1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ 4 * 5 * Design Files: https://www.ti.com/lit/zip/SPRR466 6 * TRM: https://www.ti.com/lit/zip/spruj52 7 */ 8 9/dts-v1/; 10 11#include <dt-bindings/net/ti-dp83867.h> 12#include <dt-bindings/gpio/gpio.h> 13#include "k3-j784s4.dtsi" 14 15/ { 16 compatible = "ti,am69-sk", "ti,j784s4"; 17 model = "Texas Instruments AM69 SK"; 18 19 chosen { 20 stdout-path = "serial2:115200n8"; 21 }; 22 23 aliases { 24 serial2 = &main_uart8; 25 mmc1 = &main_sdhci1; 26 i2c0 = &main_i2c0; 27 }; 28 29 memory@80000000 { 30 device_type = "memory"; 31 /* 32G RAM */ 32 reg = <0x00 0x80000000 0x00 0x80000000>, 33 <0x08 0x80000000 0x07 0x80000000>; 34 }; 35 36 reserved_memory: reserved-memory { 37 #address-cells = <2>; 38 #size-cells = <2>; 39 ranges; 40 41 secure_ddr: optee@9e800000 { 42 reg = <0x00 0x9e800000 0x00 0x01800000>; 43 no-map; 44 }; 45 }; 46 47 vusb_main: regulator-vusb-main5v0 { 48 /* USB MAIN INPUT 5V DC */ 49 compatible = "regulator-fixed"; 50 regulator-name = "vusb-main5v0"; 51 regulator-min-microvolt = <5000000>; 52 regulator-max-microvolt = <5000000>; 53 regulator-always-on; 54 regulator-boot-on; 55 }; 56 57 vsys_5v0: regulator-vsys5v0 { 58 /* Output of LM61460 */ 59 compatible = "regulator-fixed"; 60 regulator-name = "vsys_5v0"; 61 regulator-min-microvolt = <5000000>; 62 regulator-max-microvolt = <5000000>; 63 vin-supply = <&vusb_main>; 64 regulator-always-on; 65 regulator-boot-on; 66 }; 67 68 vsys_3v3: regulator-vsys3v3 { 69 /* Output of LM5143 */ 70 compatible = "regulator-fixed"; 71 regulator-name = "vsys_3v3"; 72 regulator-min-microvolt = <3300000>; 73 regulator-max-microvolt = <3300000>; 74 vin-supply = <&vusb_main>; 75 regulator-always-on; 76 regulator-boot-on; 77 }; 78 79 vdd_mmc1: regulator-sd { 80 /* Output of TPS22918 */ 81 compatible = "regulator-fixed"; 82 regulator-name = "vdd_mmc1"; 83 regulator-min-microvolt = <3300000>; 84 regulator-max-microvolt = <3300000>; 85 regulator-boot-on; 86 enable-active-high; 87 vin-supply = <&vsys_3v3>; 88 gpio = <&exp1 2 GPIO_ACTIVE_HIGH>; 89 }; 90 91 vdd_sd_dv: regulator-tlv71033 { 92 /* Output of TLV71033 */ 93 compatible = "regulator-gpio"; 94 regulator-name = "tlv71033"; 95 pinctrl-names = "default"; 96 pinctrl-0 = <&vdd_sd_dv_pins_default>; 97 regulator-min-microvolt = <1800000>; 98 regulator-max-microvolt = <3300000>; 99 regulator-boot-on; 100 vin-supply = <&vsys_5v0>; 101 gpios = <&main_gpio0 49 GPIO_ACTIVE_HIGH>; 102 states = <1800000 0x0>, 103 <3300000 0x1>; 104 }; 105}; 106 107&main_pmx0 { 108 main_uart8_pins_default: main-uart8-pins-default { 109 pinctrl-single,pins = < 110 J784S4_IOPAD(0x0d0, PIN_INPUT, 11) /* (AP38) SPI0_CS1.UART8_RXD */ 111 J784S4_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AN38) SPI0_CLK.UART8_TXD */ 112 >; 113 }; 114 115 main_i2c0_pins_default: main-i2c0-pins-default { 116 pinctrl-single,pins = < 117 J784S4_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AN36) I2C0_SCL */ 118 J784S4_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AP37) I2C0_SDA */ 119 >; 120 }; 121 122 main_mmc1_pins_default: main-mmc1-pins-default { 123 pinctrl-single,pins = < 124 J784S4_IOPAD(0x104, PIN_INPUT, 0) /* (AB38) MMC1_CLK */ 125 J784S4_IOPAD(0x108, PIN_INPUT, 0) /* (AB36) MMC1_CMD */ 126 J784S4_IOPAD(0x100, PIN_INPUT, 0) /* (No Pin) MMC1_CLKLB */ 127 J784S4_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA33) MMC1_DAT0 */ 128 J784S4_IOPAD(0x0f8, PIN_INPUT, 0) /* (AB34) MMC1_DAT1 */ 129 J784S4_IOPAD(0x0f4, PIN_INPUT, 0) /* (AA32) MMC1_DAT2 */ 130 J784S4_IOPAD(0x0f0, PIN_INPUT, 0) /* (AC38) MMC1_DAT3 */ 131 J784S4_IOPAD(0x0e8, PIN_INPUT, 8) /* (AR38) TIMER_IO0.MMC1_SDCD */ 132 >; 133 }; 134 135 vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { 136 pinctrl-single,pins = < 137 J784S4_IOPAD(0x0C4, PIN_INPUT, 7) /* (AD36) ECAP0_IN_APWM_OUT.GPIO0_49 */ 138 >; 139 }; 140}; 141 142&main_uart8 { 143 status = "okay"; 144 pinctrl-names = "default"; 145 pinctrl-0 = <&main_uart8_pins_default>; 146}; 147 148&main_i2c0 { 149 status = "okay"; 150 pinctrl-names = "default"; 151 pinctrl-0 = <&main_i2c0_pins_default>; 152 clock-frequency = <400000>; 153 154 exp1: gpio@21 { 155 compatible = "ti,tca6416"; 156 reg = <0x21>; 157 gpio-controller; 158 #gpio-cells = <2>; 159 gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN", 160 "IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#", 161 "IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz", 162 "PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz", 163 "ENET1_I2CMUX_SEL", "PCIe0_CLKREQ#", "PCIe1_M.2_CLKREQ#", 164 "PCIe3_M2_CLKREQ#", "PCIe0_PRSNT2#_1", "PCIe0_PRSNT2#_2"; 165 }; 166}; 167 168&main_sdhci1 { 169 /* SD card */ 170 status = "okay"; 171 pinctrl-0 = <&main_mmc1_pins_default>; 172 pinctrl-names = "default"; 173 disable-wp; 174 vmmc-supply = <&vdd_mmc1>; 175 vqmmc-supply = <&vdd_sd_dv>; 176}; 177 178&main_gpio0 { 179 status = "okay"; 180}; 181