1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
7  */
8 
9 #include <linux/types.h>
10 #include <linux/pci.h>
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/clk.h>
15 #include <asm/bootinfo.h>
16 
17 #include <bcm63xx_reset.h>
18 
19 #include "pci-bcm63xx.h"
20 
21 /*
22  * Allow PCI to be disabled at runtime depending on board nvram
23  * configuration
24  */
25 int bcm63xx_pci_enabled;
26 
27 static struct resource bcm_pci_mem_resource = {
28 	.name	= "bcm63xx PCI memory space",
29 	.start	= BCM_PCI_MEM_BASE_PA,
30 	.end	= BCM_PCI_MEM_END_PA,
31 	.flags	= IORESOURCE_MEM
32 };
33 
34 static struct resource bcm_pci_io_resource = {
35 	.name	= "bcm63xx PCI IO space",
36 	.start	= BCM_PCI_IO_BASE_PA,
37 #ifdef CONFIG_CARDBUS
38 	.end	= BCM_PCI_IO_HALF_PA,
39 #else
40 	.end	= BCM_PCI_IO_END_PA,
41 #endif
42 	.flags	= IORESOURCE_IO
43 };
44 
45 struct pci_controller bcm63xx_controller = {
46 	.pci_ops	= &bcm63xx_pci_ops,
47 	.io_resource	= &bcm_pci_io_resource,
48 	.mem_resource	= &bcm_pci_mem_resource,
49 };
50 
51 /*
52  * We handle cardbus  via a fake Cardbus bridge,  memory and io spaces
53  * have to be  clearly separated from PCI one  since we have different
54  * memory decoder.
55  */
56 #ifdef CONFIG_CARDBUS
57 static struct resource bcm_cb_mem_resource = {
58 	.name	= "bcm63xx Cardbus memory space",
59 	.start	= BCM_CB_MEM_BASE_PA,
60 	.end	= BCM_CB_MEM_END_PA,
61 	.flags	= IORESOURCE_MEM
62 };
63 
64 static struct resource bcm_cb_io_resource = {
65 	.name	= "bcm63xx Cardbus IO space",
66 	.start	= BCM_PCI_IO_HALF_PA + 1,
67 	.end	= BCM_PCI_IO_END_PA,
68 	.flags	= IORESOURCE_IO
69 };
70 
71 struct pci_controller bcm63xx_cb_controller = {
72 	.pci_ops	= &bcm63xx_cb_ops,
73 	.io_resource	= &bcm_cb_io_resource,
74 	.mem_resource	= &bcm_cb_mem_resource,
75 };
76 #endif
77 
78 static struct resource bcm_pcie_mem_resource = {
79 	.name	= "bcm63xx PCIe memory space",
80 	.start	= BCM_PCIE_MEM_BASE_PA,
81 	.end	= BCM_PCIE_MEM_END_PA,
82 	.flags	= IORESOURCE_MEM,
83 };
84 
85 static struct resource bcm_pcie_io_resource = {
86 	.name	= "bcm63xx PCIe IO space",
87 	.start	= 0,
88 	.end	= 0,
89 	.flags	= 0,
90 };
91 
92 struct pci_controller bcm63xx_pcie_controller = {
93 	.pci_ops	= &bcm63xx_pcie_ops,
94 	.io_resource	= &bcm_pcie_io_resource,
95 	.mem_resource	= &bcm_pcie_mem_resource,
96 };
97 
bcm63xx_int_cfg_readl(u32 reg)98 static u32 bcm63xx_int_cfg_readl(u32 reg)
99 {
100 	u32 tmp;
101 
102 	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
103 	tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
104 	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
105 	iob();
106 	return bcm_mpi_readl(MPI_PCICFGDATA_REG);
107 }
108 
bcm63xx_int_cfg_writel(u32 val,u32 reg)109 static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
110 {
111 	u32 tmp;
112 
113 	tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
114 	tmp |=	MPI_PCICFGCTL_WRITEEN_MASK;
115 	bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
116 	bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
117 }
118 
119 void __iomem *pci_iospace_start;
120 
bcm63xx_reset_pcie(void)121 static void __init bcm63xx_reset_pcie(void)
122 {
123 	u32 val;
124 	u32 reg;
125 
126 	/* enable SERDES */
127 	if (BCMCPU_IS_6328())
128 		reg = MISC_SERDES_CTRL_6328_REG;
129 	else
130 		reg = MISC_SERDES_CTRL_6362_REG;
131 
132 	val = bcm_misc_readl(reg);
133 	val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
134 	bcm_misc_writel(val, reg);
135 
136 	/* reset the PCIe core */
137 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
138 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
139 	mdelay(10);
140 
141 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
142 	mdelay(10);
143 
144 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
145 	mdelay(200);
146 }
147 
148 static struct clk *pcie_clk;
149 
bcm63xx_register_pcie(void)150 static int __init bcm63xx_register_pcie(void)
151 {
152 	u32 val;
153 
154 	/* enable clock */
155 	pcie_clk = clk_get(NULL, "pcie");
156 	if (IS_ERR_OR_NULL(pcie_clk))
157 		return -ENODEV;
158 
159 	clk_prepare_enable(pcie_clk);
160 
161 	bcm63xx_reset_pcie();
162 
163 	/* configure the PCIe bridge */
164 	val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
165 	val |= OPT1_RD_BE_OPT_EN;
166 	val |= OPT1_RD_REPLY_BE_FIX_EN;
167 	val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN;
168 	val |= OPT1_L1_INT_STATUS_MASK_POL;
169 	bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG);
170 
171 	/* setup the interrupts */
172 	val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG);
173 	val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D;
174 	bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG);
175 
176 	val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG);
177 	/* enable credit checking and error checking */
178 	val |= OPT2_TX_CREDIT_CHK_EN;
179 	val |= OPT2_UBUS_UR_DECODE_DIS;
180 
181 	/* set device bus/func for the pcie device */
182 	val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT);
183 	val |= OPT2_CFG_TYPE1_BD_SEL;
184 	bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
185 
186 	/* setup class code as bridge */
187 	val = bcm_pcie_readl(PCIE_IDVAL3_REG);
188 	val &= ~IDVAL3_CLASS_CODE_MASK;
189 	val |= PCI_CLASS_BRIDGE_PCI_NORMAL;
190 	bcm_pcie_writel(val, PCIE_IDVAL3_REG);
191 
192 	/* disable bar1 size */
193 	val = bcm_pcie_readl(PCIE_CONFIG2_REG);
194 	val &= ~CONFIG2_BAR1_SIZE_MASK;
195 	bcm_pcie_writel(val, PCIE_CONFIG2_REG);
196 
197 	/* set bar0 to little endian */
198 	val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
199 	val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
200 	val |= BASEMASK_REMAP_EN;
201 	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
202 
203 	val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
204 	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
205 
206 	register_pci_controller(&bcm63xx_pcie_controller);
207 
208 	return 0;
209 }
210 
bcm63xx_register_pci(void)211 static int __init bcm63xx_register_pci(void)
212 {
213 	unsigned int mem_size;
214 	u32 val;
215 	/*
216 	 * configuration  access are  done through  IO space,  remap 4
217 	 * first bytes to access it from CPU.
218 	 *
219 	 * this means that  no io access from CPU  should happen while
220 	 * we do a configuration cycle,	 but there's no way we can add
221 	 * a spinlock for each io access, so this is currently kind of
222 	 * broken on SMP.
223 	 */
224 	pci_iospace_start = ioremap(BCM_PCI_IO_BASE_PA, 4);
225 	if (!pci_iospace_start)
226 		return -ENOMEM;
227 
228 	/* setup local bus to PCI access (PCI memory) */
229 	val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
230 	bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
231 	bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
232 	bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
233 
234 	/* set Cardbus IDSEL (type 0 cfg access on primary bus for
235 	 * this IDSEL will be done on Cardbus instead) */
236 	val = bcm_pcmcia_readl(PCMCIA_C1_REG);
237 	val &= ~PCMCIA_C1_CBIDSEL_MASK;
238 	val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
239 	bcm_pcmcia_writel(val, PCMCIA_C1_REG);
240 
241 #ifdef CONFIG_CARDBUS
242 	/* setup local bus to PCI access (Cardbus memory) */
243 	val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
244 	bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
245 	bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
246 	val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
247 	bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
248 #else
249 	/* disable second access windows */
250 	bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
251 #endif
252 
253 	/* setup local bus  to PCI access (IO memory),	we have only 1
254 	 * IO window  for both PCI  and cardbus, but it	 cannot handle
255 	 * both	 at the	 same time,  assume standard  PCI for  now, if
256 	 * cardbus card has  IO zone, PCI fixup will  change window to
257 	 * cardbus */
258 	val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
259 	bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
260 	bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
261 	bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
262 
263 	/* enable PCI related GPIO pins */
264 	bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
265 
266 	/* setup PCI to local bus access, used by PCI device to target
267 	 * local RAM while bus mastering */
268 	bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
269 	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368())
270 		val = MPI_SP0_REMAP_ENABLE_MASK;
271 	else
272 		val = 0;
273 	bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
274 
275 	bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
276 	bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
277 
278 	mem_size = bcm63xx_get_memory_size();
279 
280 	/* 6348 before rev b0 exposes only 16 MB of RAM memory through
281 	 * PCI, throw a warning if we have more memory */
282 	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
283 		if (mem_size > (16 * 1024 * 1024))
284 			printk(KERN_WARNING "bcm63xx: this CPU "
285 			       "revision cannot handle more than 16MB "
286 			       "of RAM for PCI bus mastering\n");
287 	} else {
288 		/* setup sp0 range to local RAM size */
289 		bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
290 		bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
291 	}
292 
293 	/* change  host bridge	retry  counter to  infinite number  of
294 	 * retry,  needed for  some broadcom  wifi cards  with Silicon
295 	 * Backplane bus where access to srom seems very slow  */
296 	val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
297 	val &= ~REG_TIMER_RETRY_MASK;
298 	bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
299 
300 	/* enable memory decoder and bus mastering */
301 	val = bcm63xx_int_cfg_readl(PCI_COMMAND);
302 	val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
303 	bcm63xx_int_cfg_writel(val, PCI_COMMAND);
304 
305 	/* enable read prefetching & disable byte swapping for bus
306 	 * mastering transfers */
307 	val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
308 	val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
309 	val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
310 	val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
311 	val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
312 	bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
313 
314 	/* enable pci interrupt */
315 	val = bcm_mpi_readl(MPI_LOCINT_REG);
316 	val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
317 	bcm_mpi_writel(val, MPI_LOCINT_REG);
318 
319 	register_pci_controller(&bcm63xx_controller);
320 
321 #ifdef CONFIG_CARDBUS
322 	register_pci_controller(&bcm63xx_cb_controller);
323 #endif
324 
325 	/* mark memory space used for IO mapping as reserved */
326 	request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
327 			   "bcm63xx PCI IO space");
328 	return 0;
329 }
330 
331 
bcm63xx_pci_init(void)332 static int __init bcm63xx_pci_init(void)
333 {
334 	if (!bcm63xx_pci_enabled)
335 		return -ENODEV;
336 
337 	switch (bcm63xx_get_cpu_id()) {
338 	case BCM6328_CPU_ID:
339 	case BCM6362_CPU_ID:
340 		return bcm63xx_register_pcie();
341 	case BCM3368_CPU_ID:
342 	case BCM6348_CPU_ID:
343 	case BCM6358_CPU_ID:
344 	case BCM6368_CPU_ID:
345 		return bcm63xx_register_pci();
346 	default:
347 		return -ENODEV;
348 	}
349 }
350 
351 arch_initcall(bcm63xx_pci_init);
352