1 /*
2 * Copyright 2020 Advanced Micro Devices, Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
21 *
22 * Authors: AMD
23 *
24 */
25
26 #include "reg_helper.h"
27
28 #include "core_types.h"
29 #include "link_encoder.h"
30 #include "dcn301_dio_link_encoder.h"
31 #include "stream_encoder.h"
32 #include "dc_bios_types.h"
33 #include "gpio_service_interface.h"
34
35 #define CTX \
36 enc10->base.ctx
37 #define DC_LOGGER \
38 enc10->base.ctx->logger
39
40 #define REG(reg)\
41 (enc10->link_regs->reg)
42
43 #undef FN
44 #define FN(reg_name, field_name) \
45 enc10->link_shift->field_name, enc10->link_mask->field_name
46
47 #define IND_REG(index) \
48 (enc10->link_regs->index)
49
50 static const struct link_encoder_funcs dcn301_link_enc_funcs = {
51 .read_state = link_enc2_read_state,
52 .validate_output_with_stream = dcn10_link_encoder_validate_output_with_stream,
53 .hw_init = enc3_hw_init,
54 .setup = dcn10_link_encoder_setup,
55 .enable_tmds_output = dcn10_link_encoder_enable_tmds_output,
56 .enable_dp_output = dcn20_link_encoder_enable_dp_output,
57 .enable_dp_mst_output = dcn10_link_encoder_enable_dp_mst_output,
58 .disable_output = dcn10_link_encoder_disable_output,
59 .dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings,
60 .dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern,
61 .update_mst_stream_allocation_table = dcn10_link_encoder_update_mst_stream_allocation_table,
62 .psr_program_dp_dphy_fast_training = dcn10_psr_program_dp_dphy_fast_training,
63 .psr_program_secondary_packet = dcn10_psr_program_secondary_packet,
64 .connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe,
65 .enable_hpd = dcn10_link_encoder_enable_hpd,
66 .disable_hpd = dcn10_link_encoder_disable_hpd,
67 .is_dig_enabled = dcn10_is_dig_enabled,
68 .destroy = dcn10_link_encoder_destroy,
69 .fec_set_enable = enc2_fec_set_enable,
70 .fec_set_ready = enc2_fec_set_ready,
71 .fec_is_active = enc2_fec_is_active,
72 .get_dig_frontend = dcn10_get_dig_frontend,
73 .get_dig_mode = dcn10_get_dig_mode,
74 .is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode,
75 .get_max_link_cap = dcn20_link_encoder_get_max_link_cap,
76 };
77
dcn301_link_encoder_construct(struct dcn20_link_encoder * enc20,const struct encoder_init_data * init_data,const struct encoder_feature_support * enc_features,const struct dcn10_link_enc_registers * link_regs,const struct dcn10_link_enc_aux_registers * aux_regs,const struct dcn10_link_enc_hpd_registers * hpd_regs,const struct dcn10_link_enc_shift * link_shift,const struct dcn10_link_enc_mask * link_mask)78 void dcn301_link_encoder_construct(
79 struct dcn20_link_encoder *enc20,
80 const struct encoder_init_data *init_data,
81 const struct encoder_feature_support *enc_features,
82 const struct dcn10_link_enc_registers *link_regs,
83 const struct dcn10_link_enc_aux_registers *aux_regs,
84 const struct dcn10_link_enc_hpd_registers *hpd_regs,
85 const struct dcn10_link_enc_shift *link_shift,
86 const struct dcn10_link_enc_mask *link_mask)
87 {
88 struct bp_encoder_cap_info bp_cap_info = {0};
89 const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
90 enum bp_result result = BP_RESULT_OK;
91 struct dcn10_link_encoder *enc10 = &enc20->enc10;
92
93 enc10->base.funcs = &dcn301_link_enc_funcs;
94 enc10->base.ctx = init_data->ctx;
95 enc10->base.id = init_data->encoder;
96
97 enc10->base.hpd_source = init_data->hpd_source;
98 enc10->base.connector = init_data->connector;
99
100 enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
101
102 enc10->base.features = *enc_features;
103
104 enc10->base.transmitter = init_data->transmitter;
105
106 /* set the flag to indicate whether driver poll the I2C data pin
107 * while doing the DP sink detect
108 */
109
110 /* if (dal_adapter_service_is_feature_supported(as,
111 FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
112 enc10->base.features.flags.bits.
113 DP_SINK_DETECT_POLL_DATA_PIN = true;*/
114
115 enc10->base.output_signals =
116 SIGNAL_TYPE_DVI_SINGLE_LINK |
117 SIGNAL_TYPE_DVI_DUAL_LINK |
118 SIGNAL_TYPE_LVDS |
119 SIGNAL_TYPE_DISPLAY_PORT |
120 SIGNAL_TYPE_DISPLAY_PORT_MST |
121 SIGNAL_TYPE_EDP |
122 SIGNAL_TYPE_HDMI_TYPE_A;
123
124 /* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
125 * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
126 * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
127 * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
128 * Prefer DIG assignment is decided by board design.
129 * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
130 * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
131 * By this, adding DIGG should not hurt DCE 8.0.
132 * This will let DCE 8.1 share DCE 8.0 as much as possible
133 */
134
135 enc10->link_regs = link_regs;
136 enc10->aux_regs = aux_regs;
137 enc10->hpd_regs = hpd_regs;
138 enc10->link_shift = link_shift;
139 enc10->link_mask = link_mask;
140
141 switch (enc10->base.transmitter) {
142 case TRANSMITTER_UNIPHY_A:
143 enc10->base.preferred_engine = ENGINE_ID_DIGA;
144 break;
145 case TRANSMITTER_UNIPHY_B:
146 enc10->base.preferred_engine = ENGINE_ID_DIGB;
147 break;
148 case TRANSMITTER_UNIPHY_C:
149 enc10->base.preferred_engine = ENGINE_ID_DIGC;
150 break;
151 case TRANSMITTER_UNIPHY_D:
152 enc10->base.preferred_engine = ENGINE_ID_DIGD;
153 break;
154 case TRANSMITTER_UNIPHY_E:
155 enc10->base.preferred_engine = ENGINE_ID_DIGE;
156 break;
157 case TRANSMITTER_UNIPHY_F:
158 enc10->base.preferred_engine = ENGINE_ID_DIGF;
159 break;
160 case TRANSMITTER_UNIPHY_G:
161 enc10->base.preferred_engine = ENGINE_ID_DIGG;
162 break;
163 default:
164 ASSERT_CRITICAL(false);
165 enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
166 }
167
168 /* default to one to mirror Windows behavior */
169 enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
170
171 result = bp_funcs->get_encoder_cap_info(enc10->base.ctx->dc_bios,
172 enc10->base.id, &bp_cap_info);
173
174 /* Override features with DCE-specific values */
175 if (result == BP_RESULT_OK) {
176 enc10->base.features.flags.bits.IS_HBR2_CAPABLE =
177 bp_cap_info.DP_HBR2_EN;
178 enc10->base.features.flags.bits.IS_HBR3_CAPABLE =
179 bp_cap_info.DP_HBR3_EN;
180 enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
181 enc10->base.features.flags.bits.DP_IS_USB_C =
182 bp_cap_info.DP_IS_USB_C;
183 } else {
184 DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
185 __func__,
186 result);
187 }
188 if (enc10->base.ctx->dc->debug.hdmi20_disable) {
189 enc10->base.features.flags.bits.HDMI_6GB_EN = 0;
190 }
191 }
192