1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright 2021 Google Inc.
4 *
5 * Panel driver for the Samsung ATNA33XC20 panel. This panel can't be handled
6 * by the DRM_PANEL_SIMPLE driver because its power sequencing is non-standard.
7 */
8
9 #include <linux/backlight.h>
10 #include <linux/delay.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/iopoll.h>
13 #include <linux/module.h>
14 #include <linux/pm_runtime.h>
15 #include <linux/regulator/consumer.h>
16
17 #include <drm/display/drm_dp_aux_bus.h>
18 #include <drm/display/drm_dp_helper.h>
19 #include <drm/drm_edid.h>
20 #include <drm/drm_panel.h>
21
22 /* T3 VCC to HPD high is max 200 ms */
23 #define HPD_MAX_MS 200
24 #define HPD_MAX_US (HPD_MAX_MS * 1000)
25
26 struct atana33xc20_panel {
27 struct drm_panel base;
28 bool prepared;
29 bool enabled;
30 bool el3_was_on;
31
32 bool no_hpd;
33 struct gpio_desc *hpd_gpio;
34
35 struct regulator *supply;
36 struct gpio_desc *el_on3_gpio;
37 struct drm_dp_aux *aux;
38
39 struct edid *edid;
40
41 ktime_t powered_off_time;
42 ktime_t powered_on_time;
43 ktime_t el_on3_off_time;
44 };
45
to_atana33xc20(struct drm_panel * panel)46 static inline struct atana33xc20_panel *to_atana33xc20(struct drm_panel *panel)
47 {
48 return container_of(panel, struct atana33xc20_panel, base);
49 }
50
atana33xc20_wait(ktime_t start_ktime,unsigned int min_ms)51 static void atana33xc20_wait(ktime_t start_ktime, unsigned int min_ms)
52 {
53 ktime_t now_ktime, min_ktime;
54
55 min_ktime = ktime_add(start_ktime, ms_to_ktime(min_ms));
56 now_ktime = ktime_get_boottime();
57
58 if (ktime_before(now_ktime, min_ktime))
59 msleep(ktime_to_ms(ktime_sub(min_ktime, now_ktime)) + 1);
60 }
61
atana33xc20_suspend(struct device * dev)62 static int atana33xc20_suspend(struct device *dev)
63 {
64 struct atana33xc20_panel *p = dev_get_drvdata(dev);
65 int ret;
66
67 /*
68 * Note 3 (Example of power off sequence in detail) in spec
69 * specifies to wait 150 ms after deasserting EL3_ON before
70 * powering off.
71 */
72 if (p->el3_was_on)
73 atana33xc20_wait(p->el_on3_off_time, 150);
74
75 ret = regulator_disable(p->supply);
76 if (ret)
77 return ret;
78 p->powered_off_time = ktime_get_boottime();
79 p->el3_was_on = false;
80
81 return 0;
82 }
83
atana33xc20_resume(struct device * dev)84 static int atana33xc20_resume(struct device *dev)
85 {
86 struct atana33xc20_panel *p = dev_get_drvdata(dev);
87 int hpd_asserted;
88 int ret;
89
90 /* T12 (Power off time) is min 500 ms */
91 atana33xc20_wait(p->powered_off_time, 500);
92
93 ret = regulator_enable(p->supply);
94 if (ret)
95 return ret;
96 p->powered_on_time = ktime_get_boottime();
97
98 if (p->no_hpd) {
99 msleep(HPD_MAX_MS);
100 return 0;
101 }
102
103 if (p->hpd_gpio) {
104 ret = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
105 hpd_asserted, hpd_asserted,
106 1000, HPD_MAX_US);
107 if (hpd_asserted < 0)
108 ret = hpd_asserted;
109
110 if (ret)
111 dev_warn(dev, "Error waiting for HPD GPIO: %d\n", ret);
112
113 return ret;
114 }
115
116 if (p->aux->wait_hpd_asserted) {
117 ret = p->aux->wait_hpd_asserted(p->aux, HPD_MAX_US);
118
119 if (ret)
120 dev_warn(dev, "Controller error waiting for HPD: %d\n", ret);
121
122 return ret;
123 }
124
125 /*
126 * Note that it's possible that no_hpd is false, hpd_gpio is
127 * NULL, and wait_hpd_asserted is NULL. This is because
128 * wait_hpd_asserted() is optional even if HPD is hooked up to
129 * a dedicated pin on the eDP controller. In this case we just
130 * assume that the controller driver will wait for HPD at the
131 * right times.
132 */
133 return 0;
134 }
135
atana33xc20_disable(struct drm_panel * panel)136 static int atana33xc20_disable(struct drm_panel *panel)
137 {
138 struct atana33xc20_panel *p = to_atana33xc20(panel);
139
140 /* Disabling when already disabled is a no-op */
141 if (!p->enabled)
142 return 0;
143
144 gpiod_set_value_cansleep(p->el_on3_gpio, 0);
145 p->el_on3_off_time = ktime_get_boottime();
146 p->enabled = false;
147
148 /*
149 * Keep track of the fact that EL_ON3 was on but we haven't power
150 * cycled yet. This lets us know that "el_on3_off_time" is recent (we
151 * don't need to worry about ktime wraparounds) and also makes it
152 * obvious if we try to enable again without a power cycle (see the
153 * warning in atana33xc20_enable()).
154 */
155 p->el3_was_on = true;
156
157 /*
158 * Sleeping 20 ms here (after setting the GPIO) avoids a glitch when
159 * powering off.
160 */
161 msleep(20);
162
163 return 0;
164 }
165
atana33xc20_enable(struct drm_panel * panel)166 static int atana33xc20_enable(struct drm_panel *panel)
167 {
168 struct atana33xc20_panel *p = to_atana33xc20(panel);
169
170 /* Enabling when already enabled is a no-op */
171 if (p->enabled)
172 return 0;
173
174 /*
175 * Once EL_ON3 drops we absolutely need a power cycle before the next
176 * enable or the backlight will never come on again. The code ensures
177 * this because disable() is _always_ followed by unprepare() and
178 * unprepare() forces a suspend with pm_runtime_put_sync_suspend(),
179 * but let's track just to make sure since the requirement is so
180 * non-obvious.
181 */
182 if (WARN_ON(p->el3_was_on))
183 return -EIO;
184
185 /*
186 * Note 2 (Example of power on sequence in detail) in spec specifies
187 * to wait 400 ms after powering on before asserting EL3_on.
188 */
189 atana33xc20_wait(p->powered_on_time, 400);
190
191 gpiod_set_value_cansleep(p->el_on3_gpio, 1);
192 p->enabled = true;
193
194 return 0;
195 }
196
atana33xc20_unprepare(struct drm_panel * panel)197 static int atana33xc20_unprepare(struct drm_panel *panel)
198 {
199 struct atana33xc20_panel *p = to_atana33xc20(panel);
200 int ret;
201
202 /* Unpreparing when already unprepared is a no-op */
203 if (!p->prepared)
204 return 0;
205
206 /*
207 * Purposely do a put_sync, don't use autosuspend. The panel's tcon
208 * seems to sometimes crash when you stop giving it data and this is
209 * the best way to ensure it will come back.
210 *
211 * NOTE: we still want autosuspend for cases where we only turn on
212 * to get the EDID or otherwise send DP AUX commands to the panel.
213 */
214 ret = pm_runtime_put_sync_suspend(panel->dev);
215 if (ret < 0)
216 return ret;
217 p->prepared = false;
218
219 return 0;
220 }
221
atana33xc20_prepare(struct drm_panel * panel)222 static int atana33xc20_prepare(struct drm_panel *panel)
223 {
224 struct atana33xc20_panel *p = to_atana33xc20(panel);
225 int ret;
226
227 /* Preparing when already prepared is a no-op */
228 if (p->prepared)
229 return 0;
230
231 ret = pm_runtime_get_sync(panel->dev);
232 if (ret < 0) {
233 pm_runtime_put_autosuspend(panel->dev);
234 return ret;
235 }
236 p->prepared = true;
237
238 return 0;
239 }
240
atana33xc20_get_modes(struct drm_panel * panel,struct drm_connector * connector)241 static int atana33xc20_get_modes(struct drm_panel *panel,
242 struct drm_connector *connector)
243 {
244 struct atana33xc20_panel *p = to_atana33xc20(panel);
245 struct dp_aux_ep_device *aux_ep = to_dp_aux_ep_dev(panel->dev);
246 int num = 0;
247
248 pm_runtime_get_sync(panel->dev);
249
250 if (!p->edid)
251 p->edid = drm_get_edid(connector, &aux_ep->aux->ddc);
252 num = drm_add_edid_modes(connector, p->edid);
253
254 pm_runtime_mark_last_busy(panel->dev);
255 pm_runtime_put_autosuspend(panel->dev);
256
257 return num;
258 }
259
260 static const struct drm_panel_funcs atana33xc20_funcs = {
261 .disable = atana33xc20_disable,
262 .enable = atana33xc20_enable,
263 .unprepare = atana33xc20_unprepare,
264 .prepare = atana33xc20_prepare,
265 .get_modes = atana33xc20_get_modes,
266 };
267
atana33xc20_runtime_disable(void * data)268 static void atana33xc20_runtime_disable(void *data)
269 {
270 pm_runtime_disable(data);
271 }
272
atana33xc20_dont_use_autosuspend(void * data)273 static void atana33xc20_dont_use_autosuspend(void *data)
274 {
275 pm_runtime_dont_use_autosuspend(data);
276 }
277
atana33xc20_probe(struct dp_aux_ep_device * aux_ep)278 static int atana33xc20_probe(struct dp_aux_ep_device *aux_ep)
279 {
280 struct atana33xc20_panel *panel;
281 struct device *dev = &aux_ep->dev;
282 int ret;
283
284 panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
285 if (!panel)
286 return -ENOMEM;
287 dev_set_drvdata(dev, panel);
288
289 panel->aux = aux_ep->aux;
290
291 panel->supply = devm_regulator_get(dev, "power");
292 if (IS_ERR(panel->supply))
293 return dev_err_probe(dev, PTR_ERR(panel->supply),
294 "Failed to get power supply\n");
295
296 panel->el_on3_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
297 if (IS_ERR(panel->el_on3_gpio))
298 return dev_err_probe(dev, PTR_ERR(panel->el_on3_gpio),
299 "Failed to get enable GPIO\n");
300
301 panel->no_hpd = of_property_read_bool(dev->of_node, "no-hpd");
302 if (!panel->no_hpd) {
303 panel->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
304 if (IS_ERR(panel->hpd_gpio))
305 return dev_err_probe(dev, PTR_ERR(panel->hpd_gpio),
306 "Failed to get HPD GPIO\n");
307 }
308
309 pm_runtime_enable(dev);
310 ret = devm_add_action_or_reset(dev, atana33xc20_runtime_disable, dev);
311 if (ret)
312 return ret;
313 pm_runtime_set_autosuspend_delay(dev, 2000);
314 pm_runtime_use_autosuspend(dev);
315 ret = devm_add_action_or_reset(dev, atana33xc20_dont_use_autosuspend, dev);
316 if (ret)
317 return ret;
318
319 drm_panel_init(&panel->base, dev, &atana33xc20_funcs, DRM_MODE_CONNECTOR_eDP);
320
321 pm_runtime_get_sync(dev);
322 ret = drm_panel_dp_aux_backlight(&panel->base, aux_ep->aux);
323 pm_runtime_mark_last_busy(dev);
324 pm_runtime_put_autosuspend(dev);
325 if (ret)
326 return dev_err_probe(dev, ret,
327 "failed to register dp aux backlight\n");
328
329 drm_panel_add(&panel->base);
330
331 return 0;
332 }
333
atana33xc20_remove(struct dp_aux_ep_device * aux_ep)334 static void atana33xc20_remove(struct dp_aux_ep_device *aux_ep)
335 {
336 struct device *dev = &aux_ep->dev;
337 struct atana33xc20_panel *panel = dev_get_drvdata(dev);
338
339 drm_panel_remove(&panel->base);
340 drm_panel_disable(&panel->base);
341 drm_panel_unprepare(&panel->base);
342
343 kfree(panel->edid);
344 }
345
atana33xc20_shutdown(struct dp_aux_ep_device * aux_ep)346 static void atana33xc20_shutdown(struct dp_aux_ep_device *aux_ep)
347 {
348 struct device *dev = &aux_ep->dev;
349 struct atana33xc20_panel *panel = dev_get_drvdata(dev);
350
351 drm_panel_disable(&panel->base);
352 drm_panel_unprepare(&panel->base);
353 }
354
355 static const struct of_device_id atana33xc20_dt_match[] = {
356 { .compatible = "samsung,atna33xc20", },
357 { /* sentinal */ }
358 };
359 MODULE_DEVICE_TABLE(of, atana33xc20_dt_match);
360
361 static const struct dev_pm_ops atana33xc20_pm_ops = {
362 SET_RUNTIME_PM_OPS(atana33xc20_suspend, atana33xc20_resume, NULL)
363 SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
364 pm_runtime_force_resume)
365 };
366
367 static struct dp_aux_ep_driver atana33xc20_driver = {
368 .driver = {
369 .name = "samsung_atana33xc20",
370 .of_match_table = atana33xc20_dt_match,
371 .pm = &atana33xc20_pm_ops,
372 },
373 .probe = atana33xc20_probe,
374 .remove = atana33xc20_remove,
375 .shutdown = atana33xc20_shutdown,
376 };
377
atana33xc20_init(void)378 static int __init atana33xc20_init(void)
379 {
380 return dp_aux_dp_driver_register(&atana33xc20_driver);
381 }
382 module_init(atana33xc20_init);
383
atana33xc20_exit(void)384 static void __exit atana33xc20_exit(void)
385 {
386 dp_aux_dp_driver_unregister(&atana33xc20_driver);
387 }
388 module_exit(atana33xc20_exit);
389
390 MODULE_DESCRIPTION("Samsung ATANA33XC20 Panel Driver");
391 MODULE_LICENSE("GPL v2");
392