1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * wanXL serial card driver for Linux
4 * host part
5 *
6 * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl>
7 *
8 * Status:
9 * - Only DTE (external clock) support with NRZ and NRZI encodings
10 * - wanXL100 will require minor driver modifications, no access to hw
11 */
12
13 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
14
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/slab.h>
18 #include <linux/sched.h>
19 #include <linux/types.h>
20 #include <linux/fcntl.h>
21 #include <linux/string.h>
22 #include <linux/errno.h>
23 #include <linux/init.h>
24 #include <linux/interrupt.h>
25 #include <linux/ioport.h>
26 #include <linux/netdevice.h>
27 #include <linux/hdlc.h>
28 #include <linux/pci.h>
29 #include <linux/dma-mapping.h>
30 #include <linux/delay.h>
31 #include <asm/io.h>
32
33 #include "wanxl.h"
34
35 static const char *version = "wanXL serial card driver version: 0.48";
36
37 #define PLX_CTL_RESET 0x40000000 /* adapter reset */
38
39 #undef DEBUG_PKT
40 #undef DEBUG_PCI
41
42 /* MAILBOX #1 - PUTS COMMANDS */
43 #define MBX1_CMD_ABORTJ 0x85000000 /* Abort and Jump */
44 #ifdef __LITTLE_ENDIAN
45 #define MBX1_CMD_BSWAP 0x8C000001 /* little-endian Byte Swap Mode */
46 #else
47 #define MBX1_CMD_BSWAP 0x8C000000 /* big-endian Byte Swap Mode */
48 #endif
49
50 /* MAILBOX #2 - DRAM SIZE */
51 #define MBX2_MEMSZ_MASK 0xFFFF0000 /* PUTS Memory Size Register mask */
52
53 struct port {
54 struct net_device *dev;
55 struct card *card;
56 spinlock_t lock; /* for wanxl_xmit */
57 int node; /* physical port #0 - 3 */
58 unsigned int clock_type;
59 int tx_in, tx_out;
60 struct sk_buff *tx_skbs[TX_BUFFERS];
61 };
62
63 struct card_status {
64 desc_t rx_descs[RX_QUEUE_LENGTH];
65 port_status_t port_status[4];
66 };
67
68 struct card {
69 int n_ports; /* 1, 2 or 4 ports */
70 u8 irq;
71
72 u8 __iomem *plx; /* PLX PCI9060 virtual base address */
73 struct pci_dev *pdev; /* for pci_name(pdev) */
74 int rx_in;
75 struct sk_buff *rx_skbs[RX_QUEUE_LENGTH];
76 struct card_status *status; /* shared between host and card */
77 dma_addr_t status_address;
78 struct port ports[]; /* 1 - 4 port structures follow */
79 };
80
dev_to_port(struct net_device * dev)81 static inline struct port *dev_to_port(struct net_device *dev)
82 {
83 return (struct port *)dev_to_hdlc(dev)->priv;
84 }
85
get_status(struct port * port)86 static inline port_status_t *get_status(struct port *port)
87 {
88 return &port->card->status->port_status[port->node];
89 }
90
91 #ifdef DEBUG_PCI
pci_map_single_debug(struct pci_dev * pdev,void * ptr,size_t size,int direction)92 static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr,
93 size_t size, int direction)
94 {
95 dma_addr_t addr = dma_map_single(&pdev->dev, ptr, size, direction);
96
97 if (addr + size > 0x100000000LL)
98 pr_crit("%s: pci_map_single() returned memory at 0x%llx!\n",
99 pci_name(pdev), (unsigned long long)addr);
100 return addr;
101 }
102
103 #undef pci_map_single
104 #define pci_map_single pci_map_single_debug
105 #endif
106
107 /* Cable and/or personality module change interrupt service */
wanxl_cable_intr(struct port * port)108 static inline void wanxl_cable_intr(struct port *port)
109 {
110 u32 value = get_status(port)->cable;
111 int valid = 1;
112 const char *cable, *pm, *dte = "", *dsr = "", *dcd = "";
113
114 switch (value & 0x7) {
115 case STATUS_CABLE_V35:
116 cable = "V.35";
117 break;
118 case STATUS_CABLE_X21:
119 cable = "X.21";
120 break;
121 case STATUS_CABLE_V24:
122 cable = "V.24";
123 break;
124 case STATUS_CABLE_EIA530:
125 cable = "EIA530";
126 break;
127 case STATUS_CABLE_NONE:
128 cable = "no";
129 break;
130 default:
131 cable = "invalid";
132 }
133
134 switch ((value >> STATUS_CABLE_PM_SHIFT) & 0x7) {
135 case STATUS_CABLE_V35:
136 pm = "V.35";
137 break;
138 case STATUS_CABLE_X21:
139 pm = "X.21";
140 break;
141 case STATUS_CABLE_V24:
142 pm = "V.24";
143 break;
144 case STATUS_CABLE_EIA530:
145 pm = "EIA530";
146 break;
147 case STATUS_CABLE_NONE:
148 pm = "no personality";
149 valid = 0;
150 break;
151 default:
152 pm = "invalid personality";
153 valid = 0;
154 }
155
156 if (valid) {
157 if ((value & 7) == ((value >> STATUS_CABLE_PM_SHIFT) & 7)) {
158 dsr = (value & STATUS_CABLE_DSR) ? ", DSR ON" :
159 ", DSR off";
160 dcd = (value & STATUS_CABLE_DCD) ? ", carrier ON" :
161 ", carrier off";
162 }
163 dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE";
164 }
165 netdev_info(port->dev, "%s%s module, %s cable%s%s\n",
166 pm, dte, cable, dsr, dcd);
167
168 if (value & STATUS_CABLE_DCD)
169 netif_carrier_on(port->dev);
170 else
171 netif_carrier_off(port->dev);
172 }
173
174 /* Transmit complete interrupt service */
wanxl_tx_intr(struct port * port)175 static inline void wanxl_tx_intr(struct port *port)
176 {
177 struct net_device *dev = port->dev;
178
179 while (1) {
180 desc_t *desc = &get_status(port)->tx_descs[port->tx_in];
181 struct sk_buff *skb = port->tx_skbs[port->tx_in];
182
183 switch (desc->stat) {
184 case PACKET_FULL:
185 case PACKET_EMPTY:
186 netif_wake_queue(dev);
187 return;
188
189 case PACKET_UNDERRUN:
190 dev->stats.tx_errors++;
191 dev->stats.tx_fifo_errors++;
192 break;
193
194 default:
195 dev->stats.tx_packets++;
196 dev->stats.tx_bytes += skb->len;
197 }
198 desc->stat = PACKET_EMPTY; /* Free descriptor */
199 dma_unmap_single(&port->card->pdev->dev, desc->address,
200 skb->len, DMA_TO_DEVICE);
201 dev_consume_skb_irq(skb);
202 port->tx_in = (port->tx_in + 1) % TX_BUFFERS;
203 }
204 }
205
206 /* Receive complete interrupt service */
wanxl_rx_intr(struct card * card)207 static inline void wanxl_rx_intr(struct card *card)
208 {
209 desc_t *desc;
210
211 while (desc = &card->status->rx_descs[card->rx_in],
212 desc->stat != PACKET_EMPTY) {
213 if ((desc->stat & PACKET_PORT_MASK) > card->n_ports) {
214 pr_crit("%s: received packet for nonexistent port\n",
215 pci_name(card->pdev));
216 } else {
217 struct sk_buff *skb = card->rx_skbs[card->rx_in];
218 struct port *port = &card->ports[desc->stat &
219 PACKET_PORT_MASK];
220 struct net_device *dev = port->dev;
221
222 if (!skb) {
223 dev->stats.rx_dropped++;
224 } else {
225 dma_unmap_single(&card->pdev->dev,
226 desc->address, BUFFER_LENGTH,
227 DMA_FROM_DEVICE);
228 skb_put(skb, desc->length);
229
230 #ifdef DEBUG_PKT
231 printk(KERN_DEBUG "%s RX(%i):", dev->name,
232 skb->len);
233 debug_frame(skb);
234 #endif
235 dev->stats.rx_packets++;
236 dev->stats.rx_bytes += skb->len;
237 skb->protocol = hdlc_type_trans(skb, dev);
238 netif_rx(skb);
239 skb = NULL;
240 }
241
242 if (!skb) {
243 skb = dev_alloc_skb(BUFFER_LENGTH);
244 desc->address = skb ?
245 dma_map_single(&card->pdev->dev,
246 skb->data,
247 BUFFER_LENGTH,
248 DMA_FROM_DEVICE) : 0;
249 card->rx_skbs[card->rx_in] = skb;
250 }
251 }
252 desc->stat = PACKET_EMPTY; /* Free descriptor */
253 card->rx_in = (card->rx_in + 1) % RX_QUEUE_LENGTH;
254 }
255 }
256
wanxl_intr(int irq,void * dev_id)257 static irqreturn_t wanxl_intr(int irq, void *dev_id)
258 {
259 struct card *card = dev_id;
260 int i;
261 u32 stat;
262 int handled = 0;
263
264 while ((stat = readl(card->plx + PLX_DOORBELL_FROM_CARD)) != 0) {
265 handled = 1;
266 writel(stat, card->plx + PLX_DOORBELL_FROM_CARD);
267
268 for (i = 0; i < card->n_ports; i++) {
269 if (stat & (1 << (DOORBELL_FROM_CARD_TX_0 + i)))
270 wanxl_tx_intr(&card->ports[i]);
271 if (stat & (1 << (DOORBELL_FROM_CARD_CABLE_0 + i)))
272 wanxl_cable_intr(&card->ports[i]);
273 }
274 if (stat & (1 << DOORBELL_FROM_CARD_RX))
275 wanxl_rx_intr(card);
276 }
277
278 return IRQ_RETVAL(handled);
279 }
280
wanxl_xmit(struct sk_buff * skb,struct net_device * dev)281 static netdev_tx_t wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
282 {
283 struct port *port = dev_to_port(dev);
284 desc_t *desc;
285
286 spin_lock(&port->lock);
287
288 desc = &get_status(port)->tx_descs[port->tx_out];
289 if (desc->stat != PACKET_EMPTY) {
290 /* should never happen - previous xmit should stop queue */
291 #ifdef DEBUG_PKT
292 printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
293 #endif
294 netif_stop_queue(dev);
295 spin_unlock(&port->lock);
296 return NETDEV_TX_BUSY; /* request packet to be queued */
297 }
298
299 #ifdef DEBUG_PKT
300 printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
301 debug_frame(skb);
302 #endif
303
304 port->tx_skbs[port->tx_out] = skb;
305 desc->address = dma_map_single(&port->card->pdev->dev, skb->data,
306 skb->len, DMA_TO_DEVICE);
307 desc->length = skb->len;
308 desc->stat = PACKET_FULL;
309 writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node),
310 port->card->plx + PLX_DOORBELL_TO_CARD);
311
312 port->tx_out = (port->tx_out + 1) % TX_BUFFERS;
313
314 if (get_status(port)->tx_descs[port->tx_out].stat != PACKET_EMPTY) {
315 netif_stop_queue(dev);
316 #ifdef DEBUG_PKT
317 printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
318 #endif
319 }
320
321 spin_unlock(&port->lock);
322 return NETDEV_TX_OK;
323 }
324
wanxl_attach(struct net_device * dev,unsigned short encoding,unsigned short parity)325 static int wanxl_attach(struct net_device *dev, unsigned short encoding,
326 unsigned short parity)
327 {
328 struct port *port = dev_to_port(dev);
329
330 if (encoding != ENCODING_NRZ &&
331 encoding != ENCODING_NRZI)
332 return -EINVAL;
333
334 if (parity != PARITY_NONE &&
335 parity != PARITY_CRC32_PR1_CCITT &&
336 parity != PARITY_CRC16_PR1_CCITT &&
337 parity != PARITY_CRC32_PR0_CCITT &&
338 parity != PARITY_CRC16_PR0_CCITT)
339 return -EINVAL;
340
341 get_status(port)->encoding = encoding;
342 get_status(port)->parity = parity;
343 return 0;
344 }
345
wanxl_ioctl(struct net_device * dev,struct if_settings * ifs)346 static int wanxl_ioctl(struct net_device *dev, struct if_settings *ifs)
347 {
348 const size_t size = sizeof(sync_serial_settings);
349 sync_serial_settings line;
350 struct port *port = dev_to_port(dev);
351
352 switch (ifs->type) {
353 case IF_GET_IFACE:
354 ifs->type = IF_IFACE_SYNC_SERIAL;
355 if (ifs->size < size) {
356 ifs->size = size; /* data size wanted */
357 return -ENOBUFS;
358 }
359 memset(&line, 0, sizeof(line));
360 line.clock_type = get_status(port)->clocking;
361 line.clock_rate = 0;
362 line.loopback = 0;
363
364 if (copy_to_user(ifs->ifs_ifsu.sync, &line, size))
365 return -EFAULT;
366 return 0;
367
368 case IF_IFACE_SYNC_SERIAL:
369 if (!capable(CAP_NET_ADMIN))
370 return -EPERM;
371 if (dev->flags & IFF_UP)
372 return -EBUSY;
373
374 if (copy_from_user(&line, ifs->ifs_ifsu.sync,
375 size))
376 return -EFAULT;
377
378 if (line.clock_type != CLOCK_EXT &&
379 line.clock_type != CLOCK_TXFROMRX)
380 return -EINVAL; /* No such clock setting */
381
382 if (line.loopback != 0)
383 return -EINVAL;
384
385 get_status(port)->clocking = line.clock_type;
386 return 0;
387
388 default:
389 return hdlc_ioctl(dev, ifs);
390 }
391 }
392
wanxl_open(struct net_device * dev)393 static int wanxl_open(struct net_device *dev)
394 {
395 struct port *port = dev_to_port(dev);
396 u8 __iomem *dbr = port->card->plx + PLX_DOORBELL_TO_CARD;
397 unsigned long timeout;
398 int i;
399
400 if (get_status(port)->open) {
401 netdev_err(dev, "port already open\n");
402 return -EIO;
403 }
404
405 i = hdlc_open(dev);
406 if (i)
407 return i;
408
409 port->tx_in = port->tx_out = 0;
410 for (i = 0; i < TX_BUFFERS; i++)
411 get_status(port)->tx_descs[i].stat = PACKET_EMPTY;
412 /* signal the card */
413 writel(1 << (DOORBELL_TO_CARD_OPEN_0 + port->node), dbr);
414
415 timeout = jiffies + HZ;
416 do {
417 if (get_status(port)->open) {
418 netif_start_queue(dev);
419 return 0;
420 }
421 } while (time_after(timeout, jiffies));
422
423 netdev_err(dev, "unable to open port\n");
424 /* ask the card to close the port, should it be still alive */
425 writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr);
426 return -EFAULT;
427 }
428
wanxl_close(struct net_device * dev)429 static int wanxl_close(struct net_device *dev)
430 {
431 struct port *port = dev_to_port(dev);
432 unsigned long timeout;
433 int i;
434
435 hdlc_close(dev);
436 /* signal the card */
437 writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node),
438 port->card->plx + PLX_DOORBELL_TO_CARD);
439
440 timeout = jiffies + HZ;
441 do {
442 if (!get_status(port)->open)
443 break;
444 } while (time_after(timeout, jiffies));
445
446 if (get_status(port)->open)
447 netdev_err(dev, "unable to close port\n");
448
449 netif_stop_queue(dev);
450
451 for (i = 0; i < TX_BUFFERS; i++) {
452 desc_t *desc = &get_status(port)->tx_descs[i];
453
454 if (desc->stat != PACKET_EMPTY) {
455 desc->stat = PACKET_EMPTY;
456 dma_unmap_single(&port->card->pdev->dev,
457 desc->address, port->tx_skbs[i]->len,
458 DMA_TO_DEVICE);
459 dev_kfree_skb(port->tx_skbs[i]);
460 }
461 }
462 return 0;
463 }
464
wanxl_get_stats(struct net_device * dev)465 static struct net_device_stats *wanxl_get_stats(struct net_device *dev)
466 {
467 struct port *port = dev_to_port(dev);
468
469 dev->stats.rx_over_errors = get_status(port)->rx_overruns;
470 dev->stats.rx_frame_errors = get_status(port)->rx_frame_errors;
471 dev->stats.rx_errors = dev->stats.rx_over_errors +
472 dev->stats.rx_frame_errors;
473 return &dev->stats;
474 }
475
wanxl_puts_command(struct card * card,u32 cmd)476 static int wanxl_puts_command(struct card *card, u32 cmd)
477 {
478 unsigned long timeout = jiffies + 5 * HZ;
479
480 writel(cmd, card->plx + PLX_MAILBOX_1);
481 do {
482 if (readl(card->plx + PLX_MAILBOX_1) == 0)
483 return 0;
484
485 schedule();
486 } while (time_after(timeout, jiffies));
487
488 return -1;
489 }
490
wanxl_reset(struct card * card)491 static void wanxl_reset(struct card *card)
492 {
493 u32 old_value = readl(card->plx + PLX_CONTROL) & ~PLX_CTL_RESET;
494
495 writel(0x80, card->plx + PLX_MAILBOX_0);
496 writel(old_value | PLX_CTL_RESET, card->plx + PLX_CONTROL);
497 readl(card->plx + PLX_CONTROL); /* wait for posted write */
498 udelay(1);
499 writel(old_value, card->plx + PLX_CONTROL);
500 readl(card->plx + PLX_CONTROL); /* wait for posted write */
501 }
502
wanxl_pci_remove_one(struct pci_dev * pdev)503 static void wanxl_pci_remove_one(struct pci_dev *pdev)
504 {
505 struct card *card = pci_get_drvdata(pdev);
506 int i;
507
508 for (i = 0; i < card->n_ports; i++) {
509 unregister_hdlc_device(card->ports[i].dev);
510 free_netdev(card->ports[i].dev);
511 }
512
513 /* unregister and free all host resources */
514 if (card->irq)
515 free_irq(card->irq, card);
516
517 wanxl_reset(card);
518
519 for (i = 0; i < RX_QUEUE_LENGTH; i++)
520 if (card->rx_skbs[i]) {
521 dma_unmap_single(&card->pdev->dev,
522 card->status->rx_descs[i].address,
523 BUFFER_LENGTH, DMA_FROM_DEVICE);
524 dev_kfree_skb(card->rx_skbs[i]);
525 }
526
527 if (card->plx)
528 iounmap(card->plx);
529
530 if (card->status)
531 dma_free_coherent(&pdev->dev, sizeof(struct card_status),
532 card->status, card->status_address);
533
534 pci_release_regions(pdev);
535 pci_disable_device(pdev);
536 kfree(card);
537 }
538
539 #include "wanxlfw.inc"
540
541 static const struct net_device_ops wanxl_ops = {
542 .ndo_open = wanxl_open,
543 .ndo_stop = wanxl_close,
544 .ndo_start_xmit = hdlc_start_xmit,
545 .ndo_siocwandev = wanxl_ioctl,
546 .ndo_get_stats = wanxl_get_stats,
547 };
548
wanxl_pci_init_one(struct pci_dev * pdev,const struct pci_device_id * ent)549 static int wanxl_pci_init_one(struct pci_dev *pdev,
550 const struct pci_device_id *ent)
551 {
552 struct card *card;
553 u32 ramsize, stat;
554 unsigned long timeout;
555 u32 plx_phy; /* PLX PCI base address */
556 u32 mem_phy; /* memory PCI base addr */
557 u8 __iomem *mem; /* memory virtual base addr */
558 int i, ports;
559
560 #ifndef MODULE
561 pr_info_once("%s\n", version);
562 #endif
563
564 i = pci_enable_device(pdev);
565 if (i)
566 return i;
567
568 /* QUICC can only access first 256 MB of host RAM directly,
569 * but PLX9060 DMA does 32-bits for actual packet data transfers
570 */
571
572 /* FIXME when PCI/DMA subsystems are fixed.
573 * We set both dma_mask and consistent_dma_mask to 28 bits
574 * and pray pci_alloc_consistent() will use this info. It should
575 * work on most platforms
576 */
577 if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(28)) ||
578 dma_set_mask(&pdev->dev, DMA_BIT_MASK(28))) {
579 pr_err("No usable DMA configuration\n");
580 pci_disable_device(pdev);
581 return -EIO;
582 }
583
584 i = pci_request_regions(pdev, "wanXL");
585 if (i) {
586 pci_disable_device(pdev);
587 return i;
588 }
589
590 switch (pdev->device) {
591 case PCI_DEVICE_ID_SBE_WANXL100:
592 ports = 1;
593 break;
594 case PCI_DEVICE_ID_SBE_WANXL200:
595 ports = 2;
596 break;
597 default:
598 ports = 4;
599 }
600
601 card = kzalloc(struct_size(card, ports, ports), GFP_KERNEL);
602 if (!card) {
603 pci_release_regions(pdev);
604 pci_disable_device(pdev);
605 return -ENOBUFS;
606 }
607
608 pci_set_drvdata(pdev, card);
609 card->pdev = pdev;
610
611 card->status = dma_alloc_coherent(&pdev->dev,
612 sizeof(struct card_status),
613 &card->status_address, GFP_KERNEL);
614 if (!card->status) {
615 wanxl_pci_remove_one(pdev);
616 return -ENOBUFS;
617 }
618
619 #ifdef DEBUG_PCI
620 printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory"
621 " at 0x%LX\n", pci_name(pdev),
622 (unsigned long long)card->status_address);
623 #endif
624
625 /* FIXME when PCI/DMA subsystems are fixed.
626 * We set both dma_mask and consistent_dma_mask back to 32 bits
627 * to indicate the card can do 32-bit DMA addressing
628 */
629 if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)) ||
630 dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
631 pr_err("No usable DMA configuration\n");
632 wanxl_pci_remove_one(pdev);
633 return -EIO;
634 }
635
636 /* set up PLX mapping */
637 plx_phy = pci_resource_start(pdev, 0);
638
639 card->plx = ioremap(plx_phy, 0x70);
640 if (!card->plx) {
641 pr_err("ioremap() failed\n");
642 wanxl_pci_remove_one(pdev);
643 return -EFAULT;
644 }
645
646 #if RESET_WHILE_LOADING
647 wanxl_reset(card);
648 #endif
649
650 timeout = jiffies + 20 * HZ;
651 while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) {
652 if (time_before(timeout, jiffies)) {
653 pr_warn("%s: timeout waiting for PUTS to complete\n",
654 pci_name(pdev));
655 wanxl_pci_remove_one(pdev);
656 return -ENODEV;
657 }
658
659 switch (stat & 0xC0) {
660 case 0x00: /* hmm - PUTS completed with non-zero code? */
661 case 0x80: /* PUTS still testing the hardware */
662 break;
663
664 default:
665 pr_warn("%s: PUTS test 0x%X failed\n",
666 pci_name(pdev), stat & 0x30);
667 wanxl_pci_remove_one(pdev);
668 return -ENODEV;
669 }
670
671 schedule();
672 }
673
674 /* get on-board memory size (PUTS detects no more than 4 MB) */
675 ramsize = readl(card->plx + PLX_MAILBOX_2) & MBX2_MEMSZ_MASK;
676
677 /* set up on-board RAM mapping */
678 mem_phy = pci_resource_start(pdev, 2);
679
680 /* sanity check the board's reported memory size */
681 if (ramsize < BUFFERS_ADDR +
682 (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) {
683 pr_warn("%s: no enough on-board RAM (%u bytes detected, %u bytes required)\n",
684 pci_name(pdev), ramsize,
685 BUFFERS_ADDR +
686 (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
687 wanxl_pci_remove_one(pdev);
688 return -ENODEV;
689 }
690
691 if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) {
692 pr_warn("%s: unable to Set Byte Swap Mode\n", pci_name(pdev));
693 wanxl_pci_remove_one(pdev);
694 return -ENODEV;
695 }
696
697 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
698 struct sk_buff *skb = dev_alloc_skb(BUFFER_LENGTH);
699
700 card->rx_skbs[i] = skb;
701 if (skb)
702 card->status->rx_descs[i].address =
703 dma_map_single(&card->pdev->dev, skb->data,
704 BUFFER_LENGTH, DMA_FROM_DEVICE);
705 }
706
707 mem = ioremap(mem_phy, PDM_OFFSET + sizeof(firmware));
708 if (!mem) {
709 pr_err("ioremap() failed\n");
710 wanxl_pci_remove_one(pdev);
711 return -EFAULT;
712 }
713
714 for (i = 0; i < sizeof(firmware); i += 4)
715 writel(ntohl(*(__be32 *)(firmware + i)), mem + PDM_OFFSET + i);
716
717 for (i = 0; i < ports; i++)
718 writel(card->status_address +
719 (void *)&card->status->port_status[i] -
720 (void *)card->status, mem + PDM_OFFSET + 4 + i * 4);
721 writel(card->status_address, mem + PDM_OFFSET + 20);
722 writel(PDM_OFFSET, mem);
723 iounmap(mem);
724
725 writel(0, card->plx + PLX_MAILBOX_5);
726
727 if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) {
728 pr_warn("%s: unable to Abort and Jump\n", pci_name(pdev));
729 wanxl_pci_remove_one(pdev);
730 return -ENODEV;
731 }
732
733 timeout = jiffies + 5 * HZ;
734 do {
735 stat = readl(card->plx + PLX_MAILBOX_5);
736 if (stat)
737 break;
738 schedule();
739 } while (time_after(timeout, jiffies));
740
741 if (!stat) {
742 pr_warn("%s: timeout while initializing card firmware\n",
743 pci_name(pdev));
744 wanxl_pci_remove_one(pdev);
745 return -ENODEV;
746 }
747
748 #if DETECT_RAM
749 ramsize = stat;
750 #endif
751
752 pr_info("%s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
753 pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
754
755 /* Allocate IRQ */
756 if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) {
757 pr_warn("%s: could not allocate IRQ%i\n",
758 pci_name(pdev), pdev->irq);
759 wanxl_pci_remove_one(pdev);
760 return -EBUSY;
761 }
762 card->irq = pdev->irq;
763
764 for (i = 0; i < ports; i++) {
765 hdlc_device *hdlc;
766 struct port *port = &card->ports[i];
767 struct net_device *dev = alloc_hdlcdev(port);
768
769 if (!dev) {
770 pr_err("%s: unable to allocate memory\n",
771 pci_name(pdev));
772 wanxl_pci_remove_one(pdev);
773 return -ENOMEM;
774 }
775
776 port->dev = dev;
777 hdlc = dev_to_hdlc(dev);
778 spin_lock_init(&port->lock);
779 dev->tx_queue_len = 50;
780 dev->netdev_ops = &wanxl_ops;
781 hdlc->attach = wanxl_attach;
782 hdlc->xmit = wanxl_xmit;
783 port->card = card;
784 port->node = i;
785 get_status(port)->clocking = CLOCK_EXT;
786 if (register_hdlc_device(dev)) {
787 pr_err("%s: unable to register hdlc device\n",
788 pci_name(pdev));
789 free_netdev(dev);
790 wanxl_pci_remove_one(pdev);
791 return -ENOBUFS;
792 }
793 card->n_ports++;
794 }
795
796 pr_info("%s: port", pci_name(pdev));
797 for (i = 0; i < ports; i++)
798 pr_cont("%s #%i: %s",
799 i ? "," : "", i, card->ports[i].dev->name);
800 pr_cont("\n");
801
802 for (i = 0; i < ports; i++)
803 wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/
804
805 return 0;
806 }
807
808 static const struct pci_device_id wanxl_pci_tbl[] = {
809 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID,
810 PCI_ANY_ID, 0, 0, 0 },
811 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID,
812 PCI_ANY_ID, 0, 0, 0 },
813 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL400, PCI_ANY_ID,
814 PCI_ANY_ID, 0, 0, 0 },
815 { 0, }
816 };
817
818 static struct pci_driver wanxl_pci_driver = {
819 .name = "wanXL",
820 .id_table = wanxl_pci_tbl,
821 .probe = wanxl_pci_init_one,
822 .remove = wanxl_pci_remove_one,
823 };
824
wanxl_init_module(void)825 static int __init wanxl_init_module(void)
826 {
827 #ifdef MODULE
828 pr_info("%s\n", version);
829 #endif
830 return pci_register_driver(&wanxl_pci_driver);
831 }
832
wanxl_cleanup_module(void)833 static void __exit wanxl_cleanup_module(void)
834 {
835 pci_unregister_driver(&wanxl_pci_driver);
836 }
837
838 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
839 MODULE_DESCRIPTION("SBE Inc. wanXL serial port driver");
840 MODULE_LICENSE("GPL v2");
841 MODULE_DEVICE_TABLE(pci, wanxl_pci_tbl);
842
843 module_init(wanxl_init_module);
844 module_exit(wanxl_cleanup_module);
845