OTB Button";
132			linux,code = <KEY_COPY>;
133			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
134			debounce-interval = <100>;
135		};
136		reset {
137			label = "Reset";
138			linux,code = <KEY_RESTART>;
139			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
140			debounce-interval = <100>;
141		};
142	};
143};
144
145&nand {
146	status = "okay";
147
148	partition@0 {
149		label = "uboot";
150		reg = <0x0000000 0xc0000>;
151	};
152
153	partition@a0000 {
154		label = "env";
155		reg = <0xa0000 0x20000>;
156	};
157
158	partition@100000 {
159		label = "zImage";
160		reg = <0x100000 0x300000>;
161	};
162
163	partition@540000 {
164		label = "initrd";
165		reg = <0x540000 0x300000>;
166	};
167
168	partition@980000 {
169		label = "boot";
170		reg = <0x980000 0x1f400000>;
171	};
172};
173
174&mdio {
175	status = "okay";
176
177	ethphy0: ethernet-phy@11 {
178		reg = <11>;
179	};
180};
181
182&eth0 {
183	status = "okay";
184	ethernet0-port@0 {
185		phy-handle = <&ethphy0>;
186	};
187};
188
189&pciec {
190	status = "okay";
191};
192
193&pcie0 {
194	status = "okay";
195};
196