1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * This file is part of wl1271
4 *
5 * Copyright (C) 2008-2009 Nokia Corporation
6 *
7 * Contact: Luciano Coelho <luciano.coelho@nokia.com>
8 */
9
10 #include <linux/interrupt.h>
11 #include <linux/irq.h>
12 #include <linux/module.h>
13 #include <linux/slab.h>
14 #include <linux/swab.h>
15 #include <linux/crc7.h>
16 #include <linux/spi/spi.h>
17 #include <linux/platform_device.h>
18 #include <linux/of_irq.h>
19 #include <linux/regulator/consumer.h>
20
21 #include "wlcore.h"
22 #include "wl12xx_80211.h"
23 #include "io.h"
24
25 #define WSPI_CMD_READ 0x40000000
26 #define WSPI_CMD_WRITE 0x00000000
27 #define WSPI_CMD_FIXED 0x20000000
28 #define WSPI_CMD_BYTE_LENGTH 0x1FFE0000
29 #define WSPI_CMD_BYTE_LENGTH_OFFSET 17
30 #define WSPI_CMD_BYTE_ADDR 0x0001FFFF
31
32 #define WSPI_INIT_CMD_CRC_LEN 5
33
34 #define WSPI_INIT_CMD_START 0x00
35 #define WSPI_INIT_CMD_TX 0x40
36 /* the extra bypass bit is sampled by the TNET as '1' */
37 #define WSPI_INIT_CMD_BYPASS_BIT 0x80
38 #define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
39 #define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80
40 #define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
41 #define WSPI_INIT_CMD_IOD 0x40
42 #define WSPI_INIT_CMD_IP 0x20
43 #define WSPI_INIT_CMD_CS 0x10
44 #define WSPI_INIT_CMD_WS 0x08
45 #define WSPI_INIT_CMD_WSPI 0x01
46 #define WSPI_INIT_CMD_END 0x01
47
48 #define WSPI_INIT_CMD_LEN 8
49
50 #define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
51 ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
52 #define HW_ACCESS_WSPI_INIT_CMD_MASK 0
53
54 /* HW limitation: maximum possible chunk size is 4095 bytes */
55 #define WSPI_MAX_CHUNK_SIZE 4092
56
57 /*
58 * wl18xx driver aggregation buffer size is (13 * 4K) compared to
59 * (4 * 4K) for wl12xx, so use the larger buffer needed for wl18xx
60 */
61 #define SPI_AGGR_BUFFER_SIZE (13 * SZ_4K)
62
63 /* Maximum number of SPI write chunks */
64 #define WSPI_MAX_NUM_OF_CHUNKS \
65 ((SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + 1)
66
67 static const struct wilink_family_data wl127x_data = {
68 .name = "wl127x",
69 .nvs_name = "ti-connectivity/wl127x-nvs.bin",
70 };
71
72 static const struct wilink_family_data wl128x_data = {
73 .name = "wl128x",
74 .nvs_name = "ti-connectivity/wl128x-nvs.bin",
75 };
76
77 static const struct wilink_family_data wl18xx_data = {
78 .name = "wl18xx",
79 .cfg_name = "ti-connectivity/wl18xx-conf.bin",
80 .nvs_name = "ti-connectivity/wl1271-nvs.bin",
81 };
82
83 struct wl12xx_spi_glue {
84 struct device *dev;
85 struct platform_device *core;
86 struct regulator *reg; /* Power regulator */
87 };
88
wl12xx_spi_reset(struct device * child)89 static void wl12xx_spi_reset(struct device *child)
90 {
91 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
92 u8 *cmd;
93 struct spi_transfer t;
94 struct spi_message m;
95
96 cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
97 if (!cmd) {
98 dev_err(child->parent,
99 "could not allocate cmd for spi reset\n");
100 return;
101 }
102
103 memset(&t, 0, sizeof(t));
104 spi_message_init(&m);
105
106 memset(cmd, 0xff, WSPI_INIT_CMD_LEN);
107
108 t.tx_buf = cmd;
109 t.len = WSPI_INIT_CMD_LEN;
110 spi_message_add_tail(&t, &m);
111
112 spi_sync(to_spi_device(glue->dev), &m);
113
114 kfree(cmd);
115 }
116
wl12xx_spi_init(struct device * child)117 static void wl12xx_spi_init(struct device *child)
118 {
119 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
120 struct spi_transfer t;
121 struct spi_message m;
122 struct spi_device *spi = to_spi_device(glue->dev);
123 u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL);
124
125 if (!cmd) {
126 dev_err(child->parent,
127 "could not allocate cmd for spi init\n");
128 return;
129 }
130
131 memset(&t, 0, sizeof(t));
132 spi_message_init(&m);
133
134 /*
135 * Set WSPI_INIT_COMMAND
136 * the data is being send from the MSB to LSB
137 */
138 cmd[0] = 0xff;
139 cmd[1] = 0xff;
140 cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX;
141 cmd[3] = 0;
142 cmd[4] = 0;
143 cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3;
144 cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN;
145
146 cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS
147 | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS;
148
149 if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0)
150 cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY;
151 else
152 cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY;
153
154 cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END;
155
156 /*
157 * The above is the logical order; it must actually be stored
158 * in the buffer byte-swapped.
159 */
160 __swab32s((u32 *)cmd);
161 __swab32s((u32 *)cmd+1);
162
163 t.tx_buf = cmd;
164 t.len = WSPI_INIT_CMD_LEN;
165 spi_message_add_tail(&t, &m);
166
167 spi_sync(to_spi_device(glue->dev), &m);
168
169 /* Send extra clocks with inverted CS (high). this is required
170 * by the wilink family in order to successfully enter WSPI mode.
171 */
172 spi->mode ^= SPI_CS_HIGH;
173 memset(&m, 0, sizeof(m));
174 spi_message_init(&m);
175
176 cmd[0] = 0xff;
177 cmd[1] = 0xff;
178 cmd[2] = 0xff;
179 cmd[3] = 0xff;
180 __swab32s((u32 *)cmd);
181
182 t.tx_buf = cmd;
183 t.len = 4;
184 spi_message_add_tail(&t, &m);
185
186 spi_sync(to_spi_device(glue->dev), &m);
187
188 /* Restore chip select configuration to normal */
189 spi->mode ^= SPI_CS_HIGH;
190 kfree(cmd);
191 }
192
193 #define WL1271_BUSY_WORD_TIMEOUT 1000
194
wl12xx_spi_read_busy(struct device * child)195 static int wl12xx_spi_read_busy(struct device *child)
196 {
197 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
198 struct wl1271 *wl = dev_get_drvdata(child);
199 struct spi_transfer t[1];
200 struct spi_message m;
201 u32 *busy_buf;
202 int num_busy_bytes = 0;
203
204 /*
205 * Read further busy words from SPI until a non-busy word is
206 * encountered, then read the data itself into the buffer.
207 */
208
209 num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
210 busy_buf = wl->buffer_busyword;
211 while (num_busy_bytes) {
212 num_busy_bytes--;
213 spi_message_init(&m);
214 memset(t, 0, sizeof(t));
215 t[0].rx_buf = busy_buf;
216 t[0].len = sizeof(u32);
217 t[0].cs_change = true;
218 spi_message_add_tail(&t[0], &m);
219 spi_sync(to_spi_device(glue->dev), &m);
220
221 if (*busy_buf & 0x1)
222 return 0;
223 }
224
225 /* The SPI bus is unresponsive, the read failed. */
226 dev_err(child->parent, "SPI read busy-word timeout!\n");
227 return -ETIMEDOUT;
228 }
229
wl12xx_spi_raw_read(struct device * child,int addr,void * buf,size_t len,bool fixed)230 static int __must_check wl12xx_spi_raw_read(struct device *child, int addr,
231 void *buf, size_t len, bool fixed)
232 {
233 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
234 struct wl1271 *wl = dev_get_drvdata(child);
235 struct spi_transfer t[2];
236 struct spi_message m;
237 u32 *busy_buf;
238 u32 *cmd;
239 u32 chunk_len;
240
241 while (len > 0) {
242 chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len);
243
244 cmd = &wl->buffer_cmd;
245 busy_buf = wl->buffer_busyword;
246
247 *cmd = 0;
248 *cmd |= WSPI_CMD_READ;
249 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
250 WSPI_CMD_BYTE_LENGTH;
251 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
252
253 if (fixed)
254 *cmd |= WSPI_CMD_FIXED;
255
256 spi_message_init(&m);
257 memset(t, 0, sizeof(t));
258
259 t[0].tx_buf = cmd;
260 t[0].len = 4;
261 t[0].cs_change = true;
262 spi_message_add_tail(&t[0], &m);
263
264 /* Busy and non busy words read */
265 t[1].rx_buf = busy_buf;
266 t[1].len = WL1271_BUSY_WORD_LEN;
267 t[1].cs_change = true;
268 spi_message_add_tail(&t[1], &m);
269
270 spi_sync(to_spi_device(glue->dev), &m);
271
272 if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
273 wl12xx_spi_read_busy(child)) {
274 memset(buf, 0, chunk_len);
275 return 0;
276 }
277
278 spi_message_init(&m);
279 memset(t, 0, sizeof(t));
280
281 t[0].rx_buf = buf;
282 t[0].len = chunk_len;
283 t[0].cs_change = true;
284 spi_message_add_tail(&t[0], &m);
285
286 spi_sync(to_spi_device(glue->dev), &m);
287
288 if (!fixed)
289 addr += chunk_len;
290 buf += chunk_len;
291 len -= chunk_len;
292 }
293
294 return 0;
295 }
296
__wl12xx_spi_raw_write(struct device * child,int addr,void * buf,size_t len,bool fixed)297 static int __wl12xx_spi_raw_write(struct device *child, int addr,
298 void *buf, size_t len, bool fixed)
299 {
300 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
301 struct spi_transfer *t;
302 struct spi_message m;
303 u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; /* 1 command per chunk */
304 u32 *cmd;
305 u32 chunk_len;
306 int i;
307
308 /* SPI write buffers - 2 for each chunk */
309 t = kzalloc(sizeof(*t) * 2 * WSPI_MAX_NUM_OF_CHUNKS, GFP_KERNEL);
310 if (!t)
311 return -ENOMEM;
312
313 WARN_ON(len > SPI_AGGR_BUFFER_SIZE);
314
315 spi_message_init(&m);
316
317 cmd = &commands[0];
318 i = 0;
319 while (len > 0) {
320 chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len);
321
322 *cmd = 0;
323 *cmd |= WSPI_CMD_WRITE;
324 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) &
325 WSPI_CMD_BYTE_LENGTH;
326 *cmd |= addr & WSPI_CMD_BYTE_ADDR;
327
328 if (fixed)
329 *cmd |= WSPI_CMD_FIXED;
330
331 t[i].tx_buf = cmd;
332 t[i].len = sizeof(*cmd);
333 spi_message_add_tail(&t[i++], &m);
334
335 t[i].tx_buf = buf;
336 t[i].len = chunk_len;
337 spi_message_add_tail(&t[i++], &m);
338
339 if (!fixed)
340 addr += chunk_len;
341 buf += chunk_len;
342 len -= chunk_len;
343 cmd++;
344 }
345
346 spi_sync(to_spi_device(glue->dev), &m);
347
348 kfree(t);
349 return 0;
350 }
351
wl12xx_spi_raw_write(struct device * child,int addr,void * buf,size_t len,bool fixed)352 static int __must_check wl12xx_spi_raw_write(struct device *child, int addr,
353 void *buf, size_t len, bool fixed)
354 {
355 /* The ELP wakeup write may fail the first time due to internal
356 * hardware latency. It is safer to send the wakeup command twice to
357 * avoid unexpected failures.
358 */
359 if (addr == HW_ACCESS_ELP_CTRL_REG)
360 __wl12xx_spi_raw_write(child, addr, buf, len, fixed);
361
362 return __wl12xx_spi_raw_write(child, addr, buf, len, fixed);
363 }
364
365 /**
366 * wl12xx_spi_set_power - power on/off the wl12xx unit
367 * @child: wl12xx device handle.
368 * @enable: true/false to power on/off the unit.
369 *
370 * use the WiFi enable regulator to enable/disable the WiFi unit.
371 */
wl12xx_spi_set_power(struct device * child,bool enable)372 static int wl12xx_spi_set_power(struct device *child, bool enable)
373 {
374 int ret = 0;
375 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
376
377 WARN_ON(!glue->reg);
378
379 /* Update regulator state */
380 if (enable) {
381 ret = regulator_enable(glue->reg);
382 if (ret)
383 dev_err(child, "Power enable failure\n");
384 } else {
385 ret = regulator_disable(glue->reg);
386 if (ret)
387 dev_err(child, "Power disable failure\n");
388 }
389
390 return ret;
391 }
392
393 /*
394 * wl12xx_spi_set_block_size
395 *
396 * This function is not needed for spi mode, but need to be present.
397 * Without it defined the wlcore fallback to use the wrong packet
398 * allignment on tx.
399 */
wl12xx_spi_set_block_size(struct device * child,unsigned int blksz)400 static void wl12xx_spi_set_block_size(struct device *child,
401 unsigned int blksz)
402 {
403 }
404
405 static struct wl1271_if_operations spi_ops = {
406 .read = wl12xx_spi_raw_read,
407 .write = wl12xx_spi_raw_write,
408 .reset = wl12xx_spi_reset,
409 .init = wl12xx_spi_init,
410 .power = wl12xx_spi_set_power,
411 .set_block_size = wl12xx_spi_set_block_size,
412 };
413
414 static const struct of_device_id wlcore_spi_of_match_table[] = {
415 { .compatible = "ti,wl1271", .data = &wl127x_data},
416 { .compatible = "ti,wl1273", .data = &wl127x_data},
417 { .compatible = "ti,wl1281", .data = &wl128x_data},
418 { .compatible = "ti,wl1283", .data = &wl128x_data},
419 { .compatible = "ti,wl1285", .data = &wl128x_data},
420 { .compatible = "ti,wl1801", .data = &wl18xx_data},
421 { .compatible = "ti,wl1805", .data = &wl18xx_data},
422 { .compatible = "ti,wl1807", .data = &wl18xx_data},
423 { .compatible = "ti,wl1831", .data = &wl18xx_data},
424 { .compatible = "ti,wl1835", .data = &wl18xx_data},
425 { .compatible = "ti,wl1837", .data = &wl18xx_data},
426 { }
427 };
428 MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table);
429
430 /**
431 * wlcore_probe_of - DT node parsing.
432 * @spi: SPI slave device parameters.
433 * @glue: wl12xx SPI bus to slave device glue parameters.
434 * @pdev_data: wlcore device parameters
435 */
wlcore_probe_of(struct spi_device * spi,struct wl12xx_spi_glue * glue,struct wlcore_platdev_data * pdev_data)436 static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue,
437 struct wlcore_platdev_data *pdev_data)
438 {
439 struct device_node *dt_node = spi->dev.of_node;
440 const struct of_device_id *of_id;
441
442 of_id = of_match_node(wlcore_spi_of_match_table, dt_node);
443 if (!of_id)
444 return -ENODEV;
445
446 pdev_data->family = of_id->data;
447 dev_info(&spi->dev, "selected chip family is %s\n",
448 pdev_data->family->name);
449
450 if (of_find_property(dt_node, "clock-xtal", NULL))
451 pdev_data->ref_clock_xtal = true;
452
453 /* optional clock frequency params */
454 of_property_read_u32(dt_node, "ref-clock-frequency",
455 &pdev_data->ref_clock_freq);
456 of_property_read_u32(dt_node, "tcxo-clock-frequency",
457 &pdev_data->tcxo_clock_freq);
458
459 return 0;
460 }
461
wl1271_probe(struct spi_device * spi)462 static int wl1271_probe(struct spi_device *spi)
463 {
464 struct wl12xx_spi_glue *glue;
465 struct wlcore_platdev_data *pdev_data;
466 struct resource res[1];
467 int ret;
468
469 pdev_data = devm_kzalloc(&spi->dev, sizeof(*pdev_data), GFP_KERNEL);
470 if (!pdev_data)
471 return -ENOMEM;
472
473 pdev_data->if_ops = &spi_ops;
474
475 glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL);
476 if (!glue) {
477 dev_err(&spi->dev, "can't allocate glue\n");
478 return -ENOMEM;
479 }
480
481 glue->dev = &spi->dev;
482
483 spi_set_drvdata(spi, glue);
484
485 /* This is the only SPI value that we need to set here, the rest
486 * comes from the board-peripherals file */
487 spi->bits_per_word = 32;
488
489 glue->reg = devm_regulator_get(&spi->dev, "vwlan");
490 if (IS_ERR(glue->reg))
491 return dev_err_probe(glue->dev, PTR_ERR(glue->reg),
492 "can't get regulator\n");
493
494 ret = wlcore_probe_of(spi, glue, pdev_data);
495 if (ret) {
496 dev_err(glue->dev,
497 "can't get device tree parameters (%d)\n", ret);
498 return ret;
499 }
500
501 ret = spi_setup(spi);
502 if (ret < 0) {
503 dev_err(glue->dev, "spi_setup failed\n");
504 return ret;
505 }
506
507 glue->core = platform_device_alloc(pdev_data->family->name,
508 PLATFORM_DEVID_AUTO);
509 if (!glue->core) {
510 dev_err(glue->dev, "can't allocate platform_device\n");
511 return -ENOMEM;
512 }
513
514 glue->core->dev.parent = &spi->dev;
515
516 memset(res, 0x00, sizeof(res));
517
518 res[0].start = spi->irq;
519 res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq);
520 res[0].name = "irq";
521
522 ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res));
523 if (ret) {
524 dev_err(glue->dev, "can't add resources\n");
525 goto out_dev_put;
526 }
527
528 ret = platform_device_add_data(glue->core, pdev_data,
529 sizeof(*pdev_data));
530 if (ret) {
531 dev_err(glue->dev, "can't add platform data\n");
532 goto out_dev_put;
533 }
534
535 ret = platform_device_add(glue->core);
536 if (ret) {
537 dev_err(glue->dev, "can't register platform device\n");
538 goto out_dev_put;
539 }
540
541 return 0;
542
543 out_dev_put:
544 platform_device_put(glue->core);
545 return ret;
546 }
547
wl1271_remove(struct spi_device * spi)548 static void wl1271_remove(struct spi_device *spi)
549 {
550 struct wl12xx_spi_glue *glue = spi_get_drvdata(spi);
551
552 platform_device_unregister(glue->core);
553 }
554
555 static struct spi_driver wl1271_spi_driver = {
556 .driver = {
557 .name = "wl1271_spi",
558 .of_match_table = of_match_ptr(wlcore_spi_of_match_table),
559 },
560
561 .probe = wl1271_probe,
562 .remove = wl1271_remove,
563 };
564
565 module_spi_driver(wl1271_spi_driver);
566 MODULE_LICENSE("GPL");
567 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
568 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
569 MODULE_ALIAS("spi:wl1271");
570