1 // SPDX-License-Identifier: GPL-2.0-only
2 // Copyright (C) 2014 Broadcom Corporation
3
4 /*
5 * iProc SDHCI platform driver
6 */
7
8 #include <linux/acpi.h>
9 #include <linux/delay.h>
10 #include <linux/module.h>
11 #include <linux/mmc/host.h>
12 #include <linux/of.h>
13 #include <linux/of_device.h>
14 #include "sdhci-pltfm.h"
15
16 struct sdhci_iproc_data {
17 const struct sdhci_pltfm_data *pdata;
18 u32 caps;
19 u32 caps1;
20 u32 mmc_caps;
21 bool missing_caps;
22 };
23
24 struct sdhci_iproc_host {
25 const struct sdhci_iproc_data *data;
26 u32 shadow_cmd;
27 u32 shadow_blk;
28 bool is_cmd_shadowed;
29 bool is_blk_shadowed;
30 };
31
32 #define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)
33
sdhci_iproc_readl(struct sdhci_host * host,int reg)34 static inline u32 sdhci_iproc_readl(struct sdhci_host *host, int reg)
35 {
36 u32 val = readl(host->ioaddr + reg);
37
38 pr_debug("%s: readl [0x%02x] 0x%08x\n",
39 mmc_hostname(host->mmc), reg, val);
40 return val;
41 }
42
sdhci_iproc_readw(struct sdhci_host * host,int reg)43 static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
44 {
45 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
46 struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
47 u32 val;
48 u16 word;
49
50 if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) {
51 /* Get the saved transfer mode */
52 val = iproc_host->shadow_cmd;
53 } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
54 iproc_host->is_blk_shadowed) {
55 /* Get the saved block info */
56 val = iproc_host->shadow_blk;
57 } else {
58 val = sdhci_iproc_readl(host, (reg & ~3));
59 }
60 word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
61 return word;
62 }
63
sdhci_iproc_readb(struct sdhci_host * host,int reg)64 static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg)
65 {
66 u32 val = sdhci_iproc_readl(host, (reg & ~3));
67 u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff;
68 return byte;
69 }
70
sdhci_iproc_writel(struct sdhci_host * host,u32 val,int reg)71 static inline void sdhci_iproc_writel(struct sdhci_host *host, u32 val, int reg)
72 {
73 pr_debug("%s: writel [0x%02x] 0x%08x\n",
74 mmc_hostname(host->mmc), reg, val);
75
76 writel(val, host->ioaddr + reg);
77
78 if (host->clock <= 400000) {
79 /* Round up to micro-second four SD clock delay */
80 if (host->clock)
81 udelay((4 * 1000000 + host->clock - 1) / host->clock);
82 else
83 udelay(10);
84 }
85 }
86
87 /*
88 * The Arasan has a bugette whereby it may lose the content of successive
89 * writes to the same register that are within two SD-card clock cycles of
90 * each other (a clock domain crossing problem). The data
91 * register does not have this problem, which is just as well - otherwise we'd
92 * have to nobble the DMA engine too.
93 *
94 * This wouldn't be a problem with the code except that we can only write the
95 * controller with 32-bit writes. So two different 16-bit registers are
96 * written back to back creates the problem.
97 *
98 * In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT
99 * are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND.
100 * The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so
101 * the work around can be further optimized. We can keep shadow values of
102 * BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued.
103 * Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed
104 * by the TRANSFER+COMMAND in another 32-bit write.
105 */
sdhci_iproc_writew(struct sdhci_host * host,u16 val,int reg)106 static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
107 {
108 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
109 struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
110 u32 word_shift = REG_OFFSET_IN_BITS(reg);
111 u32 mask = 0xffff << word_shift;
112 u32 oldval, newval;
113
114 if (reg == SDHCI_COMMAND) {
115 /* Write the block now as we are issuing a command */
116 if (iproc_host->is_blk_shadowed) {
117 sdhci_iproc_writel(host, iproc_host->shadow_blk,
118 SDHCI_BLOCK_SIZE);
119 iproc_host->is_blk_shadowed = false;
120 }
121 oldval = iproc_host->shadow_cmd;
122 iproc_host->is_cmd_shadowed = false;
123 } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
124 iproc_host->is_blk_shadowed) {
125 /* Block size and count are stored in shadow reg */
126 oldval = iproc_host->shadow_blk;
127 } else {
128 /* Read reg, all other registers are not shadowed */
129 oldval = sdhci_iproc_readl(host, (reg & ~3));
130 }
131 newval = (oldval & ~mask) | (val << word_shift);
132
133 if (reg == SDHCI_TRANSFER_MODE) {
134 /* Save the transfer mode until the command is issued */
135 iproc_host->shadow_cmd = newval;
136 iproc_host->is_cmd_shadowed = true;
137 } else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
138 /* Save the block info until the command is issued */
139 iproc_host->shadow_blk = newval;
140 iproc_host->is_blk_shadowed = true;
141 } else {
142 /* Command or other regular 32-bit write */
143 sdhci_iproc_writel(host, newval, reg & ~3);
144 }
145 }
146
sdhci_iproc_writeb(struct sdhci_host * host,u8 val,int reg)147 static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
148 {
149 u32 oldval = sdhci_iproc_readl(host, (reg & ~3));
150 u32 byte_shift = REG_OFFSET_IN_BITS(reg);
151 u32 mask = 0xff << byte_shift;
152 u32 newval = (oldval & ~mask) | (val << byte_shift);
153
154 sdhci_iproc_writel(host, newval, reg & ~3);
155 }
156
sdhci_iproc_get_max_clock(struct sdhci_host * host)157 static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
158 {
159 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
160
161 if (pltfm_host->clk)
162 return sdhci_pltfm_clk_get_max_clock(host);
163 else
164 return pltfm_host->clock;
165 }
166
167 /*
168 * There is a known bug on BCM2711's SDHCI core integration where the
169 * controller will hang when the difference between the core clock and the bus
170 * clock is too great. Specifically this can be reproduced under the following
171 * conditions:
172 *
173 * - No SD card plugged in, polling thread is running, probing cards at
174 * 100 kHz.
175 * - BCM2711's core clock configured at 500MHz or more
176 *
177 * So we set 200kHz as the minimum clock frequency available for that SoC.
178 */
sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host * host)179 static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host)
180 {
181 return 200000;
182 }
183
184 static const struct sdhci_ops sdhci_iproc_ops = {
185 .set_clock = sdhci_set_clock,
186 .get_max_clock = sdhci_iproc_get_max_clock,
187 .set_bus_width = sdhci_set_bus_width,
188 .reset = sdhci_reset,
189 .set_uhs_signaling = sdhci_set_uhs_signaling,
190 };
191
192 static const struct sdhci_ops sdhci_iproc_32only_ops = {
193 .read_l = sdhci_iproc_readl,
194 .read_w = sdhci_iproc_readw,
195 .read_b = sdhci_iproc_readb,
196 .write_l = sdhci_iproc_writel,
197 .write_w = sdhci_iproc_writew,
198 .write_b = sdhci_iproc_writeb,
199 .set_clock = sdhci_set_clock,
200 .get_max_clock = sdhci_iproc_get_max_clock,
201 .set_bus_width = sdhci_set_bus_width,
202 .reset = sdhci_reset,
203 .set_uhs_signaling = sdhci_set_uhs_signaling,
204 };
205
206 static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = {
207 .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
208 SDHCI_QUIRK_NO_HISPD_BIT,
209 .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN | SDHCI_QUIRK2_HOST_OFF_CARD_ON,
210 .ops = &sdhci_iproc_32only_ops,
211 };
212
213 static const struct sdhci_iproc_data iproc_cygnus_data = {
214 .pdata = &sdhci_iproc_cygnus_pltfm_data,
215 .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
216 & SDHCI_MAX_BLOCK_MASK) |
217 SDHCI_CAN_VDD_330 |
218 SDHCI_CAN_VDD_180 |
219 SDHCI_CAN_DO_SUSPEND |
220 SDHCI_CAN_DO_HISPD |
221 SDHCI_CAN_DO_ADMA2 |
222 SDHCI_CAN_DO_SDMA,
223 .caps1 = SDHCI_DRIVER_TYPE_C |
224 SDHCI_DRIVER_TYPE_D |
225 SDHCI_SUPPORT_DDR50,
226 .mmc_caps = MMC_CAP_1_8V_DDR,
227 };
228
229 static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
230 .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
231 SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
232 SDHCI_QUIRK_NO_HISPD_BIT,
233 .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
234 .ops = &sdhci_iproc_ops,
235 };
236
237 static const struct sdhci_iproc_data iproc_data = {
238 .pdata = &sdhci_iproc_pltfm_data,
239 .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
240 & SDHCI_MAX_BLOCK_MASK) |
241 SDHCI_CAN_VDD_330 |
242 SDHCI_CAN_VDD_180 |
243 SDHCI_CAN_DO_SUSPEND |
244 SDHCI_CAN_DO_HISPD |
245 SDHCI_CAN_DO_ADMA2 |
246 SDHCI_CAN_DO_SDMA,
247 .caps1 = SDHCI_DRIVER_TYPE_C |
248 SDHCI_DRIVER_TYPE_D |
249 SDHCI_SUPPORT_DDR50,
250 };
251
252 static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
253 .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
254 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
255 SDHCI_QUIRK_NO_HISPD_BIT,
256 .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
257 .ops = &sdhci_iproc_32only_ops,
258 };
259
260 static const struct sdhci_iproc_data bcm2835_data = {
261 .pdata = &sdhci_bcm2835_pltfm_data,
262 .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
263 & SDHCI_MAX_BLOCK_MASK) |
264 SDHCI_CAN_VDD_330 |
265 SDHCI_CAN_DO_HISPD,
266 .caps1 = SDHCI_DRIVER_TYPE_A |
267 SDHCI_DRIVER_TYPE_C,
268 .mmc_caps = 0x00000000,
269 .missing_caps = true,
270 };
271
272 static const struct sdhci_ops sdhci_iproc_bcm2711_ops = {
273 .read_l = sdhci_iproc_readl,
274 .read_w = sdhci_iproc_readw,
275 .read_b = sdhci_iproc_readb,
276 .write_l = sdhci_iproc_writel,
277 .write_w = sdhci_iproc_writew,
278 .write_b = sdhci_iproc_writeb,
279 .set_clock = sdhci_set_clock,
280 .set_power = sdhci_set_power_and_bus_voltage,
281 .get_max_clock = sdhci_iproc_get_max_clock,
282 .get_min_clock = sdhci_iproc_bcm2711_get_min_clock,
283 .set_bus_width = sdhci_set_bus_width,
284 .reset = sdhci_reset,
285 .set_uhs_signaling = sdhci_set_uhs_signaling,
286 };
287
288 static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = {
289 .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
290 .ops = &sdhci_iproc_bcm2711_ops,
291 };
292
293 static const struct sdhci_iproc_data bcm2711_data = {
294 .pdata = &sdhci_bcm2711_pltfm_data,
295 .mmc_caps = MMC_CAP_3_3V_DDR,
296 };
297
298 static const struct sdhci_pltfm_data sdhci_bcm7211a0_pltfm_data = {
299 .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
300 SDHCI_QUIRK_BROKEN_DMA |
301 SDHCI_QUIRK_BROKEN_ADMA,
302 .ops = &sdhci_iproc_ops,
303 };
304
305 #define BCM7211A0_BASE_CLK_MHZ 100
306 static const struct sdhci_iproc_data bcm7211a0_data = {
307 .pdata = &sdhci_bcm7211a0_pltfm_data,
308 .caps = ((BCM7211A0_BASE_CLK_MHZ / 2) << SDHCI_TIMEOUT_CLK_SHIFT) |
309 (BCM7211A0_BASE_CLK_MHZ << SDHCI_CLOCK_BASE_SHIFT) |
310 ((0x2 << SDHCI_MAX_BLOCK_SHIFT)
311 & SDHCI_MAX_BLOCK_MASK) |
312 SDHCI_CAN_VDD_330 |
313 SDHCI_CAN_VDD_180 |
314 SDHCI_CAN_DO_SUSPEND |
315 SDHCI_CAN_DO_HISPD,
316 .caps1 = SDHCI_DRIVER_TYPE_C |
317 SDHCI_DRIVER_TYPE_D,
318 .missing_caps = true,
319 };
320
321 static const struct of_device_id sdhci_iproc_of_match[] = {
322 { .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data },
323 { .compatible = "brcm,bcm2711-emmc2", .data = &bcm2711_data },
324 { .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data},
325 { .compatible = "brcm,sdhci-iproc", .data = &iproc_data },
326 { .compatible = "brcm,bcm7211a0-sdhci", .data = &bcm7211a0_data },
327 { }
328 };
329 MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);
330
331 #ifdef CONFIG_ACPI
332 /*
333 * This is a duplicate of bcm2835_(pltfrm_)data without caps quirks
334 * which are provided by the ACPI table.
335 */
336 static const struct sdhci_pltfm_data sdhci_bcm_arasan_data = {
337 .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
338 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
339 SDHCI_QUIRK_NO_HISPD_BIT,
340 .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
341 .ops = &sdhci_iproc_32only_ops,
342 };
343
344 static const struct sdhci_iproc_data bcm_arasan_data = {
345 .pdata = &sdhci_bcm_arasan_data,
346 };
347
348 static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
349 { .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data },
350 { .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
351 { .id = "BCM2847", .driver_data = (kernel_ulong_t)&bcm_arasan_data },
352 { .id = "BRCME88C", .driver_data = (kernel_ulong_t)&bcm2711_data },
353 { /* sentinel */ }
354 };
355 MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
356 #endif
357
sdhci_iproc_probe(struct platform_device * pdev)358 static int sdhci_iproc_probe(struct platform_device *pdev)
359 {
360 struct device *dev = &pdev->dev;
361 const struct sdhci_iproc_data *iproc_data = NULL;
362 struct sdhci_host *host;
363 struct sdhci_iproc_host *iproc_host;
364 struct sdhci_pltfm_host *pltfm_host;
365 int ret;
366
367 iproc_data = device_get_match_data(dev);
368 if (!iproc_data)
369 return -ENODEV;
370
371 host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
372 if (IS_ERR(host))
373 return PTR_ERR(host);
374
375 pltfm_host = sdhci_priv(host);
376 iproc_host = sdhci_pltfm_priv(pltfm_host);
377
378 iproc_host->data = iproc_data;
379
380 ret = mmc_of_parse(host->mmc);
381 if (ret)
382 goto err;
383
384 sdhci_get_property(pdev);
385
386 host->mmc->caps |= iproc_host->data->mmc_caps;
387
388 if (dev->of_node) {
389 pltfm_host->clk = devm_clk_get(dev, NULL);
390 if (IS_ERR(pltfm_host->clk)) {
391 ret = PTR_ERR(pltfm_host->clk);
392 goto err;
393 }
394 ret = clk_prepare_enable(pltfm_host->clk);
395 if (ret) {
396 dev_err(dev, "failed to enable host clk\n");
397 goto err;
398 }
399 }
400
401 if (iproc_host->data->missing_caps) {
402 __sdhci_read_caps(host, NULL,
403 &iproc_host->data->caps,
404 &iproc_host->data->caps1);
405 }
406
407 ret = sdhci_add_host(host);
408 if (ret)
409 goto err_clk;
410
411 return 0;
412
413 err_clk:
414 if (dev->of_node)
415 clk_disable_unprepare(pltfm_host->clk);
416 err:
417 sdhci_pltfm_free(pdev);
418 return ret;
419 }
420
sdhci_iproc_shutdown(struct platform_device * pdev)421 static void sdhci_iproc_shutdown(struct platform_device *pdev)
422 {
423 sdhci_pltfm_suspend(&pdev->dev);
424 }
425
426 static struct platform_driver sdhci_iproc_driver = {
427 .driver = {
428 .name = "sdhci-iproc",
429 .probe_type = PROBE_PREFER_ASYNCHRONOUS,
430 .of_match_table = sdhci_iproc_of_match,
431 .acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
432 .pm = &sdhci_pltfm_pmops,
433 },
434 .probe = sdhci_iproc_probe,
435 .remove = sdhci_pltfm_unregister,
436 .shutdown = sdhci_iproc_shutdown,
437 };
438 module_platform_driver(sdhci_iproc_driver);
439
440 MODULE_AUTHOR("Broadcom");
441 MODULE_DESCRIPTION("IPROC SDHCI driver");
442 MODULE_LICENSE("GPL v2");
443