clk/ti/autoidle.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * TI clock autoidle support
 *
 * Copyright (C) 2013 Texas Instruments, Inc.
 *
 * Tero Kristo <t-kristo@ti.com>
 */

#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/ti.h>

#include "clock.h"

struct clk_ti_autoidle {
	struct clk_omap_reg	reg;
	u8			shift;
	u8			flags;
	const char		*name;
	struct list_head	node;
};

#define AUTOIDLE_LOW		0x1

static LIST_HEAD(autoidle_clks);

/*
 * we have some non-atomic read/write
 * operations behind it, so lets
 * take one lock for handling autoidle
 * of all clocks
 */
static DEFINE_SPINLOCK(autoidle_spinlock);

static int _omap2_clk_deny_idle(struct clk_hw_omap *clk)
{
	if (clk->ops && clk->ops->deny_idle) {
		unsigned long irqflags;

		spin_lock_irqsave(&autoidle_spinlock, irqflags);
		clk->autoidle_count++;
		if (clk->autoidle_count == 1)
			clk->ops->deny_idle(clk);

		spin_unlock_irqrestore(&autoidle_spinlock, irqflags);
	}
	return 0;
}

static int _omap2_clk_allow_idle(struct clk_hw_omap *clk)
{
	if (clk->ops && clk->ops->allow_idle) {
		unsigned long irqflags;

		spin_lock_irqsave(&autoidle_spinlock, irqflags);
		clk->autoidle_count--;
		if (clk->autoidle_count == 0)
			clk->ops->allow_idle(clk);

		spin_unlock_irqrestore(&autoidle_spinlock, irqflags);
	}
	return 0;
}

/**
 * omap2_clk_deny_idle - disable autoidle on an OMAP clock
 * @clk: struct clk * to disable autoidle for
 *
 * Disable autoidle on an OMAP clock.
 */
int omap2_clk_deny_idle(struct clk *clk)
{
	struct clk_hw *hw;

	if (!clk)
		return -EINVAL;

	hw = __clk_get_hw(clk);

	if (omap2_clk_is_hw_omap(hw)) {
		struct clk_hw_omap *c = to_clk_hw_omap(hw);

		return _omap2_clk_deny_idle(c);
	}

	return -EINVAL;
}

/**
 * omap2_clk_allow_idle - enable autoidle on an OMAP clock
 * @clk: struct clk * to enable autoidle for
 *
 * Enable autoidle on an OMAP clock.
 */
int omap2_clk_allow_idle(struct clk *clk)
{
	struct clk_hw *hw;

	if (!clk)
		return -EINVAL;

	hw = __clk_get_hw(clk);

	if (omap2_clk_is_hw_omap(hw)) {
		struct clk_hw_omap *c = to_clk_hw_omap(hw);

		return _omap2_clk_allow_idle(c);
	}

	return -EINVAL;
}

static void _allow_autoidle(struct clk_ti_autoidle *clk)
{
	u32 val;

	val = ti_clk_ll_ops->clk_readl(&clk->reg);

	if (clk->flags & AUTOIDLE_LOW)
		val &= ~(1 << clk->shift);
	else
		val |= (1 << clk->shift);

	ti_clk_ll_ops->clk_writel(val, &clk->reg);
}

static void _deny_autoidle(struct clk_ti_autoidle *clk)
{
	u32 val;

	val = ti_clk_ll_ops->clk_readl(&clk->reg);

	if (clk->flags & AUTOIDLE_LOW)
		val |= (1 << clk->shift);
	else
		val &= ~(1 << clk->shift);

	ti_clk_ll_ops->clk_writel(val, &clk->reg);
}

/**
 * _clk_generic_allow_autoidle_all - enable autoidle for all clocks
 *
 * Enables hardware autoidle for all registered DT clocks, which have
 * the feature.
 */
static void _clk_generic_allow_autoidle_all(void)
{
	struct clk_ti_autoidle *c;

	list_for_each_entry(c, &autoidle_clks, node)
		_allow_autoidle(c);
}

/**
 * _clk_generic_deny_autoidle_all - disable autoidle for all clocks
 *
 * Disables hardware autoidle for all registered DT clocks, which have
 * the feature.
 */
static void _clk_generic_deny_autoidle_all(void)
{
	struct clk_ti_autoidle *c;

	list_for_each_entry(c, &autoidle_clks, node)
		_deny_autoidle(c);
}

/**
 * of_ti_clk_autoidle_setup - sets up hardware autoidle for a clock
 * @node: pointer to the clock device node
 *
 * Checks if a clock has hardware autoidle support or not (check
 * for presence of 'ti,autoidle-shift' property in the device tree
 * node) and sets up the hardware autoidle feature for the clock
 * if available. If autoidle is available, the clock is also added
 * to the autoidle list for later processing. Returns 0 on success,
 * negative error value on failure.
 */
int __init of_ti_clk_autoidle_setup(struct device_node *node)
{
	u32 shift;
	struct clk_ti_autoidle *clk;
	int ret;

	/* Check if this clock has autoidle support or not */
	if (of_property_read_u32(node, "ti,autoidle-shift", &shift))
		return 0;

	clk = kzalloc(sizeof(*clk), GFP_KERNEL);

	if (!clk)
		return -ENOMEM;

	clk->shift = shift;
	clk->name = ti_dt_clk_name(node);
	ret = ti_clk_get_reg_addr(node, 0, &clk->reg);
	if (ret) {
		kfree(clk);
		return ret;
	}

	if (of_property_read_bool(node, "ti,invert-autoidle-bit"))
		clk->flags |= AUTOIDLE_LOW;

	list_add(&clk->node, &autoidle_clks);

	return 0;
}

/**
 * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
 * support it
 *
 * Enable clock autoidle on all OMAP clocks that have allow_idle
 * function pointers associated with them.  This function is intended
 * to be temporary until support for this is added to the common clock
 * code.  Returns 0.
 */
int omap2_clk_enable_autoidle_all(void)
{
	int ret;

	ret = omap2_clk_for_each(_omap2_clk_allow_idle);
	if (ret)
		return ret;

	_clk_generic_allow_autoidle_all();

	return 0;
}

/**
 * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that
 * support it
 *
 * Disable clock autoidle on all OMAP clocks that have allow_idle
 * function pointers associated with them.  This function is intended
 * to be temporary until support for this is added to the common clock
 * code.  Returns 0.
 */
int omap2_clk_disable_autoidle_all(void)
{
	int ret;

	ret = omap2_clk_for_each(_omap2_clk_deny_idle);
	if (ret)
		return ret;

	_clk_generic_deny_autoidle_all();

	return 0;
}