1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/iio/qcom,spmi-vadc.h> 3#include <dt-bindings/interrupt-controller/irq.h> 4#include <dt-bindings/spmi/spmi.h> 5 6&spmi_bus { 7 8 pma8084_0: pma8084@0 { 9 compatible = "qcom,pma8084", "qcom,spmi-pmic"; 10 reg = <0x0 SPMI_USID>; 11 #address-cells = <1>; 12 #size-cells = <0>; 13 14 rtc@6000 { 15 compatible = "qcom,pm8941-rtc"; 16 reg = <0x6000>, 17 <0x6100>; 18 reg-names = "rtc", "alarm"; 19 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; 20 }; 21 22 pwrkey@800 { 23 compatible = "qcom,pm8941-pwrkey"; 24 reg = <0x800>; 25 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 26 debounce = <15625>; 27 bias-pull-up; 28 }; 29 30 pma8084_gpios: gpio@c000 { 31 compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; 32 reg = <0xc000>; 33 gpio-controller; 34 gpio-ranges = <&pma8084_gpios 0 0 22>; 35 #gpio-cells = <2>; 36 interrupt-controller; 37 #interrupt-cells = <2>; 38 }; 39 40 pma8084_mpps: mpps@a000 { 41 compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp"; 42 reg = <0xa000>; 43 gpio-controller; 44 #gpio-cells = <2>; 45 gpio-ranges = <&pma8084_mpps 0 0 8>; 46 interrupt-controller; 47 #interrupt-cells = <2>; 48 }; 49 50 pma8084_temp: temp-alarm@2400 { 51 compatible = "qcom,spmi-temp-alarm"; 52 reg = <0x2400>; 53 interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; 54 #thermal-sensor-cells = <0>; 55 io-channels = <&pma8084_vadc VADC_DIE_TEMP>; 56 io-channel-names = "thermal"; 57 }; 58 59 pma8084_vadc: adc@3100 { 60 compatible = "qcom,spmi-vadc"; 61 reg = <0x3100>; 62 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 63 #address-cells = <1>; 64 #size-cells = <0>; 65 #io-channel-cells = <1>; 66 67 adc-chan@8 { 68 reg = <VADC_DIE_TEMP>; 69 }; 70 71 adc-chan@9 { 72 reg = <VADC_REF_625MV>; 73 }; 74 75 adc-chan@a { 76 reg = <VADC_REF_1250MV>; 77 }; 78 79 adc-chan@c { 80 reg = <VADC_SPARE1>; 81 }; 82 83 adc-chan@e { 84 reg = <VADC_GND_REF>; 85 }; 86 87 adc-chan@f { 88 reg = <VADC_VDD_VADC>; 89 }; 90 }; 91 }; 92 93 pma8084_1: pma8084@1 { 94 compatible = "qcom,pma8084", "qcom,spmi-pmic"; 95 reg = <0x1 SPMI_USID>; 96 #address-cells = <1>; 97 #size-cells = <0>; 98 }; 99}; 100