1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Atmel SMC (Static Memory Controller) helper functions.
4 *
5 * Copyright (C) 2017 Atmel
6 * Copyright (C) 2017 Free Electrons
7 *
8 * Author: Boris Brezillon <boris.brezillon@free-electrons.com>
9 */
10
11 #include <linux/mfd/syscon/atmel-smc.h>
12 #include <linux/string.h>
13
14 /**
15 * atmel_smc_cs_conf_init - initialize a SMC CS conf
16 * @conf: the SMC CS conf to initialize
17 *
18 * Set all fields to 0 so that one can start defining a new config.
19 */
atmel_smc_cs_conf_init(struct atmel_smc_cs_conf * conf)20 void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf)
21 {
22 memset(conf, 0, sizeof(*conf));
23 }
24 EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_init);
25
26 /**
27 * atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the
28 * format expected by the SMC engine
29 * @ncycles: number of MCK clk cycles
30 * @msbpos: position of the MSB part of the timing field
31 * @msbwidth: width of the MSB part of the timing field
32 * @msbfactor: factor applied to the MSB
33 * @encodedval: param used to store the encoding result
34 *
35 * This function encodes the @ncycles value as described in the datasheet
36 * (section "SMC Setup/Pulse/Cycle/Timings Register"). This is a generic
37 * helper which called with different parameter depending on the encoding
38 * scheme.
39 *
40 * If the @ncycles value is too big to be encoded, -ERANGE is returned and
41 * the encodedval is contains the maximum val. Otherwise, 0 is returned.
42 */
atmel_smc_cs_encode_ncycles(unsigned int ncycles,unsigned int msbpos,unsigned int msbwidth,unsigned int msbfactor,unsigned int * encodedval)43 static int atmel_smc_cs_encode_ncycles(unsigned int ncycles,
44 unsigned int msbpos,
45 unsigned int msbwidth,
46 unsigned int msbfactor,
47 unsigned int *encodedval)
48 {
49 unsigned int lsbmask = GENMASK(msbpos - 1, 0);
50 unsigned int msbmask = GENMASK(msbwidth - 1, 0);
51 unsigned int msb, lsb;
52 int ret = 0;
53
54 msb = ncycles / msbfactor;
55 lsb = ncycles % msbfactor;
56
57 if (lsb > lsbmask) {
58 lsb = 0;
59 msb++;
60 }
61
62 /*
63 * Let's just put the maximum we can if the requested setting does
64 * not fit in the register field.
65 * We still return -ERANGE in case the caller cares.
66 */
67 if (msb > msbmask) {
68 msb = msbmask;
69 lsb = lsbmask;
70 ret = -ERANGE;
71 }
72
73 *encodedval = (msb << msbpos) | lsb;
74
75 return ret;
76 }
77
78 /**
79 * atmel_smc_cs_conf_set_timing - set the SMC CS conf Txx parameter to a
80 * specific value
81 * @conf: SMC CS conf descriptor
82 * @shift: the position of the Txx field in the TIMINGS register
83 * @ncycles: value (expressed in MCK clk cycles) to assign to this Txx
84 * parameter
85 *
86 * This function encodes the @ncycles value as described in the datasheet
87 * (section "SMC Timings Register"), and then stores the result in the
88 * @conf->timings field at @shift position.
89 *
90 * Returns -EINVAL if shift is invalid, -ERANGE if ncycles does not fit in
91 * the field, and 0 otherwise.
92 */
atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf * conf,unsigned int shift,unsigned int ncycles)93 int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf,
94 unsigned int shift, unsigned int ncycles)
95 {
96 unsigned int val;
97 int ret;
98
99 if (shift != ATMEL_HSMC_TIMINGS_TCLR_SHIFT &&
100 shift != ATMEL_HSMC_TIMINGS_TADL_SHIFT &&
101 shift != ATMEL_HSMC_TIMINGS_TAR_SHIFT &&
102 shift != ATMEL_HSMC_TIMINGS_TRR_SHIFT &&
103 shift != ATMEL_HSMC_TIMINGS_TWB_SHIFT)
104 return -EINVAL;
105
106 /*
107 * The formula described in atmel datasheets (section "HSMC Timings
108 * Register"):
109 *
110 * ncycles = (Txx[3] * 64) + Txx[2:0]
111 */
112 ret = atmel_smc_cs_encode_ncycles(ncycles, 3, 1, 64, &val);
113 conf->timings &= ~GENMASK(shift + 3, shift);
114 conf->timings |= val << shift;
115
116 return ret;
117 }
118 EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_timing);
119
120 /**
121 * atmel_smc_cs_conf_set_setup - set the SMC CS conf xx_SETUP parameter to a
122 * specific value
123 * @conf: SMC CS conf descriptor
124 * @shift: the position of the xx_SETUP field in the SETUP register
125 * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_SETUP
126 * parameter
127 *
128 * This function encodes the @ncycles value as described in the datasheet
129 * (section "SMC Setup Register"), and then stores the result in the
130 * @conf->setup field at @shift position.
131 *
132 * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
133 * the field, and 0 otherwise.
134 */
atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf * conf,unsigned int shift,unsigned int ncycles)135 int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf,
136 unsigned int shift, unsigned int ncycles)
137 {
138 unsigned int val;
139 int ret;
140
141 if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
142 shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
143 return -EINVAL;
144
145 /*
146 * The formula described in atmel datasheets (section "SMC Setup
147 * Register"):
148 *
149 * ncycles = (128 * xx_SETUP[5]) + xx_SETUP[4:0]
150 */
151 ret = atmel_smc_cs_encode_ncycles(ncycles, 5, 1, 128, &val);
152 conf->setup &= ~GENMASK(shift + 7, shift);
153 conf->setup |= val << shift;
154
155 return ret;
156 }
157 EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_setup);
158
159 /**
160 * atmel_smc_cs_conf_set_pulse - set the SMC CS conf xx_PULSE parameter to a
161 * specific value
162 * @conf: SMC CS conf descriptor
163 * @shift: the position of the xx_PULSE field in the PULSE register
164 * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_PULSE
165 * parameter
166 *
167 * This function encodes the @ncycles value as described in the datasheet
168 * (section "SMC Pulse Register"), and then stores the result in the
169 * @conf->setup field at @shift position.
170 *
171 * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
172 * the field, and 0 otherwise.
173 */
atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf * conf,unsigned int shift,unsigned int ncycles)174 int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf,
175 unsigned int shift, unsigned int ncycles)
176 {
177 unsigned int val;
178 int ret;
179
180 if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT &&
181 shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT)
182 return -EINVAL;
183
184 /*
185 * The formula described in atmel datasheets (section "SMC Pulse
186 * Register"):
187 *
188 * ncycles = (256 * xx_PULSE[6]) + xx_PULSE[5:0]
189 */
190 ret = atmel_smc_cs_encode_ncycles(ncycles, 6, 1, 256, &val);
191 conf->pulse &= ~GENMASK(shift + 7, shift);
192 conf->pulse |= val << shift;
193
194 return ret;
195 }
196 EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse);
197
198 /**
199 * atmel_smc_cs_conf_set_cycle - set the SMC CS conf xx_CYCLE parameter to a
200 * specific value
201 * @conf: SMC CS conf descriptor
202 * @shift: the position of the xx_CYCLE field in the CYCLE register
203 * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_CYCLE
204 * parameter
205 *
206 * This function encodes the @ncycles value as described in the datasheet
207 * (section "SMC Cycle Register"), and then stores the result in the
208 * @conf->setup field at @shift position.
209 *
210 * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in
211 * the field, and 0 otherwise.
212 */
atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf * conf,unsigned int shift,unsigned int ncycles)213 int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf,
214 unsigned int shift, unsigned int ncycles)
215 {
216 unsigned int val;
217 int ret;
218
219 if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NRD_SHIFT)
220 return -EINVAL;
221
222 /*
223 * The formula described in atmel datasheets (section "SMC Cycle
224 * Register"):
225 *
226 * ncycles = (xx_CYCLE[8:7] * 256) + xx_CYCLE[6:0]
227 */
228 ret = atmel_smc_cs_encode_ncycles(ncycles, 7, 2, 256, &val);
229 conf->cycle &= ~GENMASK(shift + 15, shift);
230 conf->cycle |= val << shift;
231
232 return ret;
233 }
234 EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle);
235
236 /**
237 * atmel_smc_cs_conf_apply - apply an SMC CS conf
238 * @regmap: the SMC regmap
239 * @cs: the CS id
240 * @conf: the SMC CS conf to apply
241 *
242 * Applies an SMC CS configuration.
243 * Only valid on at91sam9 SoCs.
244 */
atmel_smc_cs_conf_apply(struct regmap * regmap,int cs,const struct atmel_smc_cs_conf * conf)245 void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs,
246 const struct atmel_smc_cs_conf *conf)
247 {
248 regmap_write(regmap, ATMEL_SMC_SETUP(cs), conf->setup);
249 regmap_write(regmap, ATMEL_SMC_PULSE(cs), conf->pulse);
250 regmap_write(regmap, ATMEL_SMC_CYCLE(cs), conf->cycle);
251 regmap_write(regmap, ATMEL_SMC_MODE(cs), conf->mode);
252 }
253 EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
254
255 /**
256 * atmel_hsmc_cs_conf_apply - apply an SMC CS conf
257 * @regmap: the HSMC regmap
258 * @cs: the CS id
259 * @layout: the layout of registers
260 * @conf: the SMC CS conf to apply
261 *
262 * Applies an SMC CS configuration.
263 * Only valid on post-sama5 SoCs.
264 */
atmel_hsmc_cs_conf_apply(struct regmap * regmap,const struct atmel_hsmc_reg_layout * layout,int cs,const struct atmel_smc_cs_conf * conf)265 void atmel_hsmc_cs_conf_apply(struct regmap *regmap,
266 const struct atmel_hsmc_reg_layout *layout,
267 int cs, const struct atmel_smc_cs_conf *conf)
268 {
269 regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup);
270 regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse);
271 regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle);
272 regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings);
273 regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode);
274 }
275 EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply);
276
277 /**
278 * atmel_smc_cs_conf_get - retrieve the current SMC CS conf
279 * @regmap: the SMC regmap
280 * @cs: the CS id
281 * @conf: the SMC CS conf object to store the current conf
282 *
283 * Retrieve the SMC CS configuration.
284 * Only valid on at91sam9 SoCs.
285 */
atmel_smc_cs_conf_get(struct regmap * regmap,int cs,struct atmel_smc_cs_conf * conf)286 void atmel_smc_cs_conf_get(struct regmap *regmap, int cs,
287 struct atmel_smc_cs_conf *conf)
288 {
289 regmap_read(regmap, ATMEL_SMC_SETUP(cs), &conf->setup);
290 regmap_read(regmap, ATMEL_SMC_PULSE(cs), &conf->pulse);
291 regmap_read(regmap, ATMEL_SMC_CYCLE(cs), &conf->cycle);
292 regmap_read(regmap, ATMEL_SMC_MODE(cs), &conf->mode);
293 }
294 EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get);
295
296 /**
297 * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf
298 * @regmap: the HSMC regmap
299 * @cs: the CS id
300 * @layout: the layout of registers
301 * @conf: the SMC CS conf object to store the current conf
302 *
303 * Retrieve the SMC CS configuration.
304 * Only valid on post-sama5 SoCs.
305 */
atmel_hsmc_cs_conf_get(struct regmap * regmap,const struct atmel_hsmc_reg_layout * layout,int cs,struct atmel_smc_cs_conf * conf)306 void atmel_hsmc_cs_conf_get(struct regmap *regmap,
307 const struct atmel_hsmc_reg_layout *layout,
308 int cs, struct atmel_smc_cs_conf *conf)
309 {
310 regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup);
311 regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse);
312 regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle);
313 regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings);
314 regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode);
315 }
316 EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get);
317
318 static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = {
319 .timing_regs_offset = 0x600,
320 };
321
322 static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = {
323 .timing_regs_offset = 0x700,
324 };
325
326 static const struct of_device_id atmel_smc_ids[] = {
327 { .compatible = "atmel,at91sam9260-smc", .data = NULL },
328 { .compatible = "atmel,sama5d3-smc", .data = &sama5d3_reg_layout },
329 { .compatible = "atmel,sama5d2-smc", .data = &sama5d2_reg_layout },
330 { /* sentinel */ },
331 };
332
333 /**
334 * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers
335 * @np: the HSMC regmap
336 *
337 * Retrieve the layout of HSMC registers.
338 *
339 * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer
340 * in HSMC case, otherwise ERR_PTR(-EINVAL).
341 */
342 const struct atmel_hsmc_reg_layout *
atmel_hsmc_get_reg_layout(struct device_node * np)343 atmel_hsmc_get_reg_layout(struct device_node *np)
344 {
345 const struct of_device_id *match;
346
347 match = of_match_node(atmel_smc_ids, np);
348
349 return match ? match->data : ERR_PTR(-EINVAL);
350 }
351 EXPORT_SYMBOL_GPL(atmel_hsmc_get_reg_layout);
352