1# SPDX-License-Identifier: GPL-2.0-only
2config CLK_BAIKAL_T1
3	bool "Baikal-T1 Clocks Control Unit interface"
4	depends on (MIPS_BAIKAL_T1 && OF) || COMPILE_TEST
5	default MIPS_BAIKAL_T1
6	help
7	  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
8	  responsible for the chip subsystems clocking and resetting. It
9	  consists of multiple global clock domains, which can be reset by
10	  means of the CCU control registers. These domains and devices placed
11	  in them are fed with clocks generated by a hierarchy of PLLs,
12	  configurable and fixed clock dividers. Enable this option to be able
13	  to select Baikal-T1 CCU PLLs and Dividers drivers.
14
15if CLK_BAIKAL_T1
16
17config CLK_BT1_CCU_PLL
18	bool "Baikal-T1 CCU PLLs support"
19	select MFD_SYSCON
20	default MIPS_BAIKAL_T1
21	help
22	  Enable this to support the PLLs embedded into the Baikal-T1 SoC
23	  System Controller. These are five PLLs placed at the root of the
24	  clocks hierarchy, right after an external reference oscillator
25	  (normally of 25MHz). They are used to generate high frequency
26	  signals, which are either directly wired to the consumers (like
27	  CPUs, DDR, etc.) or passed over the clock dividers to be only
28	  then used as an individual reference clock of a target device.
29
30config CLK_BT1_CCU_DIV
31	bool "Baikal-T1 CCU Dividers support"
32	select MFD_SYSCON
33	default MIPS_BAIKAL_T1
34	help
35	  Enable this to support the CCU dividers used to distribute clocks
36	  between AXI-bus and system devices coming from CCU PLLs of Baikal-T1
37	  SoC. CCU dividers can be either configurable or with fixed divider,
38	  either gateable or ungateable. Some of the CCU dividers can be as well
39	  used to reset the domains they're supplying clock to.
40
41config CLK_BT1_CCU_RST
42	bool "Baikal-T1 CCU Resets support"
43	select RESET_CONTROLLER
44	select MFD_SYSCON
45	default MIPS_BAIKAL_T1
46	help
47	  Enable this to support the CCU reset blocks responsible for the
48	  AXI-bus and some subsystems reset. These are mainly the
49	  self-deasserted reset controls but there are several lines which
50	  can be directly asserted/de-asserted (PCIe and DDR sub-domains).
51
52endif
53