1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * sst25l.c
4 *
5 * Driver for SST25L SPI Flash chips
6 *
7 * Copyright © 2009 Bluewater Systems Ltd
8 * Author: Andre Renaud <andre@bluewatersys.com>
9 * Author: Ryan Mallon
10 *
11 * Based on m25p80.c
12 */
13
14 #include <linux/module.h>
15 #include <linux/device.h>
16 #include <linux/mutex.h>
17 #include <linux/interrupt.h>
18 #include <linux/slab.h>
19 #include <linux/sched.h>
20
21 #include <linux/mtd/mtd.h>
22 #include <linux/mtd/partitions.h>
23
24 #include <linux/spi/spi.h>
25 #include <linux/spi/flash.h>
26
27 /* Erases can take up to 3 seconds! */
28 #define MAX_READY_WAIT_JIFFIES msecs_to_jiffies(3000)
29
30 #define SST25L_CMD_WRSR 0x01 /* Write status register */
31 #define SST25L_CMD_WRDI 0x04 /* Write disable */
32 #define SST25L_CMD_RDSR 0x05 /* Read status register */
33 #define SST25L_CMD_WREN 0x06 /* Write enable */
34 #define SST25L_CMD_READ 0x03 /* High speed read */
35
36 #define SST25L_CMD_EWSR 0x50 /* Enable write status register */
37 #define SST25L_CMD_SECTOR_ERASE 0x20 /* Erase sector */
38 #define SST25L_CMD_READ_ID 0x90 /* Read device ID */
39 #define SST25L_CMD_AAI_PROGRAM 0xaf /* Auto address increment */
40
41 #define SST25L_STATUS_BUSY (1 << 0) /* Chip is busy */
42 #define SST25L_STATUS_WREN (1 << 1) /* Write enabled */
43 #define SST25L_STATUS_BP0 (1 << 2) /* Block protection 0 */
44 #define SST25L_STATUS_BP1 (1 << 3) /* Block protection 1 */
45
46 struct sst25l_flash {
47 struct spi_device *spi;
48 struct mutex lock;
49 struct mtd_info mtd;
50 };
51
52 struct flash_info {
53 const char *name;
54 uint16_t device_id;
55 unsigned page_size;
56 unsigned nr_pages;
57 unsigned erase_size;
58 };
59
60 #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
61
62 static struct flash_info sst25l_flash_info[] = {
63 {"sst25lf020a", 0xbf43, 256, 1024, 4096},
64 {"sst25lf040a", 0xbf44, 256, 2048, 4096},
65 };
66
sst25l_status(struct sst25l_flash * flash,int * status)67 static int sst25l_status(struct sst25l_flash *flash, int *status)
68 {
69 struct spi_message m;
70 struct spi_transfer t;
71 unsigned char cmd_resp[2];
72 int err;
73
74 spi_message_init(&m);
75 memset(&t, 0, sizeof(struct spi_transfer));
76
77 cmd_resp[0] = SST25L_CMD_RDSR;
78 cmd_resp[1] = 0xff;
79 t.tx_buf = cmd_resp;
80 t.rx_buf = cmd_resp;
81 t.len = sizeof(cmd_resp);
82 spi_message_add_tail(&t, &m);
83 err = spi_sync(flash->spi, &m);
84 if (err < 0)
85 return err;
86
87 *status = cmd_resp[1];
88 return 0;
89 }
90
sst25l_write_enable(struct sst25l_flash * flash,int enable)91 static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
92 {
93 unsigned char command[2];
94 int status, err;
95
96 command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
97 err = spi_write(flash->spi, command, 1);
98 if (err)
99 return err;
100
101 command[0] = SST25L_CMD_EWSR;
102 err = spi_write(flash->spi, command, 1);
103 if (err)
104 return err;
105
106 command[0] = SST25L_CMD_WRSR;
107 command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
108 err = spi_write(flash->spi, command, 2);
109 if (err)
110 return err;
111
112 if (enable) {
113 err = sst25l_status(flash, &status);
114 if (err)
115 return err;
116 if (!(status & SST25L_STATUS_WREN))
117 return -EROFS;
118 }
119
120 return 0;
121 }
122
sst25l_wait_till_ready(struct sst25l_flash * flash)123 static int sst25l_wait_till_ready(struct sst25l_flash *flash)
124 {
125 unsigned long deadline;
126 int status, err;
127
128 deadline = jiffies + MAX_READY_WAIT_JIFFIES;
129 do {
130 err = sst25l_status(flash, &status);
131 if (err)
132 return err;
133 if (!(status & SST25L_STATUS_BUSY))
134 return 0;
135
136 cond_resched();
137 } while (!time_after_eq(jiffies, deadline));
138
139 return -ETIMEDOUT;
140 }
141
sst25l_erase_sector(struct sst25l_flash * flash,uint32_t offset)142 static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
143 {
144 unsigned char command[4];
145 int err;
146
147 err = sst25l_write_enable(flash, 1);
148 if (err)
149 return err;
150
151 command[0] = SST25L_CMD_SECTOR_ERASE;
152 command[1] = offset >> 16;
153 command[2] = offset >> 8;
154 command[3] = offset;
155 err = spi_write(flash->spi, command, 4);
156 if (err)
157 return err;
158
159 err = sst25l_wait_till_ready(flash);
160 if (err)
161 return err;
162
163 return sst25l_write_enable(flash, 0);
164 }
165
sst25l_erase(struct mtd_info * mtd,struct erase_info * instr)166 static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
167 {
168 struct sst25l_flash *flash = to_sst25l_flash(mtd);
169 uint32_t addr, end;
170 int err;
171
172 /* Sanity checks */
173 if ((uint32_t)instr->len % mtd->erasesize)
174 return -EINVAL;
175
176 if ((uint32_t)instr->addr % mtd->erasesize)
177 return -EINVAL;
178
179 addr = instr->addr;
180 end = addr + instr->len;
181
182 mutex_lock(&flash->lock);
183
184 err = sst25l_wait_till_ready(flash);
185 if (err) {
186 mutex_unlock(&flash->lock);
187 return err;
188 }
189
190 while (addr < end) {
191 err = sst25l_erase_sector(flash, addr);
192 if (err) {
193 mutex_unlock(&flash->lock);
194 dev_err(&flash->spi->dev, "Erase failed\n");
195 return err;
196 }
197
198 addr += mtd->erasesize;
199 }
200
201 mutex_unlock(&flash->lock);
202
203 return 0;
204 }
205
sst25l_read(struct mtd_info * mtd,loff_t from,size_t len,size_t * retlen,unsigned char * buf)206 static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
207 size_t *retlen, unsigned char *buf)
208 {
209 struct sst25l_flash *flash = to_sst25l_flash(mtd);
210 struct spi_transfer transfer[2];
211 struct spi_message message;
212 unsigned char command[4];
213 int ret;
214
215 spi_message_init(&message);
216 memset(&transfer, 0, sizeof(transfer));
217
218 command[0] = SST25L_CMD_READ;
219 command[1] = from >> 16;
220 command[2] = from >> 8;
221 command[3] = from;
222
223 transfer[0].tx_buf = command;
224 transfer[0].len = sizeof(command);
225 spi_message_add_tail(&transfer[0], &message);
226
227 transfer[1].rx_buf = buf;
228 transfer[1].len = len;
229 spi_message_add_tail(&transfer[1], &message);
230
231 mutex_lock(&flash->lock);
232
233 /* Wait for previous write/erase to complete */
234 ret = sst25l_wait_till_ready(flash);
235 if (ret) {
236 mutex_unlock(&flash->lock);
237 return ret;
238 }
239
240 spi_sync(flash->spi, &message);
241
242 if (retlen && message.actual_length > sizeof(command))
243 *retlen += message.actual_length - sizeof(command);
244
245 mutex_unlock(&flash->lock);
246 return 0;
247 }
248
sst25l_write(struct mtd_info * mtd,loff_t to,size_t len,size_t * retlen,const unsigned char * buf)249 static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
250 size_t *retlen, const unsigned char *buf)
251 {
252 struct sst25l_flash *flash = to_sst25l_flash(mtd);
253 int i, j, ret, bytes, copied = 0;
254 unsigned char command[5];
255
256 if ((uint32_t)to % mtd->writesize)
257 return -EINVAL;
258
259 mutex_lock(&flash->lock);
260
261 ret = sst25l_write_enable(flash, 1);
262 if (ret)
263 goto out;
264
265 for (i = 0; i < len; i += mtd->writesize) {
266 ret = sst25l_wait_till_ready(flash);
267 if (ret)
268 goto out;
269
270 /* Write the first byte of the page */
271 command[0] = SST25L_CMD_AAI_PROGRAM;
272 command[1] = (to + i) >> 16;
273 command[2] = (to + i) >> 8;
274 command[3] = (to + i);
275 command[4] = buf[i];
276 ret = spi_write(flash->spi, command, 5);
277 if (ret < 0)
278 goto out;
279 copied++;
280
281 /*
282 * Write the remaining bytes using auto address
283 * increment mode
284 */
285 bytes = min_t(uint32_t, mtd->writesize, len - i);
286 for (j = 1; j < bytes; j++, copied++) {
287 ret = sst25l_wait_till_ready(flash);
288 if (ret)
289 goto out;
290
291 command[1] = buf[i + j];
292 ret = spi_write(flash->spi, command, 2);
293 if (ret)
294 goto out;
295 }
296 }
297
298 out:
299 ret = sst25l_write_enable(flash, 0);
300
301 if (retlen)
302 *retlen = copied;
303
304 mutex_unlock(&flash->lock);
305 return ret;
306 }
307
sst25l_match_device(struct spi_device * spi)308 static struct flash_info *sst25l_match_device(struct spi_device *spi)
309 {
310 struct flash_info *flash_info = NULL;
311 struct spi_message m;
312 struct spi_transfer t;
313 unsigned char cmd_resp[6];
314 int i, err;
315 uint16_t id;
316
317 spi_message_init(&m);
318 memset(&t, 0, sizeof(struct spi_transfer));
319
320 cmd_resp[0] = SST25L_CMD_READ_ID;
321 cmd_resp[1] = 0;
322 cmd_resp[2] = 0;
323 cmd_resp[3] = 0;
324 cmd_resp[4] = 0xff;
325 cmd_resp[5] = 0xff;
326 t.tx_buf = cmd_resp;
327 t.rx_buf = cmd_resp;
328 t.len = sizeof(cmd_resp);
329 spi_message_add_tail(&t, &m);
330 err = spi_sync(spi, &m);
331 if (err < 0) {
332 dev_err(&spi->dev, "error reading device id\n");
333 return NULL;
334 }
335
336 id = (cmd_resp[4] << 8) | cmd_resp[5];
337
338 for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
339 if (sst25l_flash_info[i].device_id == id)
340 flash_info = &sst25l_flash_info[i];
341
342 if (!flash_info)
343 dev_err(&spi->dev, "unknown id %.4x\n", id);
344
345 return flash_info;
346 }
347
sst25l_probe(struct spi_device * spi)348 static int sst25l_probe(struct spi_device *spi)
349 {
350 struct flash_info *flash_info;
351 struct sst25l_flash *flash;
352 struct flash_platform_data *data;
353 int ret;
354
355 flash_info = sst25l_match_device(spi);
356 if (!flash_info)
357 return -ENODEV;
358
359 flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
360 if (!flash)
361 return -ENOMEM;
362
363 flash->spi = spi;
364 mutex_init(&flash->lock);
365 spi_set_drvdata(spi, flash);
366
367 data = dev_get_platdata(&spi->dev);
368 if (data && data->name)
369 flash->mtd.name = data->name;
370
371 flash->mtd.dev.parent = &spi->dev;
372 flash->mtd.type = MTD_NORFLASH;
373 flash->mtd.flags = MTD_CAP_NORFLASH;
374 flash->mtd.erasesize = flash_info->erase_size;
375 flash->mtd.writesize = flash_info->page_size;
376 flash->mtd.writebufsize = flash_info->page_size;
377 flash->mtd.size = flash_info->page_size * flash_info->nr_pages;
378 flash->mtd._erase = sst25l_erase;
379 flash->mtd._read = sst25l_read;
380 flash->mtd._write = sst25l_write;
381
382 dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
383 (long long)flash->mtd.size >> 10);
384
385 pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
386 ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
387 flash->mtd.name,
388 (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
389 flash->mtd.erasesize, flash->mtd.erasesize / 1024,
390 flash->mtd.numeraseregions);
391
392
393 ret = mtd_device_register(&flash->mtd, data ? data->parts : NULL,
394 data ? data->nr_parts : 0);
395 if (ret)
396 return -ENODEV;
397
398 return 0;
399 }
400
sst25l_remove(struct spi_device * spi)401 static void sst25l_remove(struct spi_device *spi)
402 {
403 struct sst25l_flash *flash = spi_get_drvdata(spi);
404
405 WARN_ON(mtd_device_unregister(&flash->mtd));
406 }
407
408 static struct spi_driver sst25l_driver = {
409 .driver = {
410 .name = "sst25l",
411 },
412 .probe = sst25l_probe,
413 .remove = sst25l_remove,
414 };
415
416 module_spi_driver(sst25l_driver);
417
418 MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
419 MODULE_AUTHOR("Andre Renaud <andre@bluewatersys.com>, "
420 "Ryan Mallon");
421 MODULE_LICENSE("GPL");
422