1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * SGI IOC3 8250 UART driver
4  *
5  * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
6  *
7  * based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
8  *               Copyright (C) 2014 Joshua Kinard <kumba@gentoo.org>
9  */
10 
11 #include <linux/module.h>
12 #include <linux/errno.h>
13 #include <linux/io.h>
14 #include <linux/platform_device.h>
15 
16 #include "8250.h"
17 
18 #define IOC3_UARTCLK (22000000 / 3)
19 
20 struct ioc3_8250_data {
21 	int line;
22 };
23 
ioc3_serial_in(struct uart_port * p,int offset)24 static unsigned int ioc3_serial_in(struct uart_port *p, int offset)
25 {
26 	return readb(p->membase + (offset ^ 3));
27 }
28 
ioc3_serial_out(struct uart_port * p,int offset,int value)29 static void ioc3_serial_out(struct uart_port *p, int offset, int value)
30 {
31 	writeb(value, p->membase + (offset ^ 3));
32 }
33 
serial8250_ioc3_probe(struct platform_device * pdev)34 static int serial8250_ioc3_probe(struct platform_device *pdev)
35 {
36 	struct ioc3_8250_data *data;
37 	struct uart_8250_port up;
38 	struct resource *r;
39 	void __iomem *membase;
40 	int irq, line;
41 
42 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
43 	if (!r)
44 		return -ENODEV;
45 
46 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
47 	if (!data)
48 		return -ENOMEM;
49 
50 	membase = devm_ioremap(&pdev->dev, r->start, resource_size(r));
51 	if (!membase)
52 		return -ENOMEM;
53 
54 	irq = platform_get_irq(pdev, 0);
55 	if (irq < 0)
56 		irq = 0; /* no interrupt -> use polling */
57 
58 	/* Register serial ports with 8250.c */
59 	memset(&up, 0, sizeof(struct uart_8250_port));
60 	up.port.iotype = UPIO_MEM;
61 	up.port.uartclk = IOC3_UARTCLK;
62 	up.port.type = PORT_16550A;
63 	up.port.irq = irq;
64 	up.port.flags = (UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ);
65 	up.port.dev = &pdev->dev;
66 	up.port.membase = membase;
67 	up.port.mapbase = r->start;
68 	up.port.serial_in = ioc3_serial_in;
69 	up.port.serial_out = ioc3_serial_out;
70 	line = serial8250_register_8250_port(&up);
71 	if (line < 0)
72 		return line;
73 
74 	platform_set_drvdata(pdev, data);
75 	return 0;
76 }
77 
serial8250_ioc3_remove(struct platform_device * pdev)78 static int serial8250_ioc3_remove(struct platform_device *pdev)
79 {
80 	struct ioc3_8250_data *data = platform_get_drvdata(pdev);
81 
82 	serial8250_unregister_port(data->line);
83 	return 0;
84 }
85 
86 static struct platform_driver serial8250_ioc3_driver = {
87 	.probe  = serial8250_ioc3_probe,
88 	.remove = serial8250_ioc3_remove,
89 	.driver = {
90 		.name = "ioc3-serial8250",
91 	}
92 };
93 
94 module_platform_driver(serial8250_ioc3_driver);
95 
96 MODULE_AUTHOR("Thomas Bogendoerfer <tbogendoerfer@suse.de>");
97 MODULE_DESCRIPTION("SGI IOC3 8250 UART driver");
98 MODULE_LICENSE("GPL");
99