1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Driver for Zarlink ZL10039 DVB-S tuner
4  *
5  *  Copyright 2007 Jan D. Louw <jd.louw@mweb.co.za>
6  */
7 
8 #include <linux/module.h>
9 #include <linux/init.h>
10 #include <linux/string.h>
11 #include <linux/slab.h>
12 #include <linux/dvb/frontend.h>
13 
14 #include <media/dvb_frontend.h>
15 #include "zl10039.h"
16 
17 static int debug;
18 
19 /* Max transfer size done by I2C transfer functions */
20 #define MAX_XFER_SIZE  64
21 
22 #define dprintk(args...) \
23 	do { \
24 		if (debug) \
25 			printk(KERN_DEBUG args); \
26 	} while (0)
27 
28 enum zl10039_model_id {
29 	ID_ZL10039 = 1
30 };
31 
32 struct zl10039_state {
33 	struct i2c_adapter *i2c;
34 	u8 i2c_addr;
35 	u8 id;
36 };
37 
38 enum zl10039_reg_addr {
39 	PLL0 = 0,
40 	PLL1,
41 	PLL2,
42 	PLL3,
43 	RFFE,
44 	BASE0,
45 	BASE1,
46 	BASE2,
47 	LO0,
48 	LO1,
49 	LO2,
50 	LO3,
51 	LO4,
52 	LO5,
53 	LO6,
54 	GENERAL
55 };
56 
zl10039_read(const struct zl10039_state * state,const enum zl10039_reg_addr reg,u8 * buf,const size_t count)57 static int zl10039_read(const struct zl10039_state *state,
58 			const enum zl10039_reg_addr reg, u8 *buf,
59 			const size_t count)
60 {
61 	u8 regbuf[] = { reg };
62 	struct i2c_msg msg[] = {
63 		{/* Write register address */
64 			.addr = state->i2c_addr,
65 			.flags = 0,
66 			.buf = regbuf,
67 			.len = 1,
68 		}, {/* Read count bytes */
69 			.addr = state->i2c_addr,
70 			.flags = I2C_M_RD,
71 			.buf = buf,
72 			.len = count,
73 		},
74 	};
75 
76 	dprintk("%s\n", __func__);
77 
78 	if (i2c_transfer(state->i2c, msg, 2) != 2) {
79 		dprintk("%s: i2c read error\n", __func__);
80 		return -EREMOTEIO;
81 	}
82 
83 	return 0; /* Success */
84 }
85 
zl10039_write(struct zl10039_state * state,const enum zl10039_reg_addr reg,const u8 * src,const size_t count)86 static int zl10039_write(struct zl10039_state *state,
87 			const enum zl10039_reg_addr reg, const u8 *src,
88 			const size_t count)
89 {
90 	u8 buf[MAX_XFER_SIZE];
91 	struct i2c_msg msg = {
92 		.addr = state->i2c_addr,
93 		.flags = 0,
94 		.buf = buf,
95 		.len = count + 1,
96 	};
97 
98 	if (1 + count > sizeof(buf)) {
99 		printk(KERN_WARNING
100 		       "%s: i2c wr reg=%04x: len=%zu is too big!\n",
101 		       KBUILD_MODNAME, reg, count);
102 		return -EINVAL;
103 	}
104 
105 	dprintk("%s\n", __func__);
106 	/* Write register address and data in one go */
107 	buf[0] = reg;
108 	memcpy(&buf[1], src, count);
109 	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
110 		dprintk("%s: i2c write error\n", __func__);
111 		return -EREMOTEIO;
112 	}
113 
114 	return 0; /* Success */
115 }
116 
zl10039_readreg(struct zl10039_state * state,const enum zl10039_reg_addr reg,u8 * val)117 static inline int zl10039_readreg(struct zl10039_state *state,
118 				const enum zl10039_reg_addr reg, u8 *val)
119 {
120 	return zl10039_read(state, reg, val, 1);
121 }
122 
zl10039_writereg(struct zl10039_state * state,const enum zl10039_reg_addr reg,const u8 val)123 static inline int zl10039_writereg(struct zl10039_state *state,
124 				const enum zl10039_reg_addr reg,
125 				const u8 val)
126 {
127 	const u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
128 
129 	return zl10039_write(state, reg, &tmp, 1);
130 }
131 
zl10039_init(struct dvb_frontend * fe)132 static int zl10039_init(struct dvb_frontend *fe)
133 {
134 	struct zl10039_state *state = fe->tuner_priv;
135 	int ret;
136 
137 	dprintk("%s\n", __func__);
138 	if (fe->ops.i2c_gate_ctrl)
139 		fe->ops.i2c_gate_ctrl(fe, 1);
140 	/* Reset logic */
141 	ret = zl10039_writereg(state, GENERAL, 0x40);
142 	if (ret < 0) {
143 		dprintk("Note: i2c write error normal when resetting the tuner\n");
144 	}
145 	/* Wake up */
146 	ret = zl10039_writereg(state, GENERAL, 0x01);
147 	if (ret < 0) {
148 		dprintk("Tuner power up failed\n");
149 		return ret;
150 	}
151 	if (fe->ops.i2c_gate_ctrl)
152 		fe->ops.i2c_gate_ctrl(fe, 0);
153 
154 	return 0;
155 }
156 
zl10039_sleep(struct dvb_frontend * fe)157 static int zl10039_sleep(struct dvb_frontend *fe)
158 {
159 	struct zl10039_state *state = fe->tuner_priv;
160 	int ret;
161 
162 	dprintk("%s\n", __func__);
163 	if (fe->ops.i2c_gate_ctrl)
164 		fe->ops.i2c_gate_ctrl(fe, 1);
165 	ret = zl10039_writereg(state, GENERAL, 0x80);
166 	if (ret < 0) {
167 		dprintk("Tuner sleep failed\n");
168 		return ret;
169 	}
170 	if (fe->ops.i2c_gate_ctrl)
171 		fe->ops.i2c_gate_ctrl(fe, 0);
172 
173 	return 0;
174 }
175 
zl10039_set_params(struct dvb_frontend * fe)176 static int zl10039_set_params(struct dvb_frontend *fe)
177 {
178 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
179 	struct zl10039_state *state = fe->tuner_priv;
180 	u8 buf[6];
181 	u8 bf;
182 	u32 fbw;
183 	u32 div;
184 	int ret;
185 
186 	dprintk("%s\n", __func__);
187 	dprintk("Set frequency = %d, symbol rate = %d\n",
188 			c->frequency, c->symbol_rate);
189 
190 	/* Assumed 10.111 MHz crystal oscillator */
191 	/* Cancelled num/den 80 to prevent overflow */
192 	div = (c->frequency * 1000) / 126387;
193 	fbw = (c->symbol_rate * 27) / 32000;
194 	/* Cancelled num/den 10 to prevent overflow */
195 	bf = ((fbw * 5088) / 1011100) - 1;
196 
197 	/*PLL divider*/
198 	buf[0] = (div >> 8) & 0x7f;
199 	buf[1] = (div >> 0) & 0xff;
200 	/*Reference divider*/
201 	/* Select reference ratio of 80 */
202 	buf[2] = 0x1D;
203 	/*PLL test modes*/
204 	buf[3] = 0x40;
205 	/*RF Control register*/
206 	buf[4] = 0x6E; /* Bypass enable */
207 	/*Baseband filter cutoff */
208 	buf[5] = bf;
209 
210 	/* Open i2c gate */
211 	if (fe->ops.i2c_gate_ctrl)
212 		fe->ops.i2c_gate_ctrl(fe, 1);
213 	/* BR = 10, Enable filter adjustment */
214 	ret = zl10039_writereg(state, BASE1, 0x0A);
215 	if (ret < 0)
216 		goto error;
217 	/* Write new config values */
218 	ret = zl10039_write(state, PLL0, buf, sizeof(buf));
219 	if (ret < 0)
220 		goto error;
221 	/* BR = 10, Disable filter adjustment */
222 	ret = zl10039_writereg(state, BASE1, 0x6A);
223 	if (ret < 0)
224 		goto error;
225 
226 	/* Close i2c gate */
227 	if (fe->ops.i2c_gate_ctrl)
228 		fe->ops.i2c_gate_ctrl(fe, 0);
229 	return 0;
230 error:
231 	dprintk("Error setting tuner\n");
232 	return ret;
233 }
234 
zl10039_release(struct dvb_frontend * fe)235 static void zl10039_release(struct dvb_frontend *fe)
236 {
237 	struct zl10039_state *state = fe->tuner_priv;
238 
239 	dprintk("%s\n", __func__);
240 	kfree(state);
241 	fe->tuner_priv = NULL;
242 }
243 
244 static const struct dvb_tuner_ops zl10039_ops = {
245 	.release = zl10039_release,
246 	.init = zl10039_init,
247 	.sleep = zl10039_sleep,
248 	.set_params = zl10039_set_params,
249 };
250 
zl10039_attach(struct dvb_frontend * fe,u8 i2c_addr,struct i2c_adapter * i2c)251 struct dvb_frontend *zl10039_attach(struct dvb_frontend *fe,
252 		u8 i2c_addr, struct i2c_adapter *i2c)
253 {
254 	struct zl10039_state *state = NULL;
255 
256 	dprintk("%s\n", __func__);
257 	state = kmalloc(sizeof(struct zl10039_state), GFP_KERNEL);
258 	if (state == NULL)
259 		goto error;
260 
261 	state->i2c = i2c;
262 	state->i2c_addr = i2c_addr;
263 
264 	/* Open i2c gate */
265 	if (fe->ops.i2c_gate_ctrl)
266 		fe->ops.i2c_gate_ctrl(fe, 1);
267 	/* check if this is a valid tuner */
268 	if (zl10039_readreg(state, GENERAL, &state->id) < 0) {
269 		/* Close i2c gate */
270 		if (fe->ops.i2c_gate_ctrl)
271 			fe->ops.i2c_gate_ctrl(fe, 0);
272 		goto error;
273 	}
274 	/* Close i2c gate */
275 	if (fe->ops.i2c_gate_ctrl)
276 		fe->ops.i2c_gate_ctrl(fe, 0);
277 
278 	state->id = state->id & 0x0f;
279 	switch (state->id) {
280 	case ID_ZL10039:
281 		strscpy(fe->ops.tuner_ops.info.name,
282 			"Zarlink ZL10039 DVB-S tuner",
283 			sizeof(fe->ops.tuner_ops.info.name));
284 		break;
285 	default:
286 		dprintk("Chip ID=%x does not match a known type\n", state->id);
287 		goto error;
288 	}
289 
290 	memcpy(&fe->ops.tuner_ops, &zl10039_ops, sizeof(struct dvb_tuner_ops));
291 	fe->tuner_priv = state;
292 	dprintk("Tuner attached @ i2c address 0x%02x\n", i2c_addr);
293 	return fe;
294 error:
295 	kfree(state);
296 	return NULL;
297 }
298 EXPORT_SYMBOL(zl10039_attach);
299 
300 module_param(debug, int, 0644);
301 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
302 MODULE_DESCRIPTION("Zarlink ZL10039 DVB-S tuner driver");
303 MODULE_AUTHOR("Jan D. Louw <jd.louw@mweb.co.za>");
304 MODULE_LICENSE("GPL");
305