1 /* SPDX-License-Identifier: BSD-3-Clause-Clear */ 2 /* 3 * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved. 4 * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. 5 */ 6 #include "core.h" 7 8 #ifndef ATH12K_HAL_DESC_H 9 #define ATH12K_HAL_DESC_H 10 11 #define BUFFER_ADDR_INFO0_ADDR GENMASK(31, 0) 12 13 #define BUFFER_ADDR_INFO1_ADDR GENMASK(7, 0) 14 #define BUFFER_ADDR_INFO1_RET_BUF_MGR GENMASK(11, 8) 15 #define BUFFER_ADDR_INFO1_SW_COOKIE GENMASK(31, 12) 16 17 struct ath12k_buffer_addr { 18 __le32 info0; 19 __le32 info1; 20 } __packed; 21 22 /* ath12k_buffer_addr 23 * 24 * buffer_addr_31_0 25 * Address (lower 32 bits) of the MSDU buffer or MSDU_EXTENSION 26 * descriptor or Link descriptor 27 * 28 * buffer_addr_39_32 29 * Address (upper 8 bits) of the MSDU buffer or MSDU_EXTENSION 30 * descriptor or Link descriptor 31 * 32 * return_buffer_manager (RBM) 33 * Consumer: WBM 34 * Producer: SW/FW 35 * Indicates to which buffer manager the buffer or MSDU_EXTENSION 36 * descriptor or link descriptor that is being pointed to shall be 37 * returned after the frame has been processed. It is used by WBM 38 * for routing purposes. 39 * 40 * Values are defined in enum %HAL_RX_BUF_RBM_ 41 * 42 * sw_buffer_cookie 43 * Cookie field exclusively used by SW. HW ignores the contents, 44 * accept that it passes the programmed value on to other 45 * descriptors together with the physical address. 46 * 47 * Field can be used by SW to for example associate the buffers 48 * physical address with the virtual address. 49 * 50 * NOTE1: 51 * The three most significant bits can have a special meaning 52 * in case this struct is embedded in a TX_MPDU_DETAILS STRUCT, 53 * and field transmit_bw_restriction is set 54 * 55 * In case of NON punctured transmission: 56 * Sw_buffer_cookie[19:17] = 3'b000: 20 MHz TX only 57 * Sw_buffer_cookie[19:17] = 3'b001: 40 MHz TX only 58 * Sw_buffer_cookie[19:17] = 3'b010: 80 MHz TX only 59 * Sw_buffer_cookie[19:17] = 3'b011: 160 MHz TX only 60 * Sw_buffer_cookie[19:17] = 3'b101: 240 MHz TX only 61 * Sw_buffer_cookie[19:17] = 3'b100: 320 MHz TX only 62 * Sw_buffer_cookie[19:18] = 2'b11: reserved 63 * 64 * In case of punctured transmission: 65 * Sw_buffer_cookie[19:16] = 4'b0000: pattern 0 only 66 * Sw_buffer_cookie[19:16] = 4'b0001: pattern 1 only 67 * Sw_buffer_cookie[19:16] = 4'b0010: pattern 2 only 68 * Sw_buffer_cookie[19:16] = 4'b0011: pattern 3 only 69 * Sw_buffer_cookie[19:16] = 4'b0100: pattern 4 only 70 * Sw_buffer_cookie[19:16] = 4'b0101: pattern 5 only 71 * Sw_buffer_cookie[19:16] = 4'b0110: pattern 6 only 72 * Sw_buffer_cookie[19:16] = 4'b0111: pattern 7 only 73 * Sw_buffer_cookie[19:16] = 4'b1000: pattern 8 only 74 * Sw_buffer_cookie[19:16] = 4'b1001: pattern 9 only 75 * Sw_buffer_cookie[19:16] = 4'b1010: pattern 10 only 76 * Sw_buffer_cookie[19:16] = 4'b1011: pattern 11 only 77 * Sw_buffer_cookie[19:18] = 2'b11: reserved 78 * 79 * Note: a punctured transmission is indicated by the presence 80 * of TLV TX_PUNCTURE_SETUP embedded in the scheduler TLV 81 * 82 * Sw_buffer_cookie[20:17]: Tid: The TID field in the QoS control 83 * field 84 * 85 * Sw_buffer_cookie[16]: Mpdu_qos_control_valid: This field 86 * indicates MPDUs with a QoS control field. 87 * 88 */ 89 90 enum hal_tlv_tag { 91 HAL_MACTX_CBF_START = 0 /* 0x0 */, 92 HAL_PHYRX_DATA = 1 /* 0x1 */, 93 HAL_PHYRX_CBF_DATA_RESP = 2 /* 0x2 */, 94 HAL_PHYRX_ABORT_REQUEST = 3 /* 0x3 */, 95 HAL_PHYRX_USER_ABORT_NOTIFICATION = 4 /* 0x4 */, 96 HAL_MACTX_DATA_RESP = 5 /* 0x5 */, 97 HAL_MACTX_CBF_DATA = 6 /* 0x6 */, 98 HAL_MACTX_CBF_DONE = 7 /* 0x7 */, 99 HAL_PHYRX_LMR_DATA_RESP = 8 /* 0x8 */, 100 HAL_RXPCU_TO_UCODE_START = 9 /* 0x9 */, 101 HAL_RXPCU_TO_UCODE_DELIMITER_FOR_FULL_MPDU = 10 /* 0xa */, 102 HAL_RXPCU_TO_UCODE_FULL_MPDU_DATA = 11 /* 0xb */, 103 HAL_RXPCU_TO_UCODE_FCS_STATUS = 12 /* 0xc */, 104 HAL_RXPCU_TO_UCODE_MPDU_DELIMITER = 13 /* 0xd */, 105 HAL_RXPCU_TO_UCODE_DELIMITER_FOR_MPDU_HEADER = 14 /* 0xe */, 106 HAL_RXPCU_TO_UCODE_MPDU_HEADER_DATA = 15 /* 0xf */, 107 HAL_RXPCU_TO_UCODE_END = 16 /* 0x10 */, 108 HAL_MACRX_CBF_READ_REQUEST = 32 /* 0x20 */, 109 HAL_MACRX_CBF_DATA_REQUEST = 33 /* 0x21 */, 110 HAL_MACRXXPECT_NDP_RECEPTION = 34 /* 0x22 */, 111 HAL_MACRX_FREEZE_CAPTURE_CHANNEL = 35 /* 0x23 */, 112 HAL_MACRX_NDP_TIMEOUT = 36 /* 0x24 */, 113 HAL_MACRX_ABORT_ACK = 37 /* 0x25 */, 114 HAL_MACRX_REQ_IMPLICIT_FB = 38 /* 0x26 */, 115 HAL_MACRX_CHAIN_MASK = 39 /* 0x27 */, 116 HAL_MACRX_NAP_USER = 40 /* 0x28 */, 117 HAL_MACRX_ABORT_REQUEST = 41 /* 0x29 */, 118 HAL_PHYTX_OTHER_TRANSMIT_INFO16 = 42 /* 0x2a */, 119 HAL_PHYTX_ABORT_ACK = 43 /* 0x2b */, 120 HAL_PHYTX_ABORT_REQUEST = 44 /* 0x2c */, 121 HAL_PHYTX_PKT_END = 45 /* 0x2d */, 122 HAL_PHYTX_PPDU_HEADER_INFO_REQUEST = 46 /* 0x2e */, 123 HAL_PHYTX_REQUEST_CTRL_INFO = 47 /* 0x2f */, 124 HAL_PHYTX_DATA_REQUEST = 48 /* 0x30 */, 125 HAL_PHYTX_BF_CV_LOADING_DONE = 49 /* 0x31 */, 126 HAL_PHYTX_NAP_ACK = 50 /* 0x32 */, 127 HAL_PHYTX_NAP_DONE = 51 /* 0x33 */, 128 HAL_PHYTX_OFF_ACK = 52 /* 0x34 */, 129 HAL_PHYTX_ON_ACK = 53 /* 0x35 */, 130 HAL_PHYTX_SYNTH_OFF_ACK = 54 /* 0x36 */, 131 HAL_PHYTX_DEBUG16 = 55 /* 0x37 */, 132 HAL_MACTX_ABORT_REQUEST = 56 /* 0x38 */, 133 HAL_MACTX_ABORT_ACK = 57 /* 0x39 */, 134 HAL_MACTX_PKT_END = 58 /* 0x3a */, 135 HAL_MACTX_PRE_PHY_DESC = 59 /* 0x3b */, 136 HAL_MACTX_BF_PARAMS_COMMON = 60 /* 0x3c */, 137 HAL_MACTX_BF_PARAMS_PER_USER = 61 /* 0x3d */, 138 HAL_MACTX_PREFETCH_CV = 62 /* 0x3e */, 139 HAL_MACTX_USER_DESC_COMMON = 63 /* 0x3f */, 140 HAL_MACTX_USER_DESC_PER_USER = 64 /* 0x40 */, 141 HAL_XAMPLE_USER_TLV_16 = 65 /* 0x41 */, 142 HAL_XAMPLE_TLV_16 = 66 /* 0x42 */, 143 HAL_MACTX_PHY_OFF = 67 /* 0x43 */, 144 HAL_MACTX_PHY_ON = 68 /* 0x44 */, 145 HAL_MACTX_SYNTH_OFF = 69 /* 0x45 */, 146 HAL_MACTXXPECT_CBF_COMMON = 70 /* 0x46 */, 147 HAL_MACTXXPECT_CBF_PER_USER = 71 /* 0x47 */, 148 HAL_MACTX_PHY_DESC = 72 /* 0x48 */, 149 HAL_MACTX_L_SIG_A = 73 /* 0x49 */, 150 HAL_MACTX_L_SIG_B = 74 /* 0x4a */, 151 HAL_MACTX_HT_SIG = 75 /* 0x4b */, 152 HAL_MACTX_VHT_SIG_A = 76 /* 0x4c */, 153 HAL_MACTX_VHT_SIG_B_SU20 = 77 /* 0x4d */, 154 HAL_MACTX_VHT_SIG_B_SU40 = 78 /* 0x4e */, 155 HAL_MACTX_VHT_SIG_B_SU80 = 79 /* 0x4f */, 156 HAL_MACTX_VHT_SIG_B_SU160 = 80 /* 0x50 */, 157 HAL_MACTX_VHT_SIG_B_MU20 = 81 /* 0x51 */, 158 HAL_MACTX_VHT_SIG_B_MU40 = 82 /* 0x52 */, 159 HAL_MACTX_VHT_SIG_B_MU80 = 83 /* 0x53 */, 160 HAL_MACTX_VHT_SIG_B_MU160 = 84 /* 0x54 */, 161 HAL_MACTX_SERVICE = 85 /* 0x55 */, 162 HAL_MACTX_HE_SIG_A_SU = 86 /* 0x56 */, 163 HAL_MACTX_HE_SIG_A_MU_DL = 87 /* 0x57 */, 164 HAL_MACTX_HE_SIG_A_MU_UL = 88 /* 0x58 */, 165 HAL_MACTX_HE_SIG_B1_MU = 89 /* 0x59 */, 166 HAL_MACTX_HE_SIG_B2_MU = 90 /* 0x5a */, 167 HAL_MACTX_HE_SIG_B2_OFDMA = 91 /* 0x5b */, 168 HAL_MACTX_DELETE_CV = 92 /* 0x5c */, 169 HAL_MACTX_MU_UPLINK_COMMON = 93 /* 0x5d */, 170 HAL_MACTX_MU_UPLINK_USER_SETUP = 94 /* 0x5e */, 171 HAL_MACTX_OTHER_TRANSMIT_INFO = 95 /* 0x5f */, 172 HAL_MACTX_PHY_NAP = 96 /* 0x60 */, 173 HAL_MACTX_DEBUG = 97 /* 0x61 */, 174 HAL_PHYRX_ABORT_ACK = 98 /* 0x62 */, 175 HAL_PHYRX_GENERATED_CBF_DETAILS = 99 /* 0x63 */, 176 HAL_PHYRX_RSSI_LEGACY = 100 /* 0x64 */, 177 HAL_PHYRX_RSSI_HT = 101 /* 0x65 */, 178 HAL_PHYRX_USER_INFO = 102 /* 0x66 */, 179 HAL_PHYRX_PKT_END = 103 /* 0x67 */, 180 HAL_PHYRX_DEBUG = 104 /* 0x68 */, 181 HAL_PHYRX_CBF_TRANSFER_DONE = 105 /* 0x69 */, 182 HAL_PHYRX_CBF_TRANSFER_ABORT = 106 /* 0x6a */, 183 HAL_PHYRX_L_SIG_A = 107 /* 0x6b */, 184 HAL_PHYRX_L_SIG_B = 108 /* 0x6c */, 185 HAL_PHYRX_HT_SIG = 109 /* 0x6d */, 186 HAL_PHYRX_VHT_SIG_A = 110 /* 0x6e */, 187 HAL_PHYRX_VHT_SIG_B_SU20 = 111 /* 0x6f */, 188 HAL_PHYRX_VHT_SIG_B_SU40 = 112 /* 0x70 */, 189 HAL_PHYRX_VHT_SIG_B_SU80 = 113 /* 0x71 */, 190 HAL_PHYRX_VHT_SIG_B_SU160 = 114 /* 0x72 */, 191 HAL_PHYRX_VHT_SIG_B_MU20 = 115 /* 0x73 */, 192 HAL_PHYRX_VHT_SIG_B_MU40 = 116 /* 0x74 */, 193 HAL_PHYRX_VHT_SIG_B_MU80 = 117 /* 0x75 */, 194 HAL_PHYRX_VHT_SIG_B_MU160 = 118 /* 0x76 */, 195 HAL_PHYRX_HE_SIG_A_SU = 119 /* 0x77 */, 196 HAL_PHYRX_HE_SIG_A_MU_DL = 120 /* 0x78 */, 197 HAL_PHYRX_HE_SIG_A_MU_UL = 121 /* 0x79 */, 198 HAL_PHYRX_HE_SIG_B1_MU = 122 /* 0x7a */, 199 HAL_PHYRX_HE_SIG_B2_MU = 123 /* 0x7b */, 200 HAL_PHYRX_HE_SIG_B2_OFDMA = 124 /* 0x7c */, 201 HAL_PHYRX_OTHER_RECEIVE_INFO = 125 /* 0x7d */, 202 HAL_PHYRX_COMMON_USER_INFO = 126 /* 0x7e */, 203 HAL_PHYRX_DATA_DONE = 127 /* 0x7f */, 204 HAL_COEX_TX_REQ = 128 /* 0x80 */, 205 HAL_DUMMY = 129 /* 0x81 */, 206 HALXAMPLE_TLV_32_NAME = 130 /* 0x82 */, 207 HAL_MPDU_LIMIT = 131 /* 0x83 */, 208 HAL_NA_LENGTH_END = 132 /* 0x84 */, 209 HAL_OLE_BUF_STATUS = 133 /* 0x85 */, 210 HAL_PCU_PPDU_SETUP_DONE = 134 /* 0x86 */, 211 HAL_PCU_PPDU_SETUP_END = 135 /* 0x87 */, 212 HAL_PCU_PPDU_SETUP_INIT = 136 /* 0x88 */, 213 HAL_PCU_PPDU_SETUP_START = 137 /* 0x89 */, 214 HAL_PDG_FES_SETUP = 138 /* 0x8a */, 215 HAL_PDG_RESPONSE = 139 /* 0x8b */, 216 HAL_PDG_TX_REQ = 140 /* 0x8c */, 217 HAL_SCH_WAIT_INSTR = 141 /* 0x8d */, 218 HAL_TQM_FLOWMPTY_STATUS = 143 /* 0x8f */, 219 HAL_TQM_FLOW_NOTMPTY_STATUS = 144 /* 0x90 */, 220 HAL_TQM_GEN_MPDU_LENGTH_LIST = 145 /* 0x91 */, 221 HAL_TQM_GEN_MPDU_LENGTH_LIST_STATUS = 146 /* 0x92 */, 222 HAL_TQM_GEN_MPDUS = 147 /* 0x93 */, 223 HAL_TQM_GEN_MPDUS_STATUS = 148 /* 0x94 */, 224 HAL_TQM_REMOVE_MPDU = 149 /* 0x95 */, 225 HAL_TQM_REMOVE_MPDU_STATUS = 150 /* 0x96 */, 226 HAL_TQM_REMOVE_MSDU = 151 /* 0x97 */, 227 HAL_TQM_REMOVE_MSDU_STATUS = 152 /* 0x98 */, 228 HAL_TQM_UPDATE_TX_MPDU_COUNT = 153 /* 0x99 */, 229 HAL_TQM_WRITE_CMD = 154 /* 0x9a */, 230 HAL_OFDMA_TRIGGER_DETAILS = 155 /* 0x9b */, 231 HAL_TX_DATA = 156 /* 0x9c */, 232 HAL_TX_FES_SETUP = 157 /* 0x9d */, 233 HAL_RX_PACKET = 158 /* 0x9e */, 234 HALXPECTED_RESPONSE = 159 /* 0x9f */, 235 HAL_TX_MPDU_END = 160 /* 0xa0 */, 236 HAL_TX_MPDU_START = 161 /* 0xa1 */, 237 HAL_TX_MSDU_END = 162 /* 0xa2 */, 238 HAL_TX_MSDU_START = 163 /* 0xa3 */, 239 HAL_TX_SW_MODE_SETUP = 164 /* 0xa4 */, 240 HAL_TXPCU_BUFFER_STATUS = 165 /* 0xa5 */, 241 HAL_TXPCU_USER_BUFFER_STATUS = 166 /* 0xa6 */, 242 HAL_DATA_TO_TIME_CONFIG = 167 /* 0xa7 */, 243 HALXAMPLE_USER_TLV_32 = 168 /* 0xa8 */, 244 HAL_MPDU_INFO = 169 /* 0xa9 */, 245 HAL_PDG_USER_SETUP = 170 /* 0xaa */, 246 HAL_TX_11AH_SETUP = 171 /* 0xab */, 247 HAL_REO_UPDATE_RX_REO_QUEUE_STATUS = 172 /* 0xac */, 248 HAL_TX_PEER_ENTRY = 173 /* 0xad */, 249 HAL_TX_RAW_OR_NATIVE_FRAME_SETUP = 174 /* 0xae */, 250 HALXAMPLE_USER_TLV_44 = 175 /* 0xaf */, 251 HAL_TX_FLUSH = 176 /* 0xb0 */, 252 HAL_TX_FLUSH_REQ = 177 /* 0xb1 */, 253 HAL_TQM_WRITE_CMD_STATUS = 178 /* 0xb2 */, 254 HAL_TQM_GET_MPDU_QUEUE_STATS = 179 /* 0xb3 */, 255 HAL_TQM_GET_MSDU_FLOW_STATS = 180 /* 0xb4 */, 256 HALXAMPLE_USER_CTLV_44 = 181 /* 0xb5 */, 257 HAL_TX_FES_STATUS_START = 182 /* 0xb6 */, 258 HAL_TX_FES_STATUS_USER_PPDU = 183 /* 0xb7 */, 259 HAL_TX_FES_STATUS_USER_RESPONSE = 184 /* 0xb8 */, 260 HAL_TX_FES_STATUS_END = 185 /* 0xb9 */, 261 HAL_RX_TRIG_INFO = 186 /* 0xba */, 262 HAL_RXPCU_TX_SETUP_CLEAR = 187 /* 0xbb */, 263 HAL_RX_FRAME_BITMAP_REQ = 188 /* 0xbc */, 264 HAL_RX_FRAME_BITMAP_ACK = 189 /* 0xbd */, 265 HAL_COEX_RX_STATUS = 190 /* 0xbe */, 266 HAL_RX_START_PARAM = 191 /* 0xbf */, 267 HAL_RX_PPDU_START = 192 /* 0xc0 */, 268 HAL_RX_PPDU_END = 193 /* 0xc1 */, 269 HAL_RX_MPDU_START = 194 /* 0xc2 */, 270 HAL_RX_MPDU_END = 195 /* 0xc3 */, 271 HAL_RX_MSDU_START = 196 /* 0xc4 */, 272 HAL_RX_MSDU_END = 197 /* 0xc5 */, 273 HAL_RX_ATTENTION = 198 /* 0xc6 */, 274 HAL_RECEIVED_RESPONSE_INFO = 199 /* 0xc7 */, 275 HAL_RX_PHY_SLEEP = 200 /* 0xc8 */, 276 HAL_RX_HEADER = 201 /* 0xc9 */, 277 HAL_RX_PEER_ENTRY = 202 /* 0xca */, 278 HAL_RX_FLUSH = 203 /* 0xcb */, 279 HAL_RX_RESPONSE_REQUIRED_INFO = 204 /* 0xcc */, 280 HAL_RX_FRAMELESS_BAR_DETAILS = 205 /* 0xcd */, 281 HAL_TQM_GET_MPDU_QUEUE_STATS_STATUS = 206 /* 0xce */, 282 HAL_TQM_GET_MSDU_FLOW_STATS_STATUS = 207 /* 0xcf */, 283 HAL_TX_CBF_INFO = 208 /* 0xd0 */, 284 HAL_PCU_PPDU_SETUP_USER = 209 /* 0xd1 */, 285 HAL_RX_MPDU_PCU_START = 210 /* 0xd2 */, 286 HAL_RX_PM_INFO = 211 /* 0xd3 */, 287 HAL_RX_USER_PPDU_END = 212 /* 0xd4 */, 288 HAL_RX_PRE_PPDU_START = 213 /* 0xd5 */, 289 HAL_RX_PREAMBLE = 214 /* 0xd6 */, 290 HAL_TX_FES_SETUP_COMPLETE = 215 /* 0xd7 */, 291 HAL_TX_LAST_MPDU_FETCHED = 216 /* 0xd8 */, 292 HAL_TXDMA_STOP_REQUEST = 217 /* 0xd9 */, 293 HAL_RXPCU_SETUP = 218 /* 0xda */, 294 HAL_RXPCU_USER_SETUP = 219 /* 0xdb */, 295 HAL_TX_FES_STATUS_ACK_OR_BA = 220 /* 0xdc */, 296 HAL_TQM_ACKED_MPDU = 221 /* 0xdd */, 297 HAL_COEX_TX_RESP = 222 /* 0xde */, 298 HAL_COEX_TX_STATUS = 223 /* 0xdf */, 299 HAL_MACTX_COEX_PHY_CTRL = 224 /* 0xe0 */, 300 HAL_COEX_STATUS_BROADCAST = 225 /* 0xe1 */, 301 HAL_RESPONSE_START_STATUS = 226 /* 0xe2 */, 302 HAL_RESPONSEND_STATUS = 227 /* 0xe3 */, 303 HAL_CRYPTO_STATUS = 228 /* 0xe4 */, 304 HAL_RECEIVED_TRIGGER_INFO = 229 /* 0xe5 */, 305 HAL_COEX_TX_STOP_CTRL = 230 /* 0xe6 */, 306 HAL_RX_PPDU_ACK_REPORT = 231 /* 0xe7 */, 307 HAL_RX_PPDU_NO_ACK_REPORT = 232 /* 0xe8 */, 308 HAL_SCH_COEX_STATUS = 233 /* 0xe9 */, 309 HAL_SCHEDULER_COMMAND_STATUS = 234 /* 0xea */, 310 HAL_SCHEDULER_RX_PPDU_NO_RESPONSE_STATUS = 235 /* 0xeb */, 311 HAL_TX_FES_STATUS_PROT = 236 /* 0xec */, 312 HAL_TX_FES_STATUS_START_PPDU = 237 /* 0xed */, 313 HAL_TX_FES_STATUS_START_PROT = 238 /* 0xee */, 314 HAL_TXPCU_PHYTX_DEBUG32 = 239 /* 0xef */, 315 HAL_TXPCU_PHYTX_OTHER_TRANSMIT_INFO32 = 240 /* 0xf0 */, 316 HAL_TX_MPDU_COUNT_TRANSFERND = 241 /* 0xf1 */, 317 HAL_WHO_ANCHOR_OFFSET = 242 /* 0xf2 */, 318 HAL_WHO_ANCHOR_VALUE = 243 /* 0xf3 */, 319 HAL_WHO_CCE_INFO = 244 /* 0xf4 */, 320 HAL_WHO_COMMIT = 245 /* 0xf5 */, 321 HAL_WHO_COMMIT_DONE = 246 /* 0xf6 */, 322 HAL_WHO_FLUSH = 247 /* 0xf7 */, 323 HAL_WHO_L2_LLC = 248 /* 0xf8 */, 324 HAL_WHO_L2_PAYLOAD = 249 /* 0xf9 */, 325 HAL_WHO_L3_CHECKSUM = 250 /* 0xfa */, 326 HAL_WHO_L3_INFO = 251 /* 0xfb */, 327 HAL_WHO_L4_CHECKSUM = 252 /* 0xfc */, 328 HAL_WHO_L4_INFO = 253 /* 0xfd */, 329 HAL_WHO_MSDU = 254 /* 0xfe */, 330 HAL_WHO_MSDU_MISC = 255 /* 0xff */, 331 HAL_WHO_PACKET_DATA = 256 /* 0x100 */, 332 HAL_WHO_PACKET_HDR = 257 /* 0x101 */, 333 HAL_WHO_PPDU_END = 258 /* 0x102 */, 334 HAL_WHO_PPDU_START = 259 /* 0x103 */, 335 HAL_WHO_TSO = 260 /* 0x104 */, 336 HAL_WHO_WMAC_HEADER_PV0 = 261 /* 0x105 */, 337 HAL_WHO_WMAC_HEADER_PV1 = 262 /* 0x106 */, 338 HAL_WHO_WMAC_IV = 263 /* 0x107 */, 339 HAL_MPDU_INFO_END = 264 /* 0x108 */, 340 HAL_MPDU_INFO_BITMAP = 265 /* 0x109 */, 341 HAL_TX_QUEUE_EXTENSION = 266 /* 0x10a */, 342 HAL_SCHEDULER_SELFGEN_RESPONSE_STATUS = 267 /* 0x10b */, 343 HAL_TQM_UPDATE_TX_MPDU_COUNT_STATUS = 268 /* 0x10c */, 344 HAL_TQM_ACKED_MPDU_STATUS = 269 /* 0x10d */, 345 HAL_TQM_ADD_MSDU_STATUS = 270 /* 0x10e */, 346 HAL_TQM_LIST_GEN_DONE = 271 /* 0x10f */, 347 HAL_WHO_TERMINATE = 272 /* 0x110 */, 348 HAL_TX_LAST_MPDU_END = 273 /* 0x111 */, 349 HAL_TX_CV_DATA = 274 /* 0x112 */, 350 HAL_PPDU_TX_END = 275 /* 0x113 */, 351 HAL_PROT_TX_END = 276 /* 0x114 */, 352 HAL_MPDU_INFO_GLOBAL_END = 277 /* 0x115 */, 353 HAL_TQM_SCH_INSTR_GLOBAL_END = 278 /* 0x116 */, 354 HAL_RX_PPDU_END_USER_STATS = 279 /* 0x117 */, 355 HAL_RX_PPDU_END_USER_STATS_EXT = 280 /* 0x118 */, 356 HAL_REO_GET_QUEUE_STATS = 281 /* 0x119 */, 357 HAL_REO_FLUSH_QUEUE = 282 /* 0x11a */, 358 HAL_REO_FLUSH_CACHE = 283 /* 0x11b */, 359 HAL_REO_UNBLOCK_CACHE = 284 /* 0x11c */, 360 HAL_REO_GET_QUEUE_STATS_STATUS = 285 /* 0x11d */, 361 HAL_REO_FLUSH_QUEUE_STATUS = 286 /* 0x11e */, 362 HAL_REO_FLUSH_CACHE_STATUS = 287 /* 0x11f */, 363 HAL_REO_UNBLOCK_CACHE_STATUS = 288 /* 0x120 */, 364 HAL_TQM_FLUSH_CACHE = 289 /* 0x121 */, 365 HAL_TQM_UNBLOCK_CACHE = 290 /* 0x122 */, 366 HAL_TQM_FLUSH_CACHE_STATUS = 291 /* 0x123 */, 367 HAL_TQM_UNBLOCK_CACHE_STATUS = 292 /* 0x124 */, 368 HAL_RX_PPDU_END_STATUS_DONE = 293 /* 0x125 */, 369 HAL_RX_STATUS_BUFFER_DONE = 294 /* 0x126 */, 370 HAL_TX_DATA_SYNC = 297 /* 0x129 */, 371 HAL_PHYRX_CBF_READ_REQUEST_ACK = 298 /* 0x12a */, 372 HAL_TQM_GET_MPDU_HEAD_INFO = 299 /* 0x12b */, 373 HAL_TQM_SYNC_CMD = 300 /* 0x12c */, 374 HAL_TQM_GET_MPDU_HEAD_INFO_STATUS = 301 /* 0x12d */, 375 HAL_TQM_SYNC_CMD_STATUS = 302 /* 0x12e */, 376 HAL_TQM_THRESHOLD_DROP_NOTIFICATION_STATUS = 303 /* 0x12f */, 377 HAL_TQM_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 304 /* 0x130 */, 378 HAL_REO_FLUSH_TIMEOUT_LIST = 305 /* 0x131 */, 379 HAL_REO_FLUSH_TIMEOUT_LIST_STATUS = 306 /* 0x132 */, 380 HAL_REO_DESCRIPTOR_THRESHOLD_REACHED_STATUS = 307 /* 0x133 */, 381 HAL_SCHEDULER_RX_SIFS_RESPONSE_TRIGGER_STATUS = 308 /* 0x134 */, 382 HALXAMPLE_USER_TLV_32_NAME = 309 /* 0x135 */, 383 HAL_RX_PPDU_START_USER_INFO = 310 /* 0x136 */, 384 HAL_RX_RING_MASK = 311 /* 0x137 */, 385 HAL_COEX_MAC_NAP = 312 /* 0x138 */, 386 HAL_RXPCU_PPDU_END_INFO = 313 /* 0x139 */, 387 HAL_WHO_MESH_CONTROL = 314 /* 0x13a */, 388 HAL_PDG_SW_MODE_BW_START = 315 /* 0x13b */, 389 HAL_PDG_SW_MODE_BW_END = 316 /* 0x13c */, 390 HAL_PDG_WAIT_FOR_MAC_REQUEST = 317 /* 0x13d */, 391 HAL_PDG_WAIT_FOR_PHY_REQUEST = 318 /* 0x13e */, 392 HAL_SCHEDULER_END = 319 /* 0x13f */, 393 HAL_RX_PPDU_START_DROPPED = 320 /* 0x140 */, 394 HAL_RX_PPDU_END_DROPPED = 321 /* 0x141 */, 395 HAL_RX_PPDU_END_STATUS_DONE_DROPPED = 322 /* 0x142 */, 396 HAL_RX_MPDU_START_DROPPED = 323 /* 0x143 */, 397 HAL_RX_MSDU_START_DROPPED = 324 /* 0x144 */, 398 HAL_RX_MSDU_END_DROPPED = 325 /* 0x145 */, 399 HAL_RX_MPDU_END_DROPPED = 326 /* 0x146 */, 400 HAL_RX_ATTENTION_DROPPED = 327 /* 0x147 */, 401 HAL_TXPCU_USER_SETUP = 328 /* 0x148 */, 402 HAL_RXPCU_USER_SETUP_EXT = 329 /* 0x149 */, 403 HAL_CMD_PART_0_END = 330 /* 0x14a */, 404 HAL_MACTX_SYNTH_ON = 331 /* 0x14b */, 405 HAL_SCH_CRITICAL_TLV_REFERENCE = 332 /* 0x14c */, 406 HAL_TQM_MPDU_GLOBAL_START = 333 /* 0x14d */, 407 HALXAMPLE_TLV_32 = 334 /* 0x14e */, 408 HAL_TQM_UPDATE_TX_MSDU_FLOW = 335 /* 0x14f */, 409 HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD = 336 /* 0x150 */, 410 HAL_TQM_UPDATE_TX_MSDU_FLOW_STATUS = 337 /* 0x151 */, 411 HAL_TQM_UPDATE_TX_MPDU_QUEUE_HEAD_STATUS = 338 /* 0x152 */, 412 HAL_REO_UPDATE_RX_REO_QUEUE = 339 /* 0x153 */, 413 HAL_TQM_MPDU_QUEUEMPTY_STATUS = 340 /* 0x154 */, 414 HAL_TQM_2_SCH_MPDU_AVAILABLE = 341 /* 0x155 */, 415 HAL_PDG_TRIG_RESPONSE = 342 /* 0x156 */, 416 HAL_TRIGGER_RESPONSE_TX_DONE = 343 /* 0x157 */, 417 HAL_ABORT_FROM_PHYRX_DETAILS = 344 /* 0x158 */, 418 HAL_SCH_TQM_CMD_WRAPPER = 345 /* 0x159 */, 419 HAL_MPDUS_AVAILABLE = 346 /* 0x15a */, 420 HAL_RECEIVED_RESPONSE_INFO_PART2 = 347 /* 0x15b */, 421 HAL_PHYRX_TX_START_TIMING = 348 /* 0x15c */, 422 HAL_TXPCU_PREAMBLE_DONE = 349 /* 0x15d */, 423 HAL_NDP_PREAMBLE_DONE = 350 /* 0x15e */, 424 HAL_SCH_TQM_CMD_WRAPPER_RBO_DROP = 351 /* 0x15f */, 425 HAL_SCH_TQM_CMD_WRAPPER_CONT_DROP = 352 /* 0x160 */, 426 HAL_MACTX_CLEAR_PREV_TX_INFO = 353 /* 0x161 */, 427 HAL_TX_PUNCTURE_SETUP = 354 /* 0x162 */, 428 HAL_R2R_STATUS_END = 355 /* 0x163 */, 429 HAL_MACTX_PREFETCH_CV_COMMON = 356 /* 0x164 */, 430 HAL_END_OF_FLUSH_MARKER = 357 /* 0x165 */, 431 HAL_MACTX_MU_UPLINK_COMMON_PUNC = 358 /* 0x166 */, 432 HAL_MACTX_MU_UPLINK_USER_SETUP_PUNC = 359 /* 0x167 */, 433 HAL_RECEIVED_RESPONSE_USER_7_0 = 360 /* 0x168 */, 434 HAL_RECEIVED_RESPONSE_USER_15_8 = 361 /* 0x169 */, 435 HAL_RECEIVED_RESPONSE_USER_23_16 = 362 /* 0x16a */, 436 HAL_RECEIVED_RESPONSE_USER_31_24 = 363 /* 0x16b */, 437 HAL_RECEIVED_RESPONSE_USER_36_32 = 364 /* 0x16c */, 438 HAL_TX_LOOPBACK_SETUP = 365 /* 0x16d */, 439 HAL_PHYRX_OTHER_RECEIVE_INFO_RU_DETAILS = 366 /* 0x16e */, 440 HAL_SCH_WAIT_INSTR_TX_PATH = 367 /* 0x16f */, 441 HAL_MACTX_OTHER_TRANSMIT_INFO_TX2TX = 368 /* 0x170 */, 442 HAL_MACTX_OTHER_TRANSMIT_INFOMUPHY_SETUP = 369 /* 0x171 */, 443 HAL_PHYRX_OTHER_RECEIVE_INFOVM_DETAILS = 370 /* 0x172 */, 444 HAL_TX_WUR_DATA = 371 /* 0x173 */, 445 HAL_RX_PPDU_END_START = 372 /* 0x174 */, 446 HAL_RX_PPDU_END_MIDDLE = 373 /* 0x175 */, 447 HAL_RX_PPDU_END_LAST = 374 /* 0x176 */, 448 HAL_MACTX_BACKOFF_BASED_TRANSMISSION = 375 /* 0x177 */, 449 HAL_MACTX_OTHER_TRANSMIT_INFO_DL_OFDMA_TX = 376 /* 0x178 */, 450 HAL_SRP_INFO = 377 /* 0x179 */, 451 HAL_OBSS_SR_INFO = 378 /* 0x17a */, 452 HAL_SCHEDULER_SW_MSG_STATUS = 379 /* 0x17b */, 453 HAL_HWSCH_RXPCU_MAC_INFO_ANNOUNCEMENT = 380 /* 0x17c */, 454 HAL_RXPCU_SETUP_COMPLETE = 381 /* 0x17d */, 455 HAL_SNOOP_PPDU_START = 382 /* 0x17e */, 456 HAL_SNOOP_MPDU_USR_DBG_INFO = 383 /* 0x17f */, 457 HAL_SNOOP_MSDU_USR_DBG_INFO = 384 /* 0x180 */, 458 HAL_SNOOP_MSDU_USR_DATA = 385 /* 0x181 */, 459 HAL_SNOOP_MPDU_USR_STAT_INFO = 386 /* 0x182 */, 460 HAL_SNOOP_PPDU_END = 387 /* 0x183 */, 461 HAL_SNOOP_SPARE = 388 /* 0x184 */, 462 HAL_PHYRX_OTHER_RECEIVE_INFO_MU_RSSI_COMMON = 390 /* 0x186 */, 463 HAL_PHYRX_OTHER_RECEIVE_INFO_MU_RSSI_USER = 391 /* 0x187 */, 464 HAL_MACTX_OTHER_TRANSMIT_INFO_SCH_DETAILS = 392 /* 0x188 */, 465 HAL_PHYRX_OTHER_RECEIVE_INFO_108PVM_DETAILS = 393 /* 0x189 */, 466 HAL_SCH_TLV_WRAPPER = 394 /* 0x18a */, 467 HAL_SCHEDULER_STATUS_WRAPPER = 395 /* 0x18b */, 468 HAL_MPDU_INFO_6X = 396 /* 0x18c */, 469 HAL_MACTX_11AZ_USER_DESC_PER_USER = 397 /* 0x18d */, 470 HAL_MACTX_U_SIGHT_SU_MU = 398 /* 0x18e */, 471 HAL_MACTX_U_SIGHT_TB = 399 /* 0x18f */, 472 HAL_PHYRX_U_SIGHT_SU_MU = 403 /* 0x193 */, 473 HAL_PHYRX_U_SIGHT_TB = 404 /* 0x194 */, 474 HAL_MACRX_LMR_READ_REQUEST = 408 /* 0x198 */, 475 HAL_MACRX_LMR_DATA_REQUEST = 409 /* 0x199 */, 476 HAL_PHYRX_LMR_TRANSFER_DONE = 410 /* 0x19a */, 477 HAL_PHYRX_LMR_TRANSFER_ABORT = 411 /* 0x19b */, 478 HAL_PHYRX_LMR_READ_REQUEST_ACK = 412 /* 0x19c */, 479 HAL_MACRX_SECURE_LTF_SEQ_PTR = 413 /* 0x19d */, 480 HAL_PHYRX_USER_INFO_MU_UL = 414 /* 0x19e */, 481 HAL_MPDU_QUEUE_OVERVIEW = 415 /* 0x19f */, 482 HAL_SCHEDULER_NAV_INFO = 416 /* 0x1a0 */, 483 HAL_LMR_PEER_ENTRY = 418 /* 0x1a2 */, 484 HAL_LMR_MPDU_START = 419 /* 0x1a3 */, 485 HAL_LMR_DATA = 420 /* 0x1a4 */, 486 HAL_LMR_MPDU_END = 421 /* 0x1a5 */, 487 HAL_REO_GET_QUEUE_1K_STATS_STATUS = 422 /* 0x1a6 */, 488 HAL_RX_FRAME_1K_BITMAP_ACK = 423 /* 0x1a7 */, 489 HAL_TX_FES_STATUS_1K_BA = 424 /* 0x1a8 */, 490 HAL_TQM_ACKED_1K_MPDU = 425 /* 0x1a9 */, 491 HAL_MACRX_INBSS_OBSS_IND = 426 /* 0x1aa */, 492 HAL_PHYRX_LOCATION = 427 /* 0x1ab */, 493 HAL_MLO_TX_NOTIFICATION_SU = 428 /* 0x1ac */, 494 HAL_MLO_TX_NOTIFICATION_MU = 429 /* 0x1ad */, 495 HAL_MLO_TX_REQ_SU = 430 /* 0x1ae */, 496 HAL_MLO_TX_REQ_MU = 431 /* 0x1af */, 497 HAL_MLO_TX_RESP = 432 /* 0x1b0 */, 498 HAL_MLO_RX_NOTIFICATION = 433 /* 0x1b1 */, 499 HAL_MLO_BKOFF_TRUNC_REQ = 434 /* 0x1b2 */, 500 HAL_MLO_TBTT_NOTIFICATION = 435 /* 0x1b3 */, 501 HAL_MLO_MESSAGE = 436 /* 0x1b4 */, 502 HAL_MLO_TS_SYNC_MSG = 437 /* 0x1b5 */, 503 HAL_MLO_FES_SETUP = 438 /* 0x1b6 */, 504 HAL_MLO_PDG_FES_SETUP_SU = 439 /* 0x1b7 */, 505 HAL_MLO_PDG_FES_SETUP_MU = 440 /* 0x1b8 */, 506 HAL_MPDU_INFO_1K_BITMAP = 441 /* 0x1b9 */, 507 HAL_MON_BUF_ADDR = 442 /* 0x1ba */, 508 HAL_TX_FRAG_STATE = 443 /* 0x1bb */, 509 HAL_MACTXHT_SIG_USR_OFDMA = 446 /* 0x1be */, 510 HAL_PHYRXHT_SIG_CMN_PUNC = 448 /* 0x1c0 */, 511 HAL_PHYRXHT_SIG_CMN_OFDMA = 450 /* 0x1c2 */, 512 HAL_PHYRXHT_SIG_USR_OFDMA = 454 /* 0x1c6 */, 513 HAL_PHYRX_PKT_END_PART1 = 456 /* 0x1c8 */, 514 HAL_MACTXXPECT_NDP_RECEPTION = 457 /* 0x1c9 */, 515 HAL_MACTX_SECURE_LTF_SEQ_PTR = 458 /* 0x1ca */, 516 HAL_MLO_PDG_BKOFF_TRUNC_NOTIFY = 460 /* 0x1cc */, 517 HAL_PHYRX_11AZ_INTEGRITY_DATA = 461 /* 0x1cd */, 518 HAL_PHYTX_LOCATION = 462 /* 0x1ce */, 519 HAL_PHYTX_11AZ_INTEGRITY_DATA = 463 /* 0x1cf */, 520 HAL_MACTXHT_SIG_USR_SU = 466 /* 0x1d2 */, 521 HAL_MACTXHT_SIG_USR_MU_MIMO = 467 /* 0x1d3 */, 522 HAL_PHYRXHT_SIG_USR_SU = 468 /* 0x1d4 */, 523 HAL_PHYRXHT_SIG_USR_MU_MIMO = 469 /* 0x1d5 */, 524 HAL_PHYRX_GENERIC_U_SIG = 470 /* 0x1d6 */, 525 HAL_PHYRX_GENERICHT_SIG = 471 /* 0x1d7 */, 526 HAL_OVERWRITE_RESP_START = 472 /* 0x1d8 */, 527 HAL_OVERWRITE_RESP_PREAMBLE_INFO = 473 /* 0x1d9 */, 528 HAL_OVERWRITE_RESP_FRAME_INFO = 474 /* 0x1da */, 529 HAL_OVERWRITE_RESP_END = 475 /* 0x1db */, 530 HAL_RXPCUARLY_RX_INDICATION = 476 /* 0x1dc */, 531 HAL_MON_DROP = 477 /* 0x1dd */, 532 HAL_MACRX_MU_UPLINK_COMMON_SNIFF = 478 /* 0x1de */, 533 HAL_MACRX_MU_UPLINK_USER_SETUP_SNIFF = 479 /* 0x1df */, 534 HAL_MACRX_MU_UPLINK_USER_SEL_SNIFF = 480 /* 0x1e0 */, 535 HAL_MACRX_MU_UPLINK_FCS_STATUS_SNIFF = 481 /* 0x1e1 */, 536 HAL_MACTX_PREFETCH_CV_DMA = 482 /* 0x1e2 */, 537 HAL_MACTX_PREFETCH_CV_PER_USER = 483 /* 0x1e3 */, 538 HAL_PHYRX_OTHER_RECEIVE_INFO_ALL_SIGB_DETAILS = 484 /* 0x1e4 */, 539 HAL_MACTX_BF_PARAMS_UPDATE_COMMON = 485 /* 0x1e5 */, 540 HAL_MACTX_BF_PARAMS_UPDATE_PER_USER = 486 /* 0x1e6 */, 541 HAL_RANGING_USER_DETAILS = 487 /* 0x1e7 */, 542 HAL_PHYTX_CV_CORR_STATUS = 488 /* 0x1e8 */, 543 HAL_PHYTX_CV_CORR_COMMON = 489 /* 0x1e9 */, 544 HAL_PHYTX_CV_CORR_USER = 490 /* 0x1ea */, 545 HAL_MACTX_CV_CORR_COMMON = 491 /* 0x1eb */, 546 HAL_MACTX_CV_CORR_MAC_INFO_GROUP = 492 /* 0x1ec */, 547 HAL_BW_PUNCTUREVAL_WRAPPER = 493 /* 0x1ed */, 548 HAL_MACTX_RX_NOTIFICATION_FOR_PHY = 494 /* 0x1ee */, 549 HAL_MACTX_TX_NOTIFICATION_FOR_PHY = 495 /* 0x1ef */, 550 HAL_MACTX_MU_UPLINK_COMMON_PER_BW = 496 /* 0x1f0 */, 551 HAL_MACTX_MU_UPLINK_USER_SETUP_PER_BW = 497 /* 0x1f1 */, 552 HAL_RX_PPDU_END_USER_STATS_EXT2 = 498 /* 0x1f2 */, 553 HAL_FW2SW_MON = 499 /* 0x1f3 */, 554 HAL_WSI_DIRECT_MESSAGE = 500 /* 0x1f4 */, 555 HAL_MACTXMLSR_PRE_SWITCH = 501 /* 0x1f5 */, 556 HAL_MACTXMLSR_SWITCH = 502 /* 0x1f6 */, 557 HAL_MACTXMLSR_SWITCH_BACK = 503 /* 0x1f7 */, 558 HAL_PHYTXMLSR_SWITCH_ACK = 504 /* 0x1f8 */, 559 HAL_PHYTXMLSR_SWITCH_BACK_ACK = 505 /* 0x1f9 */, 560 HAL_SPARE_REUSE_TAG_0 = 506 /* 0x1fa */, 561 HAL_SPARE_REUSE_TAG_1 = 507 /* 0x1fb */, 562 HAL_SPARE_REUSE_TAG_2 = 508 /* 0x1fc */, 563 HAL_SPARE_REUSE_TAG_3 = 509 /* 0x1fd */, 564 /* FIXME: Assign correct value for HAL_TCL_DATA_CMD */ 565 HAL_TCL_DATA_CMD = 510, 566 HAL_TLV_BASE = 511 /* 0x1ff */, 567 }; 568 569 #define HAL_TLV_HDR_TAG GENMASK(9, 1) 570 #define HAL_TLV_HDR_LEN GENMASK(25, 10) 571 #define HAL_TLV_USR_ID GENMASK(31, 26) 572 573 #define HAL_TLV_ALIGN 4 574 575 struct hal_tlv_hdr { 576 __le32 tl; 577 u8 value[]; 578 } __packed; 579 580 #define HAL_TLV_64_HDR_TAG GENMASK(9, 1) 581 #define HAL_TLV_64_HDR_LEN GENMASK(21, 10) 582 583 struct hal_tlv_64_hdr { 584 u64 tl; 585 u8 value[]; 586 } __packed; 587 588 #define RX_MPDU_DESC_INFO0_MSDU_COUNT GENMASK(7, 0) 589 #define RX_MPDU_DESC_INFO0_FRAG_FLAG BIT(8) 590 #define RX_MPDU_DESC_INFO0_MPDU_RETRY BIT(9) 591 #define RX_MPDU_DESC_INFO0_AMPDU_FLAG BIT(10) 592 #define RX_MPDU_DESC_INFO0_BAR_FRAME BIT(11) 593 #define RX_MPDU_DESC_INFO0_VALID_PN BIT(12) 594 #define RX_MPDU_DESC_INFO0_RAW_MPDU BIT(13) 595 #define RX_MPDU_DESC_INFO0_MORE_FRAG_FLAG BIT(14) 596 #define RX_MPDU_DESC_INFO0_SRC_INFO GENMASK(26, 15) 597 #define RX_MPDU_DESC_INFO0_MPDU_QOS_CTRL_VALID BIT(27) 598 #define RX_MPDU_DESC_INFO0_TID GENMASK(31, 28) 599 600 /* TODO revisit after meta data is concluded */ 601 #define RX_MPDU_DESC_META_DATA_PEER_ID GENMASK(15, 0) 602 603 struct rx_mpdu_desc { 604 __le32 info0; /* %RX_MPDU_DESC_INFO */ 605 __le32 peer_meta_data; 606 } __packed; 607 608 /* rx_mpdu_desc 609 * Producer: RXDMA 610 * Consumer: REO/SW/FW 611 * 612 * msdu_count 613 * The number of MSDUs within the MPDU 614 * 615 * fragment_flag 616 * When set, this MPDU is a fragment and REO should forward this 617 * fragment MPDU to the REO destination ring without any reorder 618 * checks, pn checks or bitmap update. This implies that REO is 619 * forwarding the pointer to the MSDU link descriptor. 620 * 621 * mpdu_retry_bit 622 * The retry bit setting from the MPDU header of the received frame 623 * 624 * ampdu_flag 625 * Indicates the MPDU was received as part of an A-MPDU. 626 * 627 * bar_frame 628 * Indicates the received frame is a BAR frame. After processing, 629 * this frame shall be pushed to SW or deleted. 630 * 631 * valid_pn 632 * When not set, REO will not perform a PN sequence number check. 633 * 634 * raw_mpdu 635 * Field only valid when first_msdu_in_mpdu_flag is set. Indicates 636 * the contents in the MSDU buffer contains a 'RAW' MPDU. This 637 * 'RAW' MPDU might be spread out over multiple MSDU buffers. 638 * 639 * more_fragment_flag 640 * The More Fragment bit setting from the MPDU header of the 641 * received frame 642 * 643 * src_info 644 * Source (Virtual) device/interface info associated with this peer. 645 * This field gets passed on by REO to PPE in the EDMA descriptor. 646 * 647 * mpdu_qos_control_valid 648 * When set, the MPDU has a QoS control field 649 * 650 * tid 651 * Field only valid when mpdu_qos_control_valid is set 652 */ 653 654 enum hal_rx_msdu_desc_reo_dest_ind { 655 HAL_RX_MSDU_DESC_REO_DEST_IND_TCL, 656 HAL_RX_MSDU_DESC_REO_DEST_IND_SW1, 657 HAL_RX_MSDU_DESC_REO_DEST_IND_SW2, 658 HAL_RX_MSDU_DESC_REO_DEST_IND_SW3, 659 HAL_RX_MSDU_DESC_REO_DEST_IND_SW4, 660 HAL_RX_MSDU_DESC_REO_DEST_IND_RELEASE, 661 HAL_RX_MSDU_DESC_REO_DEST_IND_FW, 662 HAL_RX_MSDU_DESC_REO_DEST_IND_SW5, 663 HAL_RX_MSDU_DESC_REO_DEST_IND_SW6, 664 HAL_RX_MSDU_DESC_REO_DEST_IND_SW7, 665 HAL_RX_MSDU_DESC_REO_DEST_IND_SW8, 666 }; 667 668 #define RX_MSDU_DESC_INFO0_FIRST_MSDU_IN_MPDU BIT(0) 669 #define RX_MSDU_DESC_INFO0_LAST_MSDU_IN_MPDU BIT(1) 670 #define RX_MSDU_DESC_INFO0_MSDU_CONTINUATION BIT(2) 671 #define RX_MSDU_DESC_INFO0_MSDU_LENGTH GENMASK(16, 3) 672 #define RX_MSDU_DESC_INFO0_MSDU_DROP BIT(17) 673 #define RX_MSDU_DESC_INFO0_VALID_SA BIT(18) 674 #define RX_MSDU_DESC_INFO0_VALID_DA BIT(19) 675 #define RX_MSDU_DESC_INFO0_DA_MCBC BIT(20) 676 #define RX_MSDU_DESC_INFO0_L3_HDR_PAD_MSB BIT(21) 677 #define RX_MSDU_DESC_INFO0_TCP_UDP_CHKSUM_FAIL BIT(22) 678 #define RX_MSDU_DESC_INFO0_IP_CHKSUM_FAIL BIT(23) 679 #define RX_MSDU_DESC_INFO0_FROM_DS BIT(24) 680 #define RX_MSDU_DESC_INFO0_TO_DS BIT(25) 681 #define RX_MSDU_DESC_INFO0_INTRA_BSS BIT(26) 682 #define RX_MSDU_DESC_INFO0_DST_CHIP_ID GENMASK(28, 27) 683 #define RX_MSDU_DESC_INFO0_DECAP_FORMAT GENMASK(30, 29) 684 685 #define HAL_RX_MSDU_PKT_LENGTH_GET(val) \ 686 (u32_get_bits((val), RX_MSDU_DESC_INFO0_MSDU_LENGTH)) 687 688 struct rx_msdu_desc { 689 __le32 info0; 690 } __packed; 691 692 /* rx_msdu_desc 693 * 694 * first_msdu_in_mpdu 695 * Indicates first msdu in mpdu. 696 * 697 * last_msdu_in_mpdu 698 * Indicates last msdu in mpdu. This flag can be true only when 699 * 'Msdu_continuation' set to 0. This implies that when an msdu 700 * is spread out over multiple buffers and thus msdu_continuation 701 * is set, only for the very last buffer of the msdu, can the 702 * 'last_msdu_in_mpdu' be set. 703 * 704 * When both first_msdu_in_mpdu and last_msdu_in_mpdu are set, 705 * the MPDU that this MSDU belongs to only contains a single MSDU. 706 * 707 * msdu_continuation 708 * When set, this MSDU buffer was not able to hold the entire MSDU. 709 * The next buffer will therefor contain additional information 710 * related to this MSDU. 711 * 712 * msdu_length 713 * Field is only valid in combination with the 'first_msdu_in_mpdu' 714 * being set. Full MSDU length in bytes after decapsulation. This 715 * field is still valid for MPDU frames without A-MSDU. It still 716 * represents MSDU length after decapsulation Or in case of RAW 717 * MPDUs, it indicates the length of the entire MPDU (without FCS 718 * field). 719 * 720 * msdu_drop 721 * Indicates that REO shall drop this MSDU and not forward it to 722 * any other ring. 723 * 724 * valid_sa 725 * Indicates OLE found a valid SA entry for this MSDU. 726 * 727 * valid_da 728 * When set, OLE found a valid DA entry for this MSDU. 729 * 730 * da_mcbc 731 * Field Only valid if valid_da is set. Indicates the DA address 732 * is a Multicast or Broadcast address for this MSDU. 733 * 734 * l3_header_padding_msb 735 * Passed on from 'RX_MSDU_END' TLV (only the MSB is reported as 736 * the LSB is always zero). Number of bytes padded to make sure 737 * that the L3 header will always start of a Dword boundary 738 * 739 * tcp_udp_checksum_fail 740 * Passed on from 'RX_ATTENTION' TLV 741 * Indicates that the computed checksum did not match the checksum 742 * in the TCP/UDP header. 743 * 744 * ip_checksum_fail 745 * Passed on from 'RX_ATTENTION' TLV 746 * Indicates that the computed checksum did not match the checksum 747 * in the IP header. 748 * 749 * from_DS 750 * Set if the 'from DS' bit is set in the frame control. 751 * 752 * to_DS 753 * Set if the 'to DS' bit is set in the frame control. 754 * 755 * intra_bss 756 * This packet needs intra-BSS routing by SW as the 'vdev_id' 757 * for the destination is the same as the 'vdev_id' that this 758 * MSDU was got in. 759 * 760 * dest_chip_id 761 * If intra_bss is set, copied by RXOLE/RXDMA from 'ADDR_SEARCH_ENTRY' 762 * to support intra-BSS routing with multi-chip multi-link operation. 763 * This indicates into which chip's TCL the packet should be queued. 764 * 765 * decap_format 766 * Indicates the format after decapsulation: 767 */ 768 769 #define RX_MSDU_EXT_DESC_INFO0_REO_DEST_IND GENMASK(4, 0) 770 #define RX_MSDU_EXT_DESC_INFO0_SERVICE_CODE GENMASK(13, 5) 771 #define RX_MSDU_EXT_DESC_INFO0_PRIORITY_VALID BIT(14) 772 #define RX_MSDU_EXT_DESC_INFO0_DATA_OFFSET GENMASK(26, 15) 773 #define RX_MSDU_EXT_DESC_INFO0_SRC_LINK_ID GENMASK(29, 27) 774 775 struct rx_msdu_ext_desc { 776 __le32 info0; 777 } __packed; 778 779 /* rx_msdu_ext_desc 780 * 781 * reo_destination_indication 782 * The ID of the REO exit ring where the MSDU frame shall push 783 * after (MPDU level) reordering has finished. 784 * 785 * service_code 786 * Opaque service code between PPE and Wi-Fi 787 * 788 * priority_valid 789 * 790 * data_offset 791 * The offset to Rx packet data within the buffer (including 792 * Rx DMA offset programming and L3 header padding inserted 793 * by Rx OLE). 794 * 795 * src_link_id 796 * Set to the link ID of the PMAC that received the frame 797 */ 798 799 enum hal_reo_dest_ring_buffer_type { 800 HAL_REO_DEST_RING_BUFFER_TYPE_MSDU, 801 HAL_REO_DEST_RING_BUFFER_TYPE_LINK_DESC, 802 }; 803 804 enum hal_reo_dest_ring_push_reason { 805 HAL_REO_DEST_RING_PUSH_REASON_ERR_DETECTED, 806 HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION, 807 }; 808 809 enum hal_reo_dest_ring_error_code { 810 HAL_REO_DEST_RING_ERROR_CODE_DESC_ADDR_ZERO, 811 HAL_REO_DEST_RING_ERROR_CODE_DESC_INVALID, 812 HAL_REO_DEST_RING_ERROR_CODE_AMPDU_IN_NON_BA, 813 HAL_REO_DEST_RING_ERROR_CODE_NON_BA_DUPLICATE, 814 HAL_REO_DEST_RING_ERROR_CODE_BA_DUPLICATE, 815 HAL_REO_DEST_RING_ERROR_CODE_FRAME_2K_JUMP, 816 HAL_REO_DEST_RING_ERROR_CODE_BAR_2K_JUMP, 817 HAL_REO_DEST_RING_ERROR_CODE_FRAME_OOR, 818 HAL_REO_DEST_RING_ERROR_CODE_BAR_OOR, 819 HAL_REO_DEST_RING_ERROR_CODE_NO_BA_SESSION, 820 HAL_REO_DEST_RING_ERROR_CODE_FRAME_SN_EQUALS_SSN, 821 HAL_REO_DEST_RING_ERROR_CODE_PN_CHECK_FAILED, 822 HAL_REO_DEST_RING_ERROR_CODE_2K_ERR_FLAG_SET, 823 HAL_REO_DEST_RING_ERROR_CODE_PN_ERR_FLAG_SET, 824 HAL_REO_DEST_RING_ERROR_CODE_DESC_BLOCKED, 825 HAL_REO_DEST_RING_ERROR_CODE_MAX, 826 }; 827 828 #define HAL_REO_DEST_RING_INFO0_BUFFER_TYPE BIT(0) 829 #define HAL_REO_DEST_RING_INFO0_PUSH_REASON GENMASK(2, 1) 830 #define HAL_REO_DEST_RING_INFO0_ERROR_CODE GENMASK(7, 3) 831 #define HAL_REO_DEST_RING_INFO0_MSDU_DATA_SIZE GENMASK(11, 8) 832 #define HAL_REO_DEST_RING_INFO0_SW_EXCEPTION BIT(12) 833 #define HAL_REO_DEST_RING_INFO0_SRC_LINK_ID GENMASK(15, 13) 834 #define HAL_REO_DEST_RING_INFO0_SIGNATURE GENMASK(19, 16) 835 #define HAL_REO_DEST_RING_INFO0_RING_ID GENMASK(27, 20) 836 #define HAL_REO_DEST_RING_INFO0_LOOPING_COUNT GENMASK(31, 28) 837 838 struct hal_reo_dest_ring { 839 struct ath12k_buffer_addr buf_addr_info; 840 struct rx_mpdu_desc rx_mpdu_info; 841 struct rx_msdu_desc rx_msdu_info; 842 __le32 buf_va_lo; 843 __le32 buf_va_hi; 844 __le32 info0; /* %HAL_REO_DEST_RING_INFO0_ */ 845 } __packed; 846 847 /* hal_reo_dest_ring 848 * 849 * Producer: RXDMA 850 * Consumer: REO/SW/FW 851 * 852 * buf_addr_info 853 * Details of the physical address of a buffer or MSDU 854 * link descriptor. 855 * 856 * rx_mpdu_info 857 * General information related to the MPDU that is passed 858 * on from REO entrance ring to the REO destination ring. 859 * 860 * rx_msdu_info 861 * General information related to the MSDU that is passed 862 * on from RXDMA all the way to the REO destination ring. 863 * 864 * buf_va_lo 865 * Field only valid if Reo_dest_buffer_type is set to MSDU_buf_address 866 * Lower 32 bits of the 64-bit virtual address corresponding 867 * to Buf_or_link_desc_addr_info 868 * 869 * buf_va_hi 870 * Address (upper 32 bits) of the REO queue descriptor. 871 * Upper 32 bits of the 64-bit virtual address corresponding 872 * to Buf_or_link_desc_addr_info 873 * 874 * buffer_type 875 * Indicates the type of address provided in the buf_addr_info. 876 * Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. 877 * 878 * push_reason 879 * Reason for pushing this frame to this exit ring. Values are 880 * defined in enum %HAL_REO_DEST_RING_PUSH_REASON_. 881 * 882 * error_code 883 * Valid only when 'push_reason' is set. All error codes are 884 * defined in enum %HAL_REO_DEST_RING_ERROR_CODE_. 885 * 886 * captured_msdu_data_size 887 * The number of following REO_DESTINATION STRUCTs that have 888 * been replaced with msdu_data extracted from the msdu_buffer 889 * and copied into the ring for easy FW/SW access. 890 * 891 * sw_exception 892 * This field has the same setting as the SW_exception field 893 * in the corresponding REO_entrance_ring descriptor. 894 * When set, the REO entrance descriptor is generated by FW, 895 * and the MPDU was processed in the following way: 896 * - NO re-order function is needed. 897 * - MPDU delinking is determined by the setting of Entrance 898 * ring field: SW_excection_mpdu_delink 899 * - Destination ring selection is based on the setting of 900 * the Entrance ring field SW_exception_destination _ring_valid 901 * 902 * src_link_id 903 * Set to the link ID of the PMAC that received the frame 904 * 905 * signature 906 * Set to value 0x8 when msdu capture mode is enabled for this ring 907 * 908 * ring_id 909 * The buffer pointer ring id. 910 * 0 - Idle ring 911 * 1 - N refers to other rings. 912 * 913 * looping_count 914 * Indicates the number of times the producer of entries into 915 * this ring has looped around the ring. 916 */ 917 918 #define HAL_REO_TO_PPE_RING_INFO0_DATA_LENGTH GENMASK(15, 0) 919 #define HAL_REO_TO_PPE_RING_INFO0_DATA_OFFSET GENMASK(23, 16) 920 #define HAL_REO_TO_PPE_RING_INFO0_POOL_ID GENMASK(28, 24) 921 #define HAL_REO_TO_PPE_RING_INFO0_PREHEADER BIT(29) 922 #define HAL_REO_TO_PPE_RING_INFO0_TSO_EN BIT(30) 923 #define HAL_REO_TO_PPE_RING_INFO0_MORE BIT(31) 924 925 struct hal_reo_to_ppe_ring { 926 __le32 buffer_addr; 927 __le32 info0; /* %HAL_REO_TO_PPE_RING_INFO0_ */ 928 } __packed; 929 930 /* hal_reo_to_ppe_ring 931 * 932 * Producer: REO 933 * Consumer: PPE 934 * 935 * buf_addr_info 936 * Details of the physical address of a buffer or MSDU 937 * link descriptor. 938 * 939 * data_length 940 * Length of valid data in bytes 941 * 942 * data_offset 943 * Offset to the data from buffer pointer. Can be used to 944 * strip header in the data for tunnel termination etc. 945 * 946 * pool_id 947 * REO has global configuration register for this field. 948 * It may have several free buffer pools, each 949 * RX-Descriptor ring can fetch free buffer from specific 950 * buffer pool; pool id will indicate which pool the buffer 951 * will be released to; POOL_ID Zero returned to SW 952 * 953 * preheader 954 * Disabled: 0 (Default) 955 * Enabled: 1 956 * 957 * tso_en 958 * Disabled: 0 (Default) 959 * Enabled: 1 960 * 961 * more 962 * More Segments followed 963 */ 964 965 enum hal_reo_entr_rxdma_push_reason { 966 HAL_REO_ENTR_RING_RXDMA_PUSH_REASON_ERR_DETECTED, 967 HAL_REO_ENTR_RING_RXDMA_PUSH_REASON_ROUTING_INSTRUCTION, 968 HAL_REO_ENTR_RING_RXDMA_PUSH_REASON_RX_FLUSH, 969 }; 970 971 enum hal_reo_entr_rxdma_ecode { 972 HAL_REO_ENTR_RING_RXDMA_ECODE_OVERFLOW_ERR, 973 HAL_REO_ENTR_RING_RXDMA_ECODE_MPDU_LEN_ERR, 974 HAL_REO_ENTR_RING_RXDMA_ECODE_FCS_ERR, 975 HAL_REO_ENTR_RING_RXDMA_ECODE_DECRYPT_ERR, 976 HAL_REO_ENTR_RING_RXDMA_ECODE_TKIP_MIC_ERR, 977 HAL_REO_ENTR_RING_RXDMA_ECODE_UNECRYPTED_ERR, 978 HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LEN_ERR, 979 HAL_REO_ENTR_RING_RXDMA_ECODE_MSDU_LIMIT_ERR, 980 HAL_REO_ENTR_RING_RXDMA_ECODE_WIFI_PARSE_ERR, 981 HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_PARSE_ERR, 982 HAL_REO_ENTR_RING_RXDMA_ECODE_SA_TIMEOUT_ERR, 983 HAL_REO_ENTR_RING_RXDMA_ECODE_DA_TIMEOUT_ERR, 984 HAL_REO_ENTR_RING_RXDMA_ECODE_FLOW_TIMEOUT_ERR, 985 HAL_REO_ENTR_RING_RXDMA_ECODE_FLUSH_REQUEST_ERR, 986 HAL_REO_ENTR_RING_RXDMA_ECODE_AMSDU_FRAG_ERR, 987 HAL_REO_ENTR_RING_RXDMA_ECODE_MAX, 988 }; 989 990 enum hal_rx_reo_dest_ring { 991 HAL_RX_REO_DEST_RING_TCL, 992 HAL_RX_REO_DEST_RING_SW1, 993 HAL_RX_REO_DEST_RING_SW2, 994 HAL_RX_REO_DEST_RING_SW3, 995 HAL_RX_REO_DEST_RING_SW4, 996 HAL_RX_REO_DEST_RING_RELEASE, 997 HAL_RX_REO_DEST_RING_FW, 998 HAL_RX_REO_DEST_RING_SW5, 999 HAL_RX_REO_DEST_RING_SW6, 1000 HAL_RX_REO_DEST_RING_SW7, 1001 HAL_RX_REO_DEST_RING_SW8, 1002 }; 1003 1004 #define HAL_REO_ENTR_RING_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) 1005 #define HAL_REO_ENTR_RING_INFO0_MPDU_BYTE_COUNT GENMASK(21, 8) 1006 #define HAL_REO_ENTR_RING_INFO0_DEST_IND GENMASK(26, 22) 1007 #define HAL_REO_ENTR_RING_INFO0_FRAMELESS_BAR BIT(27) 1008 1009 #define HAL_REO_ENTR_RING_INFO1_RXDMA_PUSH_REASON GENMASK(1, 0) 1010 #define HAL_REO_ENTR_RING_INFO1_RXDMA_ERROR_CODE GENMASK(6, 2) 1011 #define HAL_REO_ENTR_RING_INFO1_MPDU_FRAG_NUM GENMASK(10, 7) 1012 #define HAL_REO_ENTR_RING_INFO1_SW_EXCEPTION BIT(11) 1013 #define HAL_REO_ENTR_RING_INFO1_SW_EXCEPT_MPDU_DELINK BIT(12) 1014 #define HAL_REO_ENTR_RING_INFO1_SW_EXCEPTION_RING_VLD BIT(13) 1015 #define HAL_REO_ENTR_RING_INFO1_SW_EXCEPTION_RING GENMASK(18, 14) 1016 #define HAL_REO_ENTR_RING_INFO1_MPDU_SEQ_NUM GENMASK(30, 19) 1017 1018 #define HAL_REO_ENTR_RING_INFO2_PHY_PPDU_ID GENMASK(15, 0) 1019 #define HAL_REO_ENTR_RING_INFO2_SRC_LINK_ID GENMASK(18, 16) 1020 #define HAL_REO_ENTR_RING_INFO2_RING_ID GENMASK(27, 20) 1021 #define HAL_REO_ENTR_RING_INFO2_LOOPING_COUNT GENMASK(31, 28) 1022 1023 struct hal_reo_entrance_ring { 1024 struct ath12k_buffer_addr buf_addr_info; 1025 struct rx_mpdu_desc rx_mpdu_info; 1026 __le32 queue_addr_lo; 1027 __le32 info0; /* %HAL_REO_ENTR_RING_INFO0_ */ 1028 __le32 info1; /* %HAL_REO_ENTR_RING_INFO1_ */ 1029 __le32 info2; /* %HAL_REO_DEST_RING_INFO2_ */ 1030 1031 } __packed; 1032 1033 /* hal_reo_entrance_ring 1034 * 1035 * Producer: RXDMA 1036 * Consumer: REO 1037 * 1038 * buf_addr_info 1039 * Details of the physical address of a buffer or MSDU 1040 * link descriptor. 1041 * 1042 * rx_mpdu_info 1043 * General information related to the MPDU that is passed 1044 * on from REO entrance ring to the REO destination ring. 1045 * 1046 * queue_addr_lo 1047 * Address (lower 32 bits) of the REO queue descriptor. 1048 * 1049 * queue_addr_hi 1050 * Address (upper 8 bits) of the REO queue descriptor. 1051 * 1052 * mpdu_byte_count 1053 * An approximation of the number of bytes received in this MPDU. 1054 * Used to keeps stats on the amount of data flowing 1055 * through a queue. 1056 * 1057 * reo_destination_indication 1058 * The id of the reo exit ring where the msdu frame shall push 1059 * after (MPDU level) reordering has finished. Values are defined 1060 * in enum %HAL_RX_MSDU_DESC_REO_DEST_IND_. 1061 * 1062 * frameless_bar 1063 * Indicates that this REO entrance ring struct contains BAR info 1064 * from a multi TID BAR frame. The original multi TID BAR frame 1065 * itself contained all the REO info for the first TID, but all 1066 * the subsequent TID info and their linkage to the REO descriptors 1067 * is passed down as 'frameless' BAR info. 1068 * 1069 * The only fields valid in this descriptor when this bit is set 1070 * are queue_addr_lo, queue_addr_hi, mpdu_sequence_number, 1071 * bar_frame and peer_meta_data. 1072 * 1073 * rxdma_push_reason 1074 * Reason for pushing this frame to this exit ring. Values are 1075 * defined in enum %HAL_REO_ENTR_RING_RXDMA_PUSH_REASON_. 1076 * 1077 * rxdma_error_code 1078 * Valid only when 'push_reason' is set. All error codes are 1079 * defined in enum %HAL_REO_ENTR_RING_RXDMA_ECODE_. 1080 * 1081 * mpdu_fragment_number 1082 * Field only valid when Reo_level_mpdu_frame_info. 1083 * Rx_mpdu_desc_info_details.Fragment_flag is set. 1084 * 1085 * sw_exception 1086 * When not set, REO is performing all its default MPDU processing 1087 * operations, 1088 * When set, this REO entrance descriptor is generated by FW, and 1089 * should be processed as an exception. This implies: 1090 * NO re-order function is needed. 1091 * MPDU delinking is determined by the setting of field 1092 * SW_excection_mpdu_delink 1093 * 1094 * sw_exception_mpdu_delink 1095 * Field only valid when SW_exception is set. 1096 * 1'b0: REO should NOT delink the MPDU, and thus pass this 1097 * MPDU on to the destination ring as is. This implies that 1098 * in the REO_DESTINATION_RING struct field 1099 * Buf_or_link_desc_addr_info should point to an MSDU link 1100 * descriptor 1101 * 1'b1: REO should perform the normal MPDU delink into MSDU operations. 1102 * 1103 * sw_exception_dest_ring 1104 * Field only valid when fields SW_exception and SW 1105 * exception_destination_ring_valid are set. values are defined 1106 * in %HAL_RX_REO_DEST_RING_. 1107 * 1108 * mpdu_seq_number 1109 * The field can have two different meanings based on the setting 1110 * of sub-field Reo level mpdu frame info. 1111 * Rx_mpdu_desc_info_details. BAR_frame 1112 * 'BAR_frame' is NOT set: 1113 * The MPDU sequence number of the received frame. 1114 * 'BAR_frame' is set. 1115 * The MPDU Start sequence number from the BAR frame 1116 * 1117 * phy_ppdu_id 1118 * A PPDU counter value that PHY increments for every PPDU received 1119 * 1120 * src_link_id 1121 * Set to the link ID of the PMAC that received the frame 1122 * 1123 * ring_id 1124 * The buffer pointer ring id. 1125 * 0 - Idle ring 1126 * 1 - N refers to other rings. 1127 * 1128 * looping_count 1129 * Indicates the number of times the producer of entries into 1130 * this ring has looped around the ring. 1131 */ 1132 1133 #define HAL_REO_CMD_HDR_INFO0_CMD_NUMBER GENMASK(15, 0) 1134 #define HAL_REO_CMD_HDR_INFO0_STATUS_REQUIRED BIT(16) 1135 1136 struct hal_reo_cmd_hdr { 1137 __le32 info0; 1138 } __packed; 1139 1140 #define HAL_REO_GET_QUEUE_STATS_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) 1141 #define HAL_REO_GET_QUEUE_STATS_INFO0_CLEAR_STATS BIT(8) 1142 1143 struct hal_reo_get_queue_stats { 1144 struct hal_reo_cmd_hdr cmd; 1145 __le32 queue_addr_lo; 1146 __le32 info0; 1147 __le32 rsvd0[6]; 1148 __le32 tlv64_pad; 1149 } __packed; 1150 1151 /* hal_reo_get_queue_stats 1152 * Producer: SW 1153 * Consumer: REO 1154 * 1155 * cmd 1156 * Details for command execution tracking purposes. 1157 * 1158 * queue_addr_lo 1159 * Address (lower 32 bits) of the REO queue descriptor. 1160 * 1161 * queue_addr_hi 1162 * Address (upper 8 bits) of the REO queue descriptor. 1163 * 1164 * clear_stats 1165 * Clear stats settings. When set, Clear the stats after 1166 * generating the status. 1167 * 1168 * Following stats will be cleared. 1169 * Timeout_count 1170 * Forward_due_to_bar_count 1171 * Duplicate_count 1172 * Frames_in_order_count 1173 * BAR_received_count 1174 * MPDU_Frames_processed_count 1175 * MSDU_Frames_processed_count 1176 * Total_processed_byte_count 1177 * Late_receive_MPDU_count 1178 * window_jump_2k 1179 * Hole_count 1180 */ 1181 1182 #define HAL_REO_FLUSH_QUEUE_INFO0_DESC_ADDR_HI GENMASK(7, 0) 1183 #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_DESC_ADDR BIT(8) 1184 #define HAL_REO_FLUSH_QUEUE_INFO0_BLOCK_RESRC_IDX GENMASK(10, 9) 1185 1186 struct hal_reo_flush_queue { 1187 struct hal_reo_cmd_hdr cmd; 1188 __le32 desc_addr_lo; 1189 __le32 info0; 1190 __le32 rsvd0[6]; 1191 } __packed; 1192 1193 #define HAL_REO_FLUSH_CACHE_INFO0_CACHE_ADDR_HI GENMASK(7, 0) 1194 #define HAL_REO_FLUSH_CACHE_INFO0_FWD_ALL_MPDUS BIT(8) 1195 #define HAL_REO_FLUSH_CACHE_INFO0_RELEASE_BLOCK_IDX BIT(9) 1196 #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_RESRC_IDX GENMASK(11, 10) 1197 #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_WO_INVALIDATE BIT(12) 1198 #define HAL_REO_FLUSH_CACHE_INFO0_BLOCK_CACHE_USAGE BIT(13) 1199 #define HAL_REO_FLUSH_CACHE_INFO0_FLUSH_ALL BIT(14) 1200 1201 struct hal_reo_flush_cache { 1202 struct hal_reo_cmd_hdr cmd; 1203 __le32 cache_addr_lo; 1204 __le32 info0; 1205 __le32 rsvd0[6]; 1206 } __packed; 1207 1208 #define HAL_TCL_DATA_CMD_INFO0_CMD_TYPE BIT(0) 1209 #define HAL_TCL_DATA_CMD_INFO0_DESC_TYPE BIT(1) 1210 #define HAL_TCL_DATA_CMD_INFO0_BANK_ID GENMASK(7, 2) 1211 #define HAL_TCL_DATA_CMD_INFO0_TX_NOTIFY_FRAME GENMASK(10, 8) 1212 #define HAL_TCL_DATA_CMD_INFO0_HDR_LEN_READ_SEL BIT(11) 1213 #define HAL_TCL_DATA_CMD_INFO0_BUF_TIMESTAMP GENMASK(30, 12) 1214 #define HAL_TCL_DATA_CMD_INFO0_BUF_TIMESTAMP_VLD BIT(31) 1215 1216 #define HAL_TCL_DATA_CMD_INFO1_CMD_NUM GENMASK(31, 16) 1217 1218 #define HAL_TCL_DATA_CMD_INFO2_DATA_LEN GENMASK(15, 0) 1219 #define HAL_TCL_DATA_CMD_INFO2_IP4_CKSUM_EN BIT(16) 1220 #define HAL_TCL_DATA_CMD_INFO2_UDP4_CKSUM_EN BIT(17) 1221 #define HAL_TCL_DATA_CMD_INFO2_UDP6_CKSUM_EN BIT(18) 1222 #define HAL_TCL_DATA_CMD_INFO2_TCP4_CKSUM_EN BIT(19) 1223 #define HAL_TCL_DATA_CMD_INFO2_TCP6_CKSUM_EN BIT(20) 1224 #define HAL_TCL_DATA_CMD_INFO2_TO_FW BIT(21) 1225 #define HAL_TCL_DATA_CMD_INFO2_PKT_OFFSET GENMASK(31, 23) 1226 1227 #define HAL_TCL_DATA_CMD_INFO3_TID_OVERWRITE BIT(0) 1228 #define HAL_TCL_DATA_CMD_INFO3_FLOW_OVERRIDE_EN BIT(1) 1229 #define HAL_TCL_DATA_CMD_INFO3_CLASSIFY_INFO_SEL GENMASK(3, 2) 1230 #define HAL_TCL_DATA_CMD_INFO3_TID GENMASK(7, 4) 1231 #define HAL_TCL_DATA_CMD_INFO3_FLOW_OVERRIDE BIT(8) 1232 #define HAL_TCL_DATA_CMD_INFO3_PMAC_ID GENMASK(10, 9) 1233 #define HAL_TCL_DATA_CMD_INFO3_MSDU_COLOR GENMASK(12, 11) 1234 #define HAL_TCL_DATA_CMD_INFO3_VDEV_ID GENMASK(31, 24) 1235 1236 #define HAL_TCL_DATA_CMD_INFO4_SEARCH_INDEX GENMASK(19, 0) 1237 #define HAL_TCL_DATA_CMD_INFO4_CACHE_SET_NUM GENMASK(23, 20) 1238 #define HAL_TCL_DATA_CMD_INFO4_IDX_LOOKUP_OVERRIDE BIT(24) 1239 1240 #define HAL_TCL_DATA_CMD_INFO5_RING_ID GENMASK(27, 20) 1241 #define HAL_TCL_DATA_CMD_INFO5_LOOPING_COUNT GENMASK(31, 28) 1242 1243 enum hal_encrypt_type { 1244 HAL_ENCRYPT_TYPE_WEP_40, 1245 HAL_ENCRYPT_TYPE_WEP_104, 1246 HAL_ENCRYPT_TYPE_TKIP_NO_MIC, 1247 HAL_ENCRYPT_TYPE_WEP_128, 1248 HAL_ENCRYPT_TYPE_TKIP_MIC, 1249 HAL_ENCRYPT_TYPE_WAPI, 1250 HAL_ENCRYPT_TYPE_CCMP_128, 1251 HAL_ENCRYPT_TYPE_OPEN, 1252 HAL_ENCRYPT_TYPE_CCMP_256, 1253 HAL_ENCRYPT_TYPE_GCMP_128, 1254 HAL_ENCRYPT_TYPE_AES_GCMP_256, 1255 HAL_ENCRYPT_TYPE_WAPI_GCM_SM4, 1256 }; 1257 1258 enum hal_tcl_encap_type { 1259 HAL_TCL_ENCAP_TYPE_RAW, 1260 HAL_TCL_ENCAP_TYPE_NATIVE_WIFI, 1261 HAL_TCL_ENCAP_TYPE_ETHERNET, 1262 HAL_TCL_ENCAP_TYPE_802_3 = 3, 1263 }; 1264 1265 enum hal_tcl_desc_type { 1266 HAL_TCL_DESC_TYPE_BUFFER, 1267 HAL_TCL_DESC_TYPE_EXT_DESC, 1268 }; 1269 1270 enum hal_wbm_htt_tx_comp_status { 1271 HAL_WBM_REL_HTT_TX_COMP_STATUS_OK, 1272 HAL_WBM_REL_HTT_TX_COMP_STATUS_DROP, 1273 HAL_WBM_REL_HTT_TX_COMP_STATUS_TTL, 1274 HAL_WBM_REL_HTT_TX_COMP_STATUS_REINJ, 1275 HAL_WBM_REL_HTT_TX_COMP_STATUS_INSPECT, 1276 HAL_WBM_REL_HTT_TX_COMP_STATUS_MEC_NOTIFY, 1277 HAL_WBM_REL_HTT_TX_COMP_STATUS_MAX, 1278 }; 1279 1280 struct hal_tcl_data_cmd { 1281 struct ath12k_buffer_addr buf_addr_info; 1282 __le32 info0; 1283 __le32 info1; 1284 __le32 info2; 1285 __le32 info3; 1286 __le32 info4; 1287 __le32 info5; 1288 } __packed; 1289 1290 /* hal_tcl_data_cmd 1291 * 1292 * buf_addr_info 1293 * Details of the physical address of a buffer or MSDU 1294 * link descriptor. 1295 * 1296 * tcl_cmd_type 1297 * used to select the type of TCL Command decriptor 1298 * 1299 * desc_type 1300 * Indicates the type of address provided in the buf_addr_info. 1301 * Values are defined in enum %HAL_REO_DEST_RING_BUFFER_TYPE_. 1302 * 1303 * bank_id 1304 * used to select one of the TCL register banks for fields removed 1305 * from 'TCL_DATA_CMD' that do not change often within one virtual 1306 * device or a set of virtual devices: 1307 * 1308 * tx_notify_frame 1309 * TCL copies this value to 'TQM_ENTRANCE_RING' field FW_tx_notify_frame. 1310 * 1311 * hdr_length_read_sel 1312 * used to select the per 'encap_type' register set for MSDU header 1313 * read length 1314 * 1315 * buffer_timestamp 1316 * buffer_timestamp_valid 1317 * Frame system entrance timestamp. It shall be filled by first 1318 * module (SW, TCL or TQM) that sees the frames first. 1319 * 1320 * cmd_num 1321 * This number can be used to match against status. 1322 * 1323 * data_length 1324 * MSDU length in case of direct descriptor. Length of link 1325 * extension descriptor in case of Link extension descriptor. 1326 * 1327 * *_checksum_en 1328 * Enable checksum replacement for ipv4, udp_over_ipv4, ipv6, 1329 * udp_over_ipv6, tcp_over_ipv4 and tcp_over_ipv6. 1330 * 1331 * to_fw 1332 * Forward packet to FW along with classification result. The 1333 * packet will not be forward to TQM when this bit is set. 1334 * 1'b0: Use classification result to forward the packet. 1335 * 1'b1: Override classification result & forward packet only to fw 1336 * 1337 * packet_offset 1338 * Packet offset from Metadata in case of direct buffer descriptor. 1339 * 1340 * hlos_tid_overwrite 1341 * 1342 * When set, TCL shall ignore the IP DSCP and VLAN PCP 1343 * fields and use HLOS_TID as the final TID. Otherwise TCL 1344 * shall consider the DSCP and PCP fields as well as HLOS_TID 1345 * and choose a final TID based on the configured priority 1346 * 1347 * flow_override_enable 1348 * TCL uses this to select the flow pointer from the peer table, 1349 * which can be overridden by SW for pre-encrypted raw WiFi packets 1350 * that cannot be parsed for UDP or for other MLO 1351 * 0 - FP_PARSE_IP: Use the flow-pointer based on parsing the IPv4 1352 * or IPv6 header. 1353 * 1 - FP_USE_OVERRIDE: Use the who_classify_info_sel and 1354 * flow_override fields to select the flow-pointer 1355 * 1356 * who_classify_info_sel 1357 * Field only valid when flow_override_enable is set to FP_USE_OVERRIDE. 1358 * This field is used to select one of the 'WHO_CLASSIFY_INFO's in the 1359 * peer table in case more than 2 flows are mapped to a single TID. 1360 * 0: To choose Flow 0 and 1 of any TID use this value. 1361 * 1: To choose Flow 2 and 3 of any TID use this value. 1362 * 2: To choose Flow 4 and 5 of any TID use this value. 1363 * 3: To choose Flow 6 and 7 of any TID use this value. 1364 * 1365 * If who_classify_info sel is not in sync with the num_tx_classify_info 1366 * field from address search, then TCL will set 'who_classify_info_sel' 1367 * to 0 use flows 0 and 1. 1368 * 1369 * hlos_tid 1370 * HLOS MSDU priority 1371 * Field is used when HLOS_TID_overwrite is set. 1372 * 1373 * flow_override 1374 * Field only valid when flow_override_enable is set to FP_USE_OVERRIDE 1375 * TCL uses this to select the flow pointer from the peer table, 1376 * which can be overridden by SW for pre-encrypted raw WiFi packets 1377 * that cannot be parsed for UDP or for other MLO 1378 * 0 - FP_USE_NON_UDP: Use the non-UDP flow pointer (flow 0) 1379 * 1 - FP_USE_UDP: Use the UDP flow pointer (flow 1) 1380 * 1381 * pmac_id 1382 * TCL uses this PMAC_ID in address search, i.e, while 1383 * finding matching entry for the packet in AST corresponding 1384 * to given PMAC_ID 1385 * 1386 * If PMAC ID is all 1s (=> value 3), it indicates wildcard 1387 * match for any PMAC 1388 * 1389 * vdev_id 1390 * Virtual device ID to check against the address search entry to 1391 * avoid security issues from transmitting packets from an incorrect 1392 * virtual device 1393 * 1394 * search_index 1395 * The index that will be used for index based address or 1396 * flow search. The field is valid when 'search_type' is 1 or 2. 1397 * 1398 * cache_set_num 1399 * 1400 * Cache set number that should be used to cache the index 1401 * based search results, for address and flow search. This 1402 * value should be equal to LSB four bits of the hash value of 1403 * match data, in case of search index points to an entry which 1404 * may be used in content based search also. The value can be 1405 * anything when the entry pointed by search index will not be 1406 * used for content based search. 1407 * 1408 * index_loop_override 1409 * When set, address search and packet routing is forced to use 1410 * 'search_index' instead of following the register configuration 1411 * seleced by Bank_id. 1412 * 1413 * ring_id 1414 * The buffer pointer ring ID. 1415 * 0 refers to the IDLE ring 1416 * 1 - N refers to other rings 1417 * 1418 * looping_count 1419 * 1420 * A count value that indicates the number of times the 1421 * producer of entries into the Ring has looped around the 1422 * ring. 1423 * 1424 * At initialization time, this value is set to 0. On the 1425 * first loop, this value is set to 1. After the max value is 1426 * reached allowed by the number of bits for this field, the 1427 * count value continues with 0 again. 1428 * 1429 * In case SW is the consumer of the ring entries, it can 1430 * use this field to figure out up to where the producer of 1431 * entries has created new entries. This eliminates the need to 1432 * check where the head pointer' of the ring is located once 1433 * the SW starts processing an interrupt indicating that new 1434 * entries have been put into this ring... 1435 * 1436 * Also note that SW if it wants only needs to look at the 1437 * LSB bit of this count value. 1438 */ 1439 1440 #define HAL_TCL_DESC_LEN sizeof(struct hal_tcl_data_cmd) 1441 1442 #define HAL_TX_MSDU_EXT_INFO0_BUF_PTR_LO GENMASK(31, 0) 1443 1444 #define HAL_TX_MSDU_EXT_INFO1_BUF_PTR_HI GENMASK(7, 0) 1445 #define HAL_TX_MSDU_EXT_INFO1_EXTN_OVERRIDE BIT(8) 1446 #define HAL_TX_MSDU_EXT_INFO1_ENCAP_TYPE GENMASK(10, 9) 1447 #define HAL_TX_MSDU_EXT_INFO1_ENCRYPT_TYPE GENMASK(14, 11) 1448 #define HAL_TX_MSDU_EXT_INFO1_BUF_LEN GENMASK(31, 16) 1449 1450 struct hal_tx_msdu_ext_desc { 1451 __le32 rsvd0[6]; 1452 __le32 info0; 1453 __le32 info1; 1454 __le32 rsvd1[10]; 1455 }; 1456 1457 struct hal_tcl_gse_cmd { 1458 __le32 ctrl_buf_addr_lo; 1459 __le32 info0; 1460 __le32 meta_data[2]; 1461 __le32 rsvd0[2]; 1462 __le32 info1; 1463 } __packed; 1464 1465 /* hal_tcl_gse_cmd 1466 * 1467 * ctrl_buf_addr_lo, ctrl_buf_addr_hi 1468 * Address of a control buffer containing additional info needed 1469 * for this command execution. 1470 * 1471 * meta_data 1472 * Meta data to be returned in the status descriptor 1473 */ 1474 1475 enum hal_tcl_cache_op_res { 1476 HAL_TCL_CACHE_OP_RES_DONE, 1477 HAL_TCL_CACHE_OP_RES_NOT_FOUND, 1478 HAL_TCL_CACHE_OP_RES_TIMEOUT, 1479 }; 1480 1481 struct hal_tcl_status_ring { 1482 __le32 info0; 1483 __le32 msdu_byte_count; 1484 __le32 msdu_timestamp; 1485 __le32 meta_data[2]; 1486 __le32 info1; 1487 __le32 rsvd0; 1488 __le32 info2; 1489 } __packed; 1490 1491 /* hal_tcl_status_ring 1492 * 1493 * msdu_cnt 1494 * msdu_byte_count 1495 * MSDU count of Entry and MSDU byte count for entry 1. 1496 * 1497 */ 1498 1499 #define HAL_CE_SRC_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) 1500 #define HAL_CE_SRC_DESC_ADDR_INFO_HASH_EN BIT(8) 1501 #define HAL_CE_SRC_DESC_ADDR_INFO_BYTE_SWAP BIT(9) 1502 #define HAL_CE_SRC_DESC_ADDR_INFO_DEST_SWAP BIT(10) 1503 #define HAL_CE_SRC_DESC_ADDR_INFO_GATHER BIT(11) 1504 #define HAL_CE_SRC_DESC_ADDR_INFO_LEN GENMASK(31, 16) 1505 1506 #define HAL_CE_SRC_DESC_META_INFO_DATA GENMASK(15, 0) 1507 1508 #define HAL_CE_SRC_DESC_FLAGS_RING_ID GENMASK(27, 20) 1509 #define HAL_CE_SRC_DESC_FLAGS_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT 1510 1511 struct hal_ce_srng_src_desc { 1512 __le32 buffer_addr_low; 1513 __le32 buffer_addr_info; /* %HAL_CE_SRC_DESC_ADDR_INFO_ */ 1514 __le32 meta_info; /* %HAL_CE_SRC_DESC_META_INFO_ */ 1515 __le32 flags; /* %HAL_CE_SRC_DESC_FLAGS_ */ 1516 } __packed; 1517 1518 /* hal_ce_srng_src_desc 1519 * 1520 * buffer_addr_lo 1521 * LSB 32 bits of the 40 Bit Pointer to the source buffer 1522 * 1523 * buffer_addr_hi 1524 * MSB 8 bits of the 40 Bit Pointer to the source buffer 1525 * 1526 * toeplitz_en 1527 * Enable generation of 32-bit Toeplitz-LFSR hash for 1528 * data transfer. In case of gather field in first source 1529 * ring entry of the gather copy cycle in taken into account. 1530 * 1531 * src_swap 1532 * Treats source memory organization as big-endian. For 1533 * each dword read (4 bytes), the byte 0 is swapped with byte 3 1534 * and byte 1 is swapped with byte 2. 1535 * In case of gather field in first source ring entry of 1536 * the gather copy cycle in taken into account. 1537 * 1538 * dest_swap 1539 * Treats destination memory organization as big-endian. 1540 * For each dword write (4 bytes), the byte 0 is swapped with 1541 * byte 3 and byte 1 is swapped with byte 2. 1542 * In case of gather field in first source ring entry of 1543 * the gather copy cycle in taken into account. 1544 * 1545 * gather 1546 * Enables gather of multiple copy engine source 1547 * descriptors to one destination. 1548 * 1549 * ce_res_0 1550 * Reserved 1551 * 1552 * 1553 * length 1554 * Length of the buffer in units of octets of the current 1555 * descriptor 1556 * 1557 * fw_metadata 1558 * Meta data used by FW. 1559 * In case of gather field in first source ring entry of 1560 * the gather copy cycle in taken into account. 1561 * 1562 * ce_res_1 1563 * Reserved 1564 * 1565 * ce_res_2 1566 * Reserved 1567 * 1568 * ring_id 1569 * The buffer pointer ring ID. 1570 * 0 refers to the IDLE ring 1571 * 1 - N refers to other rings 1572 * Helps with debugging when dumping ring contents. 1573 * 1574 * looping_count 1575 * A count value that indicates the number of times the 1576 * producer of entries into the Ring has looped around the 1577 * ring. 1578 * 1579 * At initialization time, this value is set to 0. On the 1580 * first loop, this value is set to 1. After the max value is 1581 * reached allowed by the number of bits for this field, the 1582 * count value continues with 0 again. 1583 * 1584 * In case SW is the consumer of the ring entries, it can 1585 * use this field to figure out up to where the producer of 1586 * entries has created new entries. This eliminates the need to 1587 * check where the head pointer' of the ring is located once 1588 * the SW starts processing an interrupt indicating that new 1589 * entries have been put into this ring... 1590 * 1591 * Also note that SW if it wants only needs to look at the 1592 * LSB bit of this count value. 1593 */ 1594 1595 #define HAL_CE_DEST_DESC_ADDR_INFO_ADDR_HI GENMASK(7, 0) 1596 #define HAL_CE_DEST_DESC_ADDR_INFO_RING_ID GENMASK(27, 20) 1597 #define HAL_CE_DEST_DESC_ADDR_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT 1598 1599 struct hal_ce_srng_dest_desc { 1600 __le32 buffer_addr_low; 1601 __le32 buffer_addr_info; /* %HAL_CE_DEST_DESC_ADDR_INFO_ */ 1602 } __packed; 1603 1604 /* hal_ce_srng_dest_desc 1605 * 1606 * dst_buffer_low 1607 * LSB 32 bits of the 40 Bit Pointer to the Destination 1608 * buffer 1609 * 1610 * dst_buffer_high 1611 * MSB 8 bits of the 40 Bit Pointer to the Destination 1612 * buffer 1613 * 1614 * ce_res_4 1615 * Reserved 1616 * 1617 * ring_id 1618 * The buffer pointer ring ID. 1619 * 0 refers to the IDLE ring 1620 * 1 - N refers to other rings 1621 * Helps with debugging when dumping ring contents. 1622 * 1623 * looping_count 1624 * A count value that indicates the number of times the 1625 * producer of entries into the Ring has looped around the 1626 * ring. 1627 * 1628 * At initialization time, this value is set to 0. On the 1629 * first loop, this value is set to 1. After the max value is 1630 * reached allowed by the number of bits for this field, the 1631 * count value continues with 0 again. 1632 * 1633 * In case SW is the consumer of the ring entries, it can 1634 * use this field to figure out up to where the producer of 1635 * entries has created new entries. This eliminates the need to 1636 * check where the head pointer' of the ring is located once 1637 * the SW starts processing an interrupt indicating that new 1638 * entries have been put into this ring... 1639 * 1640 * Also note that SW if it wants only needs to look at the 1641 * LSB bit of this count value. 1642 */ 1643 1644 #define HAL_CE_DST_STATUS_DESC_FLAGS_HASH_EN BIT(8) 1645 #define HAL_CE_DST_STATUS_DESC_FLAGS_BYTE_SWAP BIT(9) 1646 #define HAL_CE_DST_STATUS_DESC_FLAGS_DEST_SWAP BIT(10) 1647 #define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER BIT(11) 1648 #define HAL_CE_DST_STATUS_DESC_FLAGS_LEN GENMASK(31, 16) 1649 1650 #define HAL_CE_DST_STATUS_DESC_META_INFO_DATA GENMASK(15, 0) 1651 #define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID GENMASK(27, 20) 1652 #define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT 1653 1654 struct hal_ce_srng_dst_status_desc { 1655 __le32 flags; /* %HAL_CE_DST_STATUS_DESC_FLAGS_ */ 1656 __le32 toeplitz_hash0; 1657 __le32 toeplitz_hash1; 1658 __le32 meta_info; /* HAL_CE_DST_STATUS_DESC_META_INFO_ */ 1659 } __packed; 1660 1661 /* hal_ce_srng_dst_status_desc 1662 * 1663 * ce_res_5 1664 * Reserved 1665 * 1666 * toeplitz_en 1667 * 1668 * src_swap 1669 * Source memory buffer swapped 1670 * 1671 * dest_swap 1672 * Destination memory buffer swapped 1673 * 1674 * gather 1675 * Gather of multiple copy engine source descriptors to one 1676 * destination enabled 1677 * 1678 * ce_res_6 1679 * Reserved 1680 * 1681 * length 1682 * Sum of all the Lengths of the source descriptor in the 1683 * gather chain 1684 * 1685 * toeplitz_hash_0 1686 * 32 LS bits of 64 bit Toeplitz LFSR hash result 1687 * 1688 * toeplitz_hash_1 1689 * 32 MS bits of 64 bit Toeplitz LFSR hash result 1690 * 1691 * fw_metadata 1692 * Meta data used by FW 1693 * In case of gather field in first source ring entry of 1694 * the gather copy cycle in taken into account. 1695 * 1696 * ce_res_7 1697 * Reserved 1698 * 1699 * ring_id 1700 * The buffer pointer ring ID. 1701 * 0 refers to the IDLE ring 1702 * 1 - N refers to other rings 1703 * Helps with debugging when dumping ring contents. 1704 * 1705 * looping_count 1706 * A count value that indicates the number of times the 1707 * producer of entries into the Ring has looped around the 1708 * ring. 1709 * 1710 * At initialization time, this value is set to 0. On the 1711 * first loop, this value is set to 1. After the max value is 1712 * reached allowed by the number of bits for this field, the 1713 * count value continues with 0 again. 1714 * 1715 * In case SW is the consumer of the ring entries, it can 1716 * use this field to figure out up to where the producer of 1717 * entries has created new entries. This eliminates the need to 1718 * check where the head pointer' of the ring is located once 1719 * the SW starts processing an interrupt indicating that new 1720 * entries have been put into this ring... 1721 * 1722 * Also note that SW if it wants only needs to look at the 1723 * LSB bit of this count value. 1724 */ 1725 1726 #define HAL_TX_RATE_STATS_INFO0_VALID BIT(0) 1727 #define HAL_TX_RATE_STATS_INFO0_BW GENMASK(3, 1) 1728 #define HAL_TX_RATE_STATS_INFO0_PKT_TYPE GENMASK(7, 4) 1729 #define HAL_TX_RATE_STATS_INFO0_STBC BIT(8) 1730 #define HAL_TX_RATE_STATS_INFO0_LDPC BIT(9) 1731 #define HAL_TX_RATE_STATS_INFO0_SGI GENMASK(11, 10) 1732 #define HAL_TX_RATE_STATS_INFO0_MCS GENMASK(15, 12) 1733 #define HAL_TX_RATE_STATS_INFO0_OFDMA_TX BIT(16) 1734 #define HAL_TX_RATE_STATS_INFO0_TONES_IN_RU GENMASK(28, 17) 1735 1736 enum hal_tx_rate_stats_bw { 1737 HAL_TX_RATE_STATS_BW_20, 1738 HAL_TX_RATE_STATS_BW_40, 1739 HAL_TX_RATE_STATS_BW_80, 1740 HAL_TX_RATE_STATS_BW_160, 1741 }; 1742 1743 enum hal_tx_rate_stats_pkt_type { 1744 HAL_TX_RATE_STATS_PKT_TYPE_11A, 1745 HAL_TX_RATE_STATS_PKT_TYPE_11B, 1746 HAL_TX_RATE_STATS_PKT_TYPE_11N, 1747 HAL_TX_RATE_STATS_PKT_TYPE_11AC, 1748 HAL_TX_RATE_STATS_PKT_TYPE_11AX, 1749 HAL_TX_RATE_STATS_PKT_TYPE_11BA, 1750 HAL_TX_RATE_STATS_PKT_TYPE_11BE, 1751 }; 1752 1753 enum hal_tx_rate_stats_sgi { 1754 HAL_TX_RATE_STATS_SGI_08US, 1755 HAL_TX_RATE_STATS_SGI_04US, 1756 HAL_TX_RATE_STATS_SGI_16US, 1757 HAL_TX_RATE_STATS_SGI_32US, 1758 }; 1759 1760 struct hal_tx_rate_stats { 1761 __le32 info0; 1762 __le32 tsf; 1763 } __packed; 1764 1765 struct hal_wbm_link_desc { 1766 struct ath12k_buffer_addr buf_addr_info; 1767 } __packed; 1768 1769 /* hal_wbm_link_desc 1770 * 1771 * Producer: WBM 1772 * Consumer: WBM 1773 * 1774 * buf_addr_info 1775 * Details of the physical address of a buffer or MSDU 1776 * link descriptor. 1777 */ 1778 1779 enum hal_wbm_rel_src_module { 1780 HAL_WBM_REL_SRC_MODULE_TQM, 1781 HAL_WBM_REL_SRC_MODULE_RXDMA, 1782 HAL_WBM_REL_SRC_MODULE_REO, 1783 HAL_WBM_REL_SRC_MODULE_FW, 1784 HAL_WBM_REL_SRC_MODULE_SW, 1785 }; 1786 1787 enum hal_wbm_rel_desc_type { 1788 HAL_WBM_REL_DESC_TYPE_REL_MSDU, 1789 HAL_WBM_REL_DESC_TYPE_MSDU_LINK, 1790 HAL_WBM_REL_DESC_TYPE_MPDU_LINK, 1791 HAL_WBM_REL_DESC_TYPE_MSDU_EXT, 1792 HAL_WBM_REL_DESC_TYPE_QUEUE_EXT, 1793 }; 1794 1795 /* hal_wbm_rel_desc_type 1796 * 1797 * msdu_buffer 1798 * The address points to an MSDU buffer 1799 * 1800 * msdu_link_descriptor 1801 * The address points to an Tx MSDU link descriptor 1802 * 1803 * mpdu_link_descriptor 1804 * The address points to an MPDU link descriptor 1805 * 1806 * msdu_ext_descriptor 1807 * The address points to an MSDU extension descriptor 1808 * 1809 * queue_ext_descriptor 1810 * The address points to an TQM queue extension descriptor. WBM should 1811 * treat this is the same way as a link descriptor. 1812 */ 1813 1814 enum hal_wbm_rel_bm_act { 1815 HAL_WBM_REL_BM_ACT_PUT_IN_IDLE, 1816 HAL_WBM_REL_BM_ACT_REL_MSDU, 1817 }; 1818 1819 /* hal_wbm_rel_bm_act 1820 * 1821 * put_in_idle_list 1822 * Put the buffer or descriptor back in the idle list. In case of MSDU or 1823 * MDPU link descriptor, BM does not need to check to release any 1824 * individual MSDU buffers. 1825 * 1826 * release_msdu_list 1827 * This BM action can only be used in combination with desc_type being 1828 * msdu_link_descriptor. Field first_msdu_index points out which MSDU 1829 * pointer in the MSDU link descriptor is the first of an MPDU that is 1830 * released. BM shall release all the MSDU buffers linked to this first 1831 * MSDU buffer pointer. All related MSDU buffer pointer entries shall be 1832 * set to value 0, which represents the 'NULL' pointer. When all MSDU 1833 * buffer pointers in the MSDU link descriptor are 'NULL', the MSDU link 1834 * descriptor itself shall also be released. 1835 */ 1836 #define HAL_WBM_COMPL_RX_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1837 #define HAL_WBM_COMPL_RX_INFO0_BM_ACTION GENMASK(5, 3) 1838 #define HAL_WBM_COMPL_RX_INFO0_DESC_TYPE GENMASK(8, 6) 1839 #define HAL_WBM_COMPL_RX_INFO0_RBM GENMASK(12, 9) 1840 #define HAL_WBM_COMPL_RX_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) 1841 #define HAL_WBM_COMPL_RX_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) 1842 #define HAL_WBM_COMPL_RX_INFO0_REO_PUSH_REASON GENMASK(25, 24) 1843 #define HAL_WBM_COMPL_RX_INFO0_REO_ERROR_CODE GENMASK(30, 26) 1844 #define HAL_WBM_COMPL_RX_INFO0_WBM_INTERNAL_ERROR BIT(31) 1845 1846 #define HAL_WBM_COMPL_RX_INFO1_PHY_ADDR_HI GENMASK(7, 0) 1847 #define HAL_WBM_COMPL_RX_INFO1_SW_COOKIE GENMASK(27, 8) 1848 #define HAL_WBM_COMPL_RX_INFO1_LOOPING_COUNT GENMASK(31, 28) 1849 1850 struct hal_wbm_completion_ring_rx { 1851 __le32 addr_lo; 1852 __le32 addr_hi; 1853 __le32 info0; 1854 struct rx_mpdu_desc rx_mpdu_info; 1855 struct rx_msdu_desc rx_msdu_info; 1856 __le32 phy_addr_lo; 1857 __le32 info1; 1858 } __packed; 1859 1860 #define HAL_WBM_COMPL_TX_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1861 #define HAL_WBM_COMPL_TX_INFO0_DESC_TYPE GENMASK(8, 6) 1862 #define HAL_WBM_COMPL_TX_INFO0_RBM GENMASK(12, 9) 1863 #define HAL_WBM_COMPL_TX_INFO0_TQM_RELEASE_REASON GENMASK(16, 13) 1864 #define HAL_WBM_COMPL_TX_INFO0_RBM_OVERRIDE_VLD BIT(17) 1865 #define HAL_WBM_COMPL_TX_INFO0_SW_COOKIE_LO GENMASK(29, 18) 1866 #define HAL_WBM_COMPL_TX_INFO0_CC_DONE BIT(30) 1867 #define HAL_WBM_COMPL_TX_INFO0_WBM_INTERNAL_ERROR BIT(31) 1868 1869 #define HAL_WBM_COMPL_TX_INFO1_TQM_STATUS_NUMBER GENMASK(23, 0) 1870 #define HAL_WBM_COMPL_TX_INFO1_TRANSMIT_COUNT GENMASK(30, 24) 1871 #define HAL_WBM_COMPL_TX_INFO1_SW_REL_DETAILS_VALID BIT(31) 1872 1873 #define HAL_WBM_COMPL_TX_INFO2_ACK_FRAME_RSSI GENMASK(7, 0) 1874 #define HAL_WBM_COMPL_TX_INFO2_FIRST_MSDU BIT(8) 1875 #define HAL_WBM_COMPL_TX_INFO2_LAST_MSDU BIT(9) 1876 #define HAL_WBM_COMPL_TX_INFO2_FW_TX_NOTIF_FRAME GENMASK(12, 10) 1877 #define HAL_WBM_COMPL_TX_INFO2_BUFFER_TIMESTAMP GENMASK(31, 13) 1878 1879 #define HAL_WBM_COMPL_TX_INFO3_PEER_ID GENMASK(15, 0) 1880 #define HAL_WBM_COMPL_TX_INFO3_TID GENMASK(19, 16) 1881 #define HAL_WBM_COMPL_TX_INFO3_SW_COOKIE_HI GENMASK(27, 20) 1882 #define HAL_WBM_COMPL_TX_INFO3_LOOPING_COUNT GENMASK(31, 28) 1883 1884 struct hal_wbm_completion_ring_tx { 1885 __le32 buf_va_lo; 1886 __le32 buf_va_hi; 1887 __le32 info0; 1888 __le32 info1; 1889 __le32 info2; 1890 struct hal_tx_rate_stats rate_stats; 1891 __le32 info3; 1892 } __packed; 1893 1894 #define HAL_WBM_RELEASE_TX_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1895 #define HAL_WBM_RELEASE_TX_INFO0_BM_ACTION GENMASK(5, 3) 1896 #define HAL_WBM_RELEASE_TX_INFO0_DESC_TYPE GENMASK(8, 6) 1897 #define HAL_WBM_RELEASE_TX_INFO0_FIRST_MSDU_IDX GENMASK(12, 9) 1898 #define HAL_WBM_RELEASE_TX_INFO0_TQM_RELEASE_REASON GENMASK(18, 13) 1899 #define HAL_WBM_RELEASE_TX_INFO0_RBM_OVERRIDE_VLD BIT(17) 1900 #define HAL_WBM_RELEASE_TX_INFO0_SW_BUFFER_COOKIE_11_0 GENMASK(29, 18) 1901 #define HAL_WBM_RELEASE_TX_INFO0_WBM_INTERNAL_ERROR BIT(31) 1902 1903 #define HAL_WBM_RELEASE_TX_INFO1_TQM_STATUS_NUMBER GENMASK(23, 0) 1904 #define HAL_WBM_RELEASE_TX_INFO1_TRANSMIT_COUNT GENMASK(30, 24) 1905 #define HAL_WBM_RELEASE_TX_INFO1_SW_REL_DETAILS_VALID BIT(31) 1906 1907 #define HAL_WBM_RELEASE_TX_INFO2_ACK_FRAME_RSSI GENMASK(7, 0) 1908 #define HAL_WBM_RELEASE_TX_INFO2_FIRST_MSDU BIT(8) 1909 #define HAL_WBM_RELEASE_TX_INFO2_LAST_MSDU BIT(9) 1910 #define HAL_WBM_RELEASE_TX_INFO2_FW_TX_NOTIF_FRAME GENMASK(12, 10) 1911 #define HAL_WBM_RELEASE_TX_INFO2_BUFFER_TIMESTAMP GENMASK(31, 13) 1912 1913 #define HAL_WBM_RELEASE_TX_INFO3_PEER_ID GENMASK(15, 0) 1914 #define HAL_WBM_RELEASE_TX_INFO3_TID GENMASK(19, 16) 1915 #define HAL_WBM_RELEASE_TX_INFO3_SW_BUFFER_COOKIE_19_12 GENMASK(27, 20) 1916 #define HAL_WBM_RELEASE_TX_INFO3_LOOPING_COUNT GENMASK(31, 28) 1917 1918 struct hal_wbm_release_ring_tx { 1919 struct ath12k_buffer_addr buf_addr_info; 1920 __le32 info0; 1921 __le32 info1; 1922 __le32 info2; 1923 struct hal_tx_rate_stats rate_stats; 1924 __le32 info3; 1925 } __packed; 1926 1927 #define HAL_WBM_RELEASE_RX_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1928 #define HAL_WBM_RELEASE_RX_INFO0_BM_ACTION GENMASK(5, 3) 1929 #define HAL_WBM_RELEASE_RX_INFO0_DESC_TYPE GENMASK(8, 6) 1930 #define HAL_WBM_RELEASE_RX_INFO0_FIRST_MSDU_IDX GENMASK(12, 9) 1931 #define HAL_WBM_RELEASE_RX_INFO0_CC_STATUS BIT(16) 1932 #define HAL_WBM_RELEASE_RX_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) 1933 #define HAL_WBM_RELEASE_RX_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) 1934 #define HAL_WBM_RELEASE_RX_INFO0_REO_PUSH_REASON GENMASK(25, 24) 1935 #define HAL_WBM_RELEASE_RX_INFO0_REO_ERROR_CODE GENMASK(30, 26) 1936 #define HAL_WBM_RELEASE_RX_INFO0_WBM_INTERNAL_ERROR BIT(31) 1937 1938 #define HAL_WBM_RELEASE_RX_INFO2_RING_ID GENMASK(27, 20) 1939 #define HAL_WBM_RELEASE_RX_INFO2_LOOPING_COUNT GENMASK(31, 28) 1940 1941 struct hal_wbm_release_ring_rx { 1942 struct ath12k_buffer_addr buf_addr_info; 1943 __le32 info0; 1944 struct rx_mpdu_desc rx_mpdu_info; 1945 struct rx_msdu_desc rx_msdu_info; 1946 __le32 info1; 1947 __le32 info2; 1948 } __packed; 1949 1950 #define HAL_WBM_RELEASE_RX_CC_INFO0_RBM GENMASK(12, 9) 1951 #define HAL_WBM_RELEASE_RX_CC_INFO1_COOKIE GENMASK(27, 8) 1952 /* Used when hw cc is success */ 1953 struct hal_wbm_release_ring_cc_rx { 1954 __le32 buf_va_lo; 1955 __le32 buf_va_hi; 1956 __le32 info0; 1957 struct rx_mpdu_desc rx_mpdu_info; 1958 struct rx_msdu_desc rx_msdu_info; 1959 __le32 buf_pa_lo; 1960 __le32 info1; 1961 } __packed; 1962 1963 #define HAL_WBM_RELEASE_INFO0_REL_SRC_MODULE GENMASK(2, 0) 1964 #define HAL_WBM_RELEASE_INFO0_BM_ACTION GENMASK(5, 3) 1965 #define HAL_WBM_RELEASE_INFO0_DESC_TYPE GENMASK(8, 6) 1966 #define HAL_WBM_RELEASE_INFO0_RXDMA_PUSH_REASON GENMASK(18, 17) 1967 #define HAL_WBM_RELEASE_INFO0_RXDMA_ERROR_CODE GENMASK(23, 19) 1968 #define HAL_WBM_RELEASE_INFO0_REO_PUSH_REASON GENMASK(25, 24) 1969 #define HAL_WBM_RELEASE_INFO0_REO_ERROR_CODE GENMASK(30, 26) 1970 #define HAL_WBM_RELEASE_INFO0_WBM_INTERNAL_ERROR BIT(31) 1971 1972 #define HAL_WBM_RELEASE_INFO3_FIRST_MSDU BIT(0) 1973 #define HAL_WBM_RELEASE_INFO3_LAST_MSDU BIT(1) 1974 #define HAL_WBM_RELEASE_INFO3_CONTINUATION BIT(2) 1975 1976 #define HAL_WBM_RELEASE_INFO5_LOOPING_COUNT GENMASK(31, 28) 1977 1978 struct hal_wbm_release_ring { 1979 struct ath12k_buffer_addr buf_addr_info; 1980 __le32 info0; 1981 __le32 info1; 1982 __le32 info2; 1983 __le32 info3; 1984 __le32 info4; 1985 __le32 info5; 1986 } __packed; 1987 1988 /* hal_wbm_release_ring 1989 * 1990 * Producer: SW/TQM/RXDMA/REO/SWITCH 1991 * Consumer: WBM/SW/FW 1992 * 1993 * HTT tx status is overlayed on wbm_release ring on 4-byte words 2, 3, 4 and 5 1994 * for software based completions. 1995 * 1996 * buf_addr_info 1997 * Details of the physical address of the buffer or link descriptor. 1998 * 1999 * release_source_module 2000 * Indicates which module initiated the release of this buffer/descriptor. 2001 * Values are defined in enum %HAL_WBM_REL_SRC_MODULE_. 2002 * 2003 * buffer_or_desc_type 2004 * Field only valid when WBM is marked as the return_buffer_manager in 2005 * the Released_Buffer_address_info. Indicates that type of buffer or 2006 * descriptor is being released. Values are in enum %HAL_WBM_REL_DESC_TYPE. 2007 * 2008 * wbm_internal_error 2009 * Is set when WBM got a buffer pointer but the action was to push it to 2010 * the idle link descriptor ring or do link related activity OR 2011 * Is set when WBM got a link buffer pointer but the action was to push it 2012 * to the buffer descriptor ring. 2013 * 2014 * looping_count 2015 * A count value that indicates the number of times the 2016 * producer of entries into the Buffer Manager Ring has looped 2017 * around the ring. 2018 * 2019 * At initialization time, this value is set to 0. On the 2020 * first loop, this value is set to 1. After the max value is 2021 * reached allowed by the number of bits for this field, the 2022 * count value continues with 0 again. 2023 * 2024 * In case SW is the consumer of the ring entries, it can 2025 * use this field to figure out up to where the producer of 2026 * entries has created new entries. This eliminates the need to 2027 * check where the head pointer' of the ring is located once 2028 * the SW starts processing an interrupt indicating that new 2029 * entries have been put into this ring... 2030 * 2031 * Also note that SW if it wants only needs to look at the 2032 * LSB bit of this count value. 2033 */ 2034 2035 /** 2036 * enum hal_wbm_tqm_rel_reason - TQM release reason code 2037 * @HAL_WBM_TQM_REL_REASON_FRAME_ACKED: ACK or BACK received for the frame 2038 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU: Command remove_mpdus initiated by SW 2039 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX: Command remove transmitted_mpdus 2040 * initiated by sw. 2041 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX: Command remove untransmitted_mpdus 2042 * initiated by sw. 2043 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES: Command remove aged msdus or 2044 * mpdus. 2045 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1: Remove command initiated by 2046 * fw with fw_reason1. 2047 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2: Remove command initiated by 2048 * fw with fw_reason2. 2049 * @HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3: Remove command initiated by 2050 * fw with fw_reason3. 2051 */ 2052 enum hal_wbm_tqm_rel_reason { 2053 HAL_WBM_TQM_REL_REASON_FRAME_ACKED, 2054 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_MPDU, 2055 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_TX, 2056 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_NOTX, 2057 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_AGED_FRAMES, 2058 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON1, 2059 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON2, 2060 HAL_WBM_TQM_REL_REASON_CMD_REMOVE_RESEAON3, 2061 }; 2062 2063 struct hal_wbm_buffer_ring { 2064 struct ath12k_buffer_addr buf_addr_info; 2065 }; 2066 2067 enum hal_mon_end_reason { 2068 HAL_MON_STATUS_BUFFER_FULL, 2069 HAL_MON_FLUSH_DETECTED, 2070 HAL_MON_END_OF_PPDU, 2071 HAL_MON_PPDU_TRUNCATED, 2072 }; 2073 2074 #define HAL_SW_MONITOR_RING_INFO0_RXDMA_PUSH_REASON GENMASK(1, 0) 2075 #define HAL_SW_MONITOR_RING_INFO0_RXDMA_ERROR_CODE GENMASK(6, 2) 2076 #define HAL_SW_MONITOR_RING_INFO0_MPDU_FRAGMENT_NUMBER GENMASK(10, 7) 2077 #define HAL_SW_MONITOR_RING_INFO0_FRAMELESS_BAR BIT(11) 2078 #define HAL_SW_MONITOR_RING_INFO0_STATUS_BUF_COUNT GENMASK(15, 12) 2079 #define HAL_SW_MONITOR_RING_INFO0_END_OF_PPDU BIT(16) 2080 2081 #define HAL_SW_MONITOR_RING_INFO1_PHY_PPDU_ID GENMASK(15, 0) 2082 #define HAL_SW_MONITOR_RING_INFO1_RING_ID GENMASK(27, 20) 2083 #define HAL_SW_MONITOR_RING_INFO1_LOOPING_COUNT GENMASK(31, 28) 2084 2085 struct hal_sw_monitor_ring { 2086 struct ath12k_buffer_addr buf_addr_info; 2087 struct rx_mpdu_desc rx_mpdu_info; 2088 struct ath12k_buffer_addr status_buff_addr_info; 2089 __le32 info0; /* %HAL_SW_MONITOR_RING_INFO0 */ 2090 __le32 info1; /* %HAL_SW_MONITOR_RING_INFO1 */ 2091 } __packed; 2092 2093 /* hal_sw_monitor_ring 2094 * 2095 * Producer: RXDMA 2096 * Consumer: REO/SW/FW 2097 * buf_addr_info 2098 * Details of the physical address of a buffer or MSDU 2099 * link descriptor. 2100 * 2101 * rx_mpdu_info 2102 * Details related to the MPDU being pushed to SW, valid 2103 * only if end_of_ppdu is set to 0. 2104 * 2105 * status_buff_addr_info 2106 * Details of the physical address of the first status 2107 * buffer used for the PPDU (either the PPDU that included the 2108 * MPDU being pushed to SW if end_of_ppdu = 0, or the PPDU 2109 * whose end is indicated through end_of_ppdu = 1) 2110 * 2111 * rxdma_push_reason 2112 * Indicates why RXDMA pushed the frame to this ring 2113 * 2114 * <enum 0 rxdma_error_detected> RXDMA detected an error an 2115 * pushed this frame to this queue 2116 * 2117 * <enum 1 rxdma_routing_instruction> RXDMA pushed the 2118 * frame to this queue per received routing instructions. No 2119 * error within RXDMA was detected 2120 * 2121 * <enum 2 rxdma_rx_flush> RXDMA received an RX_FLUSH. As a 2122 * result the MSDU link descriptor might not have the 2123 * last_msdu_in_mpdu_flag set, but instead WBM might just see a 2124 * NULL pointer in the MSDU link descriptor. This is to be 2125 * considered a normal condition for this scenario. 2126 * 2127 * rxdma_error_code 2128 * Field only valid when rxdma_push_reason is set to 2129 * 'rxdma_error_detected.' 2130 * 2131 * <enum 0 rxdma_overflow_err>MPDU frame is not complete 2132 * due to a FIFO overflow error in RXPCU. 2133 * 2134 * <enum 1 rxdma_mpdu_length_err>MPDU frame is not complete 2135 * due to receiving incomplete MPDU from the PHY 2136 * 2137 * <enum 3 rxdma_decrypt_err>CRYPTO reported a decryption 2138 * error or CRYPTO received an encrypted frame, but did not get 2139 * a valid corresponding key id in the peer entry. 2140 * 2141 * <enum 4 rxdma_tkip_mic_err>CRYPTO reported a TKIP MIC 2142 * error 2143 * 2144 * <enum 5 rxdma_unecrypted_err>CRYPTO reported an 2145 * unencrypted frame error when encrypted was expected 2146 * 2147 * <enum 6 rxdma_msdu_len_err>RX OLE reported an MSDU 2148 * length error 2149 * 2150 * <enum 7 rxdma_msdu_limit_err>RX OLE reported that max 2151 * number of MSDUs allowed in an MPDU got exceeded 2152 * 2153 * <enum 8 rxdma_wifi_parse_err>RX OLE reported a parsing 2154 * error 2155 * 2156 * <enum 9 rxdma_amsdu_parse_err>RX OLE reported an A-MSDU 2157 * parsing error 2158 * 2159 * <enum 10 rxdma_sa_timeout_err>RX OLE reported a timeout 2160 * during SA search 2161 * 2162 * <enum 11 rxdma_da_timeout_err>RX OLE reported a timeout 2163 * during DA search 2164 * 2165 * <enum 12 rxdma_flow_timeout_err>RX OLE reported a 2166 * timeout during flow search 2167 * 2168 * <enum 13 rxdma_flush_request>RXDMA received a flush 2169 * request 2170 * 2171 * <enum 14 rxdma_amsdu_fragment_err>Rx PCU reported A-MSDU 2172 * present as well as a fragmented MPDU. 2173 * 2174 * mpdu_fragment_number 2175 * Field only valid when Reo_level_mpdu_frame_info. 2176 * Rx_mpdu_desc_info_details.Fragment_flag is set and 2177 * end_of_ppdu is set to 0. 2178 * 2179 * The fragment number from the 802.11 header. 2180 * 2181 * Note that the sequence number is embedded in the field: 2182 * Reo_level_mpdu_frame_info. Rx_mpdu_desc_info_details. 2183 * Mpdu_sequence_number 2184 * 2185 * frameless_bar 2186 * When set, this SW monitor ring struct contains BAR info 2187 * from a multi TID BAR frame. The original multi TID BAR frame 2188 * itself contained all the REO info for the first TID, but all 2189 * the subsequent TID info and their linkage to the REO 2190 * descriptors is passed down as 'frameless' BAR info. 2191 * 2192 * The only fields valid in this descriptor when this bit 2193 * is within the 2194 * 2195 * Reo_level_mpdu_frame_info: 2196 * Within Rx_mpdu_desc_info_details: 2197 * Mpdu_Sequence_number 2198 * BAR_frame 2199 * Peer_meta_data 2200 * All other fields shall be set to 0. 2201 * 2202 * status_buf_count 2203 * A count of status buffers used so far for the PPDU 2204 * (either the PPDU that included the MPDU being pushed to SW 2205 * if end_of_ppdu = 0, or the PPDU whose end is indicated 2206 * through end_of_ppdu = 1) 2207 * 2208 * end_of_ppdu 2209 * Some hw RXDMA can be configured to generate a separate 2210 * 'SW_MONITOR_RING' descriptor at the end of a PPDU (either 2211 * through an 'RX_PPDU_END' TLV or through an 'RX_FLUSH') to 2212 * demarcate PPDUs. 2213 * 2214 * For such a descriptor, this bit is set to 1 and fields 2215 * Reo_level_mpdu_frame_info, mpdu_fragment_number and 2216 * Frameless_bar are all set to 0. 2217 * 2218 * Otherwise this bit is set to 0. 2219 * 2220 * phy_ppdu_id 2221 * A PPDU counter value that PHY increments for every PPDU 2222 * received 2223 * 2224 * The counter value wraps around. Some hw RXDMA can be 2225 * configured to copy this from the RX_PPDU_START TLV for every 2226 * output descriptor. 2227 * 2228 * ring_id 2229 * For debugging. 2230 * This field is filled in by the SRNG module. 2231 * It help to identify the ring that is being looked 2232 * 2233 * looping_count 2234 * For debugging. 2235 * This field is filled in by the SRNG module. 2236 * 2237 * A count value that indicates the number of times the 2238 * producer of entries into this Ring has looped around the 2239 * ring. 2240 * At initialization time, this value is set to 0. On the 2241 * first loop, this value is set to 1. After the max value is 2242 * reached allowed by the number of bits for this field, the 2243 * count value continues with 0 again. 2244 * 2245 * In case SW is the consumer of the ring entries, it can 2246 * use this field to figure out up to where the producer of 2247 * entries has created new entries. This eliminates the need to 2248 * check where the head pointer' of the ring is located once 2249 * the SW starts processing an interrupt indicating that new 2250 * entries have been put into this ring... 2251 */ 2252 2253 enum hal_desc_owner { 2254 HAL_DESC_OWNER_WBM, 2255 HAL_DESC_OWNER_SW, 2256 HAL_DESC_OWNER_TQM, 2257 HAL_DESC_OWNER_RXDMA, 2258 HAL_DESC_OWNER_REO, 2259 HAL_DESC_OWNER_SWITCH, 2260 }; 2261 2262 enum hal_desc_buf_type { 2263 HAL_DESC_BUF_TYPE_TX_MSDU_LINK, 2264 HAL_DESC_BUF_TYPE_TX_MPDU_LINK, 2265 HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_HEAD, 2266 HAL_DESC_BUF_TYPE_TX_MPDU_QUEUE_EXT, 2267 HAL_DESC_BUF_TYPE_TX_FLOW, 2268 HAL_DESC_BUF_TYPE_TX_BUFFER, 2269 HAL_DESC_BUF_TYPE_RX_MSDU_LINK, 2270 HAL_DESC_BUF_TYPE_RX_MPDU_LINK, 2271 HAL_DESC_BUF_TYPE_RX_REO_QUEUE, 2272 HAL_DESC_BUF_TYPE_RX_REO_QUEUE_EXT, 2273 HAL_DESC_BUF_TYPE_RX_BUFFER, 2274 HAL_DESC_BUF_TYPE_IDLE_LINK, 2275 }; 2276 2277 #define HAL_DESC_REO_OWNED 4 2278 #define HAL_DESC_REO_QUEUE_DESC 8 2279 #define HAL_DESC_REO_QUEUE_EXT_DESC 9 2280 #define HAL_DESC_REO_NON_QOS_TID 16 2281 2282 #define HAL_DESC_HDR_INFO0_OWNER GENMASK(3, 0) 2283 #define HAL_DESC_HDR_INFO0_BUF_TYPE GENMASK(7, 4) 2284 #define HAL_DESC_HDR_INFO0_DBG_RESERVED GENMASK(31, 8) 2285 2286 struct hal_desc_header { 2287 __le32 info0; 2288 } __packed; 2289 2290 struct hal_rx_mpdu_link_ptr { 2291 struct ath12k_buffer_addr addr_info; 2292 } __packed; 2293 2294 struct hal_rx_msdu_details { 2295 struct ath12k_buffer_addr buf_addr_info; 2296 struct rx_msdu_desc rx_msdu_info; 2297 struct rx_msdu_ext_desc rx_msdu_ext_info; 2298 } __packed; 2299 2300 #define HAL_RX_MSDU_LNK_INFO0_RX_QUEUE_NUMBER GENMASK(15, 0) 2301 #define HAL_RX_MSDU_LNK_INFO0_FIRST_MSDU_LNK BIT(16) 2302 2303 struct hal_rx_msdu_link { 2304 struct hal_desc_header desc_hdr; 2305 struct ath12k_buffer_addr buf_addr_info; 2306 __le32 info0; 2307 __le32 pn[4]; 2308 struct hal_rx_msdu_details msdu_link[6]; 2309 } __packed; 2310 2311 struct hal_rx_reo_queue_ext { 2312 struct hal_desc_header desc_hdr; 2313 __le32 rsvd; 2314 struct hal_rx_mpdu_link_ptr mpdu_link[15]; 2315 } __packed; 2316 2317 /* hal_rx_reo_queue_ext 2318 * Consumer: REO 2319 * Producer: REO 2320 * 2321 * descriptor_header 2322 * Details about which module owns this struct. 2323 * 2324 * mpdu_link 2325 * Pointer to the next MPDU_link descriptor in the MPDU queue. 2326 */ 2327 2328 enum hal_rx_reo_queue_pn_size { 2329 HAL_RX_REO_QUEUE_PN_SIZE_24, 2330 HAL_RX_REO_QUEUE_PN_SIZE_48, 2331 HAL_RX_REO_QUEUE_PN_SIZE_128, 2332 }; 2333 2334 #define HAL_RX_REO_QUEUE_RX_QUEUE_NUMBER GENMASK(15, 0) 2335 2336 #define HAL_RX_REO_QUEUE_INFO0_VLD BIT(0) 2337 #define HAL_RX_REO_QUEUE_INFO0_ASSOC_LNK_DESC_COUNTER GENMASK(2, 1) 2338 #define HAL_RX_REO_QUEUE_INFO0_DIS_DUP_DETECTION BIT(3) 2339 #define HAL_RX_REO_QUEUE_INFO0_SOFT_REORDER_EN BIT(4) 2340 #define HAL_RX_REO_QUEUE_INFO0_AC GENMASK(6, 5) 2341 #define HAL_RX_REO_QUEUE_INFO0_BAR BIT(7) 2342 #define HAL_RX_REO_QUEUE_INFO0_RETRY BIT(8) 2343 #define HAL_RX_REO_QUEUE_INFO0_CHECK_2K_MODE BIT(9) 2344 #define HAL_RX_REO_QUEUE_INFO0_OOR_MODE BIT(10) 2345 #define HAL_RX_REO_QUEUE_INFO0_BA_WINDOW_SIZE GENMASK(20, 11) 2346 #define HAL_RX_REO_QUEUE_INFO0_PN_CHECK BIT(21) 2347 #define HAL_RX_REO_QUEUE_INFO0_EVEN_PN BIT(22) 2348 #define HAL_RX_REO_QUEUE_INFO0_UNEVEN_PN BIT(23) 2349 #define HAL_RX_REO_QUEUE_INFO0_PN_HANDLE_ENABLE BIT(24) 2350 #define HAL_RX_REO_QUEUE_INFO0_PN_SIZE GENMASK(26, 25) 2351 #define HAL_RX_REO_QUEUE_INFO0_IGNORE_AMPDU_FLG BIT(27) 2352 2353 #define HAL_RX_REO_QUEUE_INFO1_SVLD BIT(0) 2354 #define HAL_RX_REO_QUEUE_INFO1_SSN GENMASK(12, 1) 2355 #define HAL_RX_REO_QUEUE_INFO1_CURRENT_IDX GENMASK(22, 13) 2356 #define HAL_RX_REO_QUEUE_INFO1_SEQ_2K_ERR BIT(23) 2357 #define HAL_RX_REO_QUEUE_INFO1_PN_ERR BIT(24) 2358 #define HAL_RX_REO_QUEUE_INFO1_PN_VALID BIT(31) 2359 2360 #define HAL_RX_REO_QUEUE_INFO2_MPDU_COUNT GENMASK(6, 0) 2361 #define HAL_RX_REO_QUEUE_INFO2_MSDU_COUNT (31, 7) 2362 2363 #define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT GENMASK(9, 4) 2364 #define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT GENMASK(15, 10) 2365 #define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT GENMASK(31, 16) 2366 2367 #define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT GENMASK(23, 0) 2368 #define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT GENMASK(31, 24) 2369 2370 #define HAL_RX_REO_QUEUE_INFO5_LATE_RX_MPDU_COUNT GENMASK(11, 0) 2371 #define HAL_RX_REO_QUEUE_INFO5_WINDOW_JUMP_2K GENMASK(15, 12) 2372 #define HAL_RX_REO_QUEUE_INFO5_HOLE_COUNT GENMASK(31, 16) 2373 2374 struct hal_rx_reo_queue { 2375 struct hal_desc_header desc_hdr; 2376 __le32 rx_queue_num; 2377 __le32 info0; 2378 __le32 info1; 2379 __le32 pn[4]; 2380 __le32 last_rx_enqueue_timestamp; 2381 __le32 last_rx_dequeue_timestamp; 2382 __le32 next_aging_queue[2]; 2383 __le32 prev_aging_queue[2]; 2384 __le32 rx_bitmap[9]; 2385 __le32 info2; 2386 __le32 info3; 2387 __le32 info4; 2388 __le32 processed_mpdus; 2389 __le32 processed_msdus; 2390 __le32 processed_total_bytes; 2391 __le32 info5; 2392 __le32 rsvd[2]; 2393 struct hal_rx_reo_queue_ext ext_desc[]; 2394 } __packed; 2395 2396 /* hal_rx_reo_queue 2397 * 2398 * descriptor_header 2399 * Details about which module owns this struct. Note that sub field 2400 * Buffer_type shall be set to receive_reo_queue_descriptor. 2401 * 2402 * receive_queue_number 2403 * Indicates the MPDU queue ID to which this MPDU link descriptor belongs. 2404 * 2405 * vld 2406 * Valid bit indicating a session is established and the queue descriptor 2407 * is valid. 2408 * associated_link_descriptor_counter 2409 * Indicates which of the 3 link descriptor counters shall be incremented 2410 * or decremented when link descriptors are added or removed from this 2411 * flow queue. 2412 * disable_duplicate_detection 2413 * When set, do not perform any duplicate detection. 2414 * soft_reorder_enable 2415 * When set, REO has been instructed to not perform the actual re-ordering 2416 * of frames for this queue, but just to insert the reorder opcodes. 2417 * ac 2418 * Indicates the access category of the queue descriptor. 2419 * bar 2420 * Indicates if BAR has been received. 2421 * retry 2422 * Retry bit is checked if this bit is set. 2423 * chk_2k_mode 2424 * Indicates what type of operation is expected from Reo when the received 2425 * frame SN falls within the 2K window. 2426 * oor_mode 2427 * Indicates what type of operation is expected when the received frame 2428 * falls within the OOR window. 2429 * ba_window_size 2430 * Indicates the negotiated (window size + 1). Max of 256 bits. 2431 * 2432 * A value 255 means 256 bitmap, 63 means 64 bitmap, 0 (means non-BA 2433 * session, with window size of 0). The 3 values here are the main values 2434 * validated, but other values should work as well. 2435 * 2436 * A BA window size of 0 (=> one frame entry bitmat), means that there is 2437 * no additional rx_reo_queue_ext desc. following rx_reo_queue in memory. 2438 * A BA window size of 1 - 105, means that there is 1 rx_reo_queue_ext. 2439 * A BA window size of 106 - 210, means that there are 2 rx_reo_queue_ext. 2440 * A BA window size of 211 - 256, means that there are 3 rx_reo_queue_ext. 2441 * pn_check_needed, pn_shall_be_even, pn_shall_be_uneven, pn_handling_enable, 2442 * pn_size 2443 * REO shall perform the PN increment check, even number check, uneven 2444 * number check, PN error check and size of the PN field check. 2445 * ignore_ampdu_flag 2446 * REO shall ignore the ampdu_flag on entrance descriptor for this queue. 2447 * 2448 * svld 2449 * Sequence number in next field is valid one. 2450 * ssn 2451 * Starting Sequence number of the session. 2452 * current_index 2453 * Points to last forwarded packet 2454 * seq_2k_error_detected_flag 2455 * REO has detected a 2k error jump in the sequence number and from that 2456 * moment forward, all new frames are forwarded directly to FW, without 2457 * duplicate detect, reordering, etc. 2458 * pn_error_detected_flag 2459 * REO has detected a PN error. 2460 */ 2461 2462 #define HAL_REO_UPD_RX_QUEUE_INFO0_QUEUE_ADDR_HI GENMASK(7, 0) 2463 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RX_QUEUE_NUM BIT(8) 2464 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_VLD BIT(9) 2465 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_ASSOC_LNK_DESC_CNT BIT(10) 2466 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_DIS_DUP_DETECTION BIT(11) 2467 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SOFT_REORDER_EN BIT(12) 2468 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_AC BIT(13) 2469 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BAR BIT(14) 2470 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_RETRY BIT(15) 2471 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_CHECK_2K_MODE BIT(16) 2472 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_OOR_MODE BIT(17) 2473 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_BA_WINDOW_SIZE BIT(18) 2474 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_CHECK BIT(19) 2475 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_EVEN_PN BIT(20) 2476 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_UNEVEN_PN BIT(21) 2477 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_HANDLE_ENABLE BIT(22) 2478 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_SIZE BIT(23) 2479 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_IGNORE_AMPDU_FLG BIT(24) 2480 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SVLD BIT(25) 2481 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SSN BIT(26) 2482 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_SEQ_2K_ERR BIT(27) 2483 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_ERR BIT(28) 2484 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN_VALID BIT(29) 2485 #define HAL_REO_UPD_RX_QUEUE_INFO0_UPD_PN BIT(30) 2486 2487 #define HAL_REO_UPD_RX_QUEUE_INFO1_RX_QUEUE_NUMBER GENMASK(15, 0) 2488 #define HAL_REO_UPD_RX_QUEUE_INFO1_VLD BIT(16) 2489 #define HAL_REO_UPD_RX_QUEUE_INFO1_ASSOC_LNK_DESC_COUNTER GENMASK(18, 17) 2490 #define HAL_REO_UPD_RX_QUEUE_INFO1_DIS_DUP_DETECTION BIT(19) 2491 #define HAL_REO_UPD_RX_QUEUE_INFO1_SOFT_REORDER_EN BIT(20) 2492 #define HAL_REO_UPD_RX_QUEUE_INFO1_AC GENMASK(22, 21) 2493 #define HAL_REO_UPD_RX_QUEUE_INFO1_BAR BIT(23) 2494 #define HAL_REO_UPD_RX_QUEUE_INFO1_RETRY BIT(24) 2495 #define HAL_REO_UPD_RX_QUEUE_INFO1_CHECK_2K_MODE BIT(25) 2496 #define HAL_REO_UPD_RX_QUEUE_INFO1_OOR_MODE BIT(26) 2497 #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_CHECK BIT(27) 2498 #define HAL_REO_UPD_RX_QUEUE_INFO1_EVEN_PN BIT(28) 2499 #define HAL_REO_UPD_RX_QUEUE_INFO1_UNEVEN_PN BIT(29) 2500 #define HAL_REO_UPD_RX_QUEUE_INFO1_PN_HANDLE_ENABLE BIT(30) 2501 #define HAL_REO_UPD_RX_QUEUE_INFO1_IGNORE_AMPDU_FLG BIT(31) 2502 2503 #define HAL_REO_UPD_RX_QUEUE_INFO2_BA_WINDOW_SIZE GENMASK(7, 0) 2504 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_SIZE GENMASK(9, 8) 2505 #define HAL_REO_UPD_RX_QUEUE_INFO2_SVLD BIT(10) 2506 #define HAL_REO_UPD_RX_QUEUE_INFO2_SSN GENMASK(22, 11) 2507 #define HAL_REO_UPD_RX_QUEUE_INFO2_SEQ_2K_ERR BIT(23) 2508 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_ERR BIT(24) 2509 #define HAL_REO_UPD_RX_QUEUE_INFO2_PN_VALID BIT(25) 2510 2511 struct hal_reo_update_rx_queue { 2512 struct hal_reo_cmd_hdr cmd; 2513 __le32 queue_addr_lo; 2514 __le32 info0; 2515 __le32 info1; 2516 __le32 info2; 2517 __le32 pn[4]; 2518 } __packed; 2519 2520 #define HAL_REO_UNBLOCK_CACHE_INFO0_UNBLK_CACHE BIT(0) 2521 #define HAL_REO_UNBLOCK_CACHE_INFO0_RESOURCE_IDX GENMASK(2, 1) 2522 2523 struct hal_reo_unblock_cache { 2524 struct hal_reo_cmd_hdr cmd; 2525 __le32 info0; 2526 __le32 rsvd[7]; 2527 } __packed; 2528 2529 enum hal_reo_exec_status { 2530 HAL_REO_EXEC_STATUS_SUCCESS, 2531 HAL_REO_EXEC_STATUS_BLOCKED, 2532 HAL_REO_EXEC_STATUS_FAILED, 2533 HAL_REO_EXEC_STATUS_RESOURCE_BLOCKED, 2534 }; 2535 2536 #define HAL_REO_STATUS_HDR_INFO0_STATUS_NUM GENMASK(15, 0) 2537 #define HAL_REO_STATUS_HDR_INFO0_EXEC_TIME GENMASK(25, 16) 2538 #define HAL_REO_STATUS_HDR_INFO0_EXEC_STATUS GENMASK(27, 26) 2539 2540 struct hal_reo_status_hdr { 2541 __le32 info0; 2542 __le32 timestamp; 2543 } __packed; 2544 2545 /* hal_reo_status_hdr 2546 * Producer: REO 2547 * Consumer: SW 2548 * 2549 * status_num 2550 * The value in this field is equal to value of the reo command 2551 * number. This field helps to correlate the statuses with the REO 2552 * commands. 2553 * 2554 * execution_time (in us) 2555 * The amount of time REO took to excecute the command. Note that 2556 * this time does not include the duration of the command waiting 2557 * in the command ring, before the execution started. 2558 * 2559 * execution_status 2560 * Execution status of the command. Values are defined in 2561 * enum %HAL_REO_EXEC_STATUS_. 2562 */ 2563 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_SSN GENMASK(11, 0) 2564 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO0_CUR_IDX GENMASK(21, 12) 2565 2566 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MPDU_COUNT GENMASK(6, 0) 2567 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO1_MSDU_COUNT GENMASK(31, 7) 2568 2569 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_WINDOW_JMP2K GENMASK(3, 0) 2570 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_TIMEOUT_COUNT GENMASK(9, 4) 2571 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_FDTB_COUNT GENMASK(15, 10) 2572 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO2_DUPLICATE_COUNT GENMASK(31, 16) 2573 2574 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_FIO_COUNT GENMASK(23, 0) 2575 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO3_BAR_RCVD_CNT GENMASK(31, 24) 2576 2577 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_LATE_RX_MPDU GENMASK(11, 0) 2578 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO4_HOLE_COUNT GENMASK(27, 12) 2579 2580 #define HAL_REO_GET_QUEUE_STATS_STATUS_INFO5_LOOPING_CNT GENMASK(31, 28) 2581 2582 struct hal_reo_get_queue_stats_status { 2583 struct hal_reo_status_hdr hdr; 2584 __le32 info0; 2585 __le32 pn[4]; 2586 __le32 last_rx_enqueue_timestamp; 2587 __le32 last_rx_dequeue_timestamp; 2588 __le32 rx_bitmap[9]; 2589 __le32 info1; 2590 __le32 info2; 2591 __le32 info3; 2592 __le32 num_mpdu_frames; 2593 __le32 num_msdu_frames; 2594 __le32 total_bytes; 2595 __le32 info4; 2596 __le32 info5; 2597 } __packed; 2598 2599 /* hal_reo_get_queue_stats_status 2600 * Producer: REO 2601 * Consumer: SW 2602 * 2603 * status_hdr 2604 * Details that can link this status with the original command. It 2605 * also contains info on how long REO took to execute this command. 2606 * 2607 * ssn 2608 * Starting Sequence number of the session, this changes whenever 2609 * window moves (can be filled by SW then maintained by REO). 2610 * 2611 * current_index 2612 * Points to last forwarded packet. 2613 * 2614 * pn 2615 * Bits of the PN number. 2616 * 2617 * last_rx_enqueue_timestamp 2618 * last_rx_dequeue_timestamp 2619 * Timestamp of arrival of the last MPDU for this queue and 2620 * Timestamp of forwarding an MPDU accordingly. 2621 * 2622 * rx_bitmap 2623 * When a bit is set, the corresponding frame is currently held 2624 * in the re-order queue. The bitmap is Fully managed by HW. 2625 * 2626 * current_mpdu_count 2627 * current_msdu_count 2628 * The number of MPDUs and MSDUs in the queue. 2629 * 2630 * timeout_count 2631 * The number of times REO started forwarding frames even though 2632 * there is a hole in the bitmap. Forwarding reason is timeout. 2633 * 2634 * forward_due_to_bar_count 2635 * The number of times REO started forwarding frames even though 2636 * there is a hole in the bitmap. Fwd reason is reception of BAR. 2637 * 2638 * duplicate_count 2639 * The number of duplicate frames that have been detected. 2640 * 2641 * frames_in_order_count 2642 * The number of frames that have been received in order (without 2643 * a hole that prevented them from being forwarded immediately). 2644 * 2645 * bar_received_count 2646 * The number of times a BAR frame is received. 2647 * 2648 * mpdu_frames_processed_count 2649 * msdu_frames_processed_count 2650 * The total number of MPDU/MSDU frames that have been processed. 2651 * 2652 * total_bytes 2653 * An approximation of the number of bytes received for this queue. 2654 * 2655 * late_receive_mpdu_count 2656 * The number of MPDUs received after the window had already moved 2657 * on. The 'late' sequence window is defined as 2658 * (Window SSN - 256) - (Window SSN - 1). 2659 * 2660 * window_jump_2k 2661 * The number of times the window moved more than 2K 2662 * 2663 * hole_count 2664 * The number of times a hole was created in the receive bitmap. 2665 * 2666 * looping_count 2667 * A count value that indicates the number of times the producer of 2668 * entries into this Ring has looped around the ring. 2669 */ 2670 2671 #define HAL_REO_STATUS_LOOP_CNT GENMASK(31, 28) 2672 2673 #define HAL_REO_FLUSH_QUEUE_INFO0_ERR_DETECTED BIT(0) 2674 #define HAL_REO_FLUSH_QUEUE_INFO0_RSVD GENMASK(31, 1) 2675 #define HAL_REO_FLUSH_QUEUE_INFO1_RSVD GENMASK(27, 0) 2676 2677 struct hal_reo_flush_queue_status { 2678 struct hal_reo_status_hdr hdr; 2679 __le32 info0; 2680 __le32 rsvd0[21]; 2681 __le32 info1; 2682 } __packed; 2683 2684 /* hal_reo_flush_queue_status 2685 * Producer: REO 2686 * Consumer: SW 2687 * 2688 * status_hdr 2689 * Details that can link this status with the original command. It 2690 * also contains info on how long REO took to execute this command. 2691 * 2692 * error_detected 2693 * Status of blocking resource 2694 * 2695 * 0 - No error has been detected while executing this command 2696 * 1 - Error detected. The resource to be used for blocking was 2697 * already in use. 2698 * 2699 * looping_count 2700 * A count value that indicates the number of times the producer of 2701 * entries into this Ring has looped around the ring. 2702 */ 2703 2704 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_IS_ERR BIT(0) 2705 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_BLOCK_ERR_CODE GENMASK(2, 1) 2706 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_STATUS_HIT BIT(8) 2707 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_DESC_TYPE GENMASK(11, 9) 2708 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_CLIENT_ID GENMASK(15, 12) 2709 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_ERR GENMASK(17, 16) 2710 #define HAL_REO_FLUSH_CACHE_STATUS_INFO0_FLUSH_COUNT GENMASK(25, 18) 2711 2712 struct hal_reo_flush_cache_status { 2713 struct hal_reo_status_hdr hdr; 2714 __le32 info0; 2715 __le32 rsvd0[21]; 2716 __le32 info1; 2717 } __packed; 2718 2719 /* hal_reo_flush_cache_status 2720 * Producer: REO 2721 * Consumer: SW 2722 * 2723 * status_hdr 2724 * Details that can link this status with the original command. It 2725 * also contains info on how long REO took to execute this command. 2726 * 2727 * error_detected 2728 * Status for blocking resource handling 2729 * 2730 * 0 - No error has been detected while executing this command 2731 * 1 - An error in the blocking resource management was detected 2732 * 2733 * block_error_details 2734 * only valid when error_detected is set 2735 * 2736 * 0 - No blocking related errors found 2737 * 1 - Blocking resource is already in use 2738 * 2 - Resource requested to be unblocked, was not blocked 2739 * 2740 * cache_controller_flush_status_hit 2741 * The status that the cache controller returned on executing the 2742 * flush command. 2743 * 2744 * 0 - miss; 1 - hit 2745 * 2746 * cache_controller_flush_status_desc_type 2747 * Flush descriptor type 2748 * 2749 * cache_controller_flush_status_client_id 2750 * Module who made the flush request 2751 * 2752 * In REO, this is always 0 2753 * 2754 * cache_controller_flush_status_error 2755 * Error condition 2756 * 2757 * 0 - No error found 2758 * 1 - HW interface is still busy 2759 * 2 - Line currently locked. Used for one line flush command 2760 * 3 - At least one line is still locked. 2761 * Used for cache flush command. 2762 * 2763 * cache_controller_flush_count 2764 * The number of lines that were actually flushed out 2765 * 2766 * looping_count 2767 * A count value that indicates the number of times the producer of 2768 * entries into this Ring has looped around the ring. 2769 */ 2770 2771 #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_IS_ERR BIT(0) 2772 #define HAL_REO_UNBLOCK_CACHE_STATUS_INFO0_TYPE BIT(1) 2773 2774 struct hal_reo_unblock_cache_status { 2775 struct hal_reo_status_hdr hdr; 2776 __le32 info0; 2777 __le32 rsvd0[21]; 2778 __le32 info1; 2779 } __packed; 2780 2781 /* hal_reo_unblock_cache_status 2782 * Producer: REO 2783 * Consumer: SW 2784 * 2785 * status_hdr 2786 * Details that can link this status with the original command. It 2787 * also contains info on how long REO took to execute this command. 2788 * 2789 * error_detected 2790 * 0 - No error has been detected while executing this command 2791 * 1 - The blocking resource was not in use, and therefore it could 2792 * not be unblocked. 2793 * 2794 * unblock_type 2795 * Reference to the type of unblock command 2796 * 0 - Unblock a blocking resource 2797 * 1 - The entire cache usage is unblock 2798 * 2799 * looping_count 2800 * A count value that indicates the number of times the producer of 2801 * entries into this Ring has looped around the ring. 2802 */ 2803 2804 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_IS_ERR BIT(0) 2805 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO0_LIST_EMPTY BIT(1) 2806 2807 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_REL_DESC_COUNT GENMASK(15, 0) 2808 #define HAL_REO_FLUSH_TIMEOUT_STATUS_INFO1_FWD_BUF_COUNT GENMASK(31, 16) 2809 2810 struct hal_reo_flush_timeout_list_status { 2811 struct hal_reo_status_hdr hdr; 2812 __le32 info0; 2813 __le32 info1; 2814 __le32 rsvd0[20]; 2815 __le32 info2; 2816 } __packed; 2817 2818 /* hal_reo_flush_timeout_list_status 2819 * Producer: REO 2820 * Consumer: SW 2821 * 2822 * status_hdr 2823 * Details that can link this status with the original command. It 2824 * also contains info on how long REO took to execute this command. 2825 * 2826 * error_detected 2827 * 0 - No error has been detected while executing this command 2828 * 1 - Command not properly executed and returned with error 2829 * 2830 * timeout_list_empty 2831 * When set, REO has depleted the timeout list and all entries are 2832 * gone. 2833 * 2834 * release_desc_count 2835 * Producer: SW; Consumer: REO 2836 * The number of link descriptor released 2837 * 2838 * forward_buf_count 2839 * Producer: SW; Consumer: REO 2840 * The number of buffers forwarded to the REO destination rings 2841 * 2842 * looping_count 2843 * A count value that indicates the number of times the producer of 2844 * entries into this Ring has looped around the ring. 2845 */ 2846 2847 #define HAL_REO_DESC_THRESH_STATUS_INFO0_THRESH_INDEX GENMASK(1, 0) 2848 #define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0 GENMASK(23, 0) 2849 #define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1 GENMASK(23, 0) 2850 #define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2 GENMASK(23, 0) 2851 #define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM GENMASK(25, 0) 2852 2853 struct hal_reo_desc_thresh_reached_status { 2854 struct hal_reo_status_hdr hdr; 2855 __le32 info0; 2856 __le32 info1; 2857 __le32 info2; 2858 __le32 info3; 2859 __le32 info4; 2860 __le32 rsvd0[17]; 2861 __le32 info5; 2862 } __packed; 2863 2864 /* hal_reo_desc_thresh_reached_status 2865 * Producer: REO 2866 * Consumer: SW 2867 * 2868 * status_hdr 2869 * Details that can link this status with the original command. It 2870 * also contains info on how long REO took to execute this command. 2871 * 2872 * threshold_index 2873 * The index of the threshold register whose value got reached 2874 * 2875 * link_descriptor_counter0 2876 * link_descriptor_counter1 2877 * link_descriptor_counter2 2878 * link_descriptor_counter_sum 2879 * Value of the respective counters at generation of this message 2880 * 2881 * looping_count 2882 * A count value that indicates the number of times the producer of 2883 * entries into this Ring has looped around the ring. 2884 */ 2885 2886 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_DATA_LENGTH GENMASK(13, 0) 2887 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_L4_CSUM_STATUS BIT(14) 2888 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_L3_CSUM_STATUS BIT(15) 2889 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_PID GENMASK(27, 24) 2890 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_QDISC BIT(28) 2891 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_MULTICAST BIT(29) 2892 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_MORE BIT(30) 2893 #define HAL_TCL_ENTRANCE_FROM_PPE_RING_INFO0_VALID_TOGGLE BIT(31) 2894 2895 struct hal_tcl_entrance_from_ppe_ring { 2896 __le32 buffer_addr; 2897 __le32 info0; 2898 } __packed; 2899 2900 struct hal_mon_buf_ring { 2901 __le32 paddr_lo; 2902 __le32 paddr_hi; 2903 __le64 cookie; 2904 }; 2905 2906 /* hal_mon_buf_ring 2907 * Producer : SW 2908 * Consumer : Monitor 2909 * 2910 * paddr_lo 2911 * Lower 32-bit physical address of the buffer pointer from the source ring. 2912 * paddr_hi 2913 * bit range 7-0 : upper 8 bit of the physical address. 2914 * bit range 31-8 : reserved. 2915 * cookie 2916 * Consumer: RxMon/TxMon 64 bit cookie of the buffers. 2917 */ 2918 2919 #define HAL_MON_DEST_COOKIE_BUF_ID GENMASK(17, 0) 2920 2921 #define HAL_MON_DEST_INFO0_END_OFFSET GENMASK(15, 0) 2922 #define HAL_MON_DEST_INFO0_FLUSH_DETECTED BIT(16) 2923 #define HAL_MON_DEST_INFO0_END_OF_PPDU BIT(17) 2924 #define HAL_MON_DEST_INFO0_INITIATOR BIT(18) 2925 #define HAL_MON_DEST_INFO0_EMPTY_DESC BIT(19) 2926 #define HAL_MON_DEST_INFO0_RING_ID GENMASK(27, 20) 2927 #define HAL_MON_DEST_INFO0_LOOPING_COUNT GENMASK(31, 28) 2928 2929 struct hal_mon_dest_desc { 2930 __le32 cookie; 2931 __le32 reserved; 2932 __le32 ppdu_id; 2933 __le32 info0; 2934 }; 2935 2936 /* hal_mon_dest_ring 2937 * Producer : TxMon/RxMon 2938 * Consumer : SW 2939 * cookie 2940 * bit 0 -17 buf_id to track the skb's vaddr. 2941 * ppdu_id 2942 * Phy ppdu_id 2943 * end_offset 2944 * The offset into status buffer where DMA ended, ie., offset to the last 2945 * TLV + last TLV size. 2946 * flush_detected 2947 * Indicates whether 'tx_flush' or 'rx_flush' occurred. 2948 * end_of_ppdu 2949 * Indicates end of ppdu. 2950 * pmac_id 2951 * Indicates PMAC that received from frame. 2952 * empty_descriptor 2953 * This descriptor is written on flush or end of ppdu or end of status 2954 * buffer. 2955 * ring_id 2956 * updated by SRNG. 2957 * looping_count 2958 * updated by SRNG. 2959 */ 2960 2961 #endif /* ATH12K_HAL_DESC_H */ 2962