1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Gadget support on a system involves
4#    (a) a peripheral controller, and
5#    (b) the gadget driver using it.
6#
7# NOTE:  Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
8#
9#  - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10#  - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11#  - Some systems have both kinds of controllers.
12#
13# With help from a special transceiver and a "Mini-AB" jack, systems with
14# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
15#
16# A Linux "Gadget Driver" talks to the USB Peripheral Controller
17# driver through the abstract "gadget" API.  Some other operating
18# systems call these "client" drivers, of which "class drivers"
19# are a subset (implementing a USB device class specification).
20# A gadget driver implements one or more USB functions using
21# the peripheral hardware.
22#
23# Gadget drivers are hardware-neutral, or "platform independent",
24# except that they sometimes must understand quirks or limitations
25# of the particular controllers they work with.  For example, when
26# a controller doesn't support alternate configurations or provide
27# enough of the right types of endpoints, the gadget driver might
28# not be able work with that controller, or might need to implement
29# a less common variant of a device class protocol.
30#
31# The available choices each represent a single precomposed USB
32# gadget configuration. In the device model, each option contains
33# both the device instantiation as a child for a USB gadget
34# controller, and the relevant drivers for each function declared
35# by the device.
36
37menu "USB Gadget precomposed configurations"
38
39config USB_ZERO
40	tristate "Gadget Zero (DEVELOPMENT)"
41	select USB_LIBCOMPOSITE
42	select USB_F_SS_LB
43	help
44	  Gadget Zero is a two-configuration device.  It either sinks and
45	  sources bulk data; or it loops back a configurable number of
46	  transfers.  It also implements control requests, for "chapter 9"
47	  conformance.  The driver needs only two bulk-capable endpoints, so
48	  it can work on top of most device-side usb controllers.  It's
49	  useful for testing, and is also a working example showing how
50	  USB "gadget drivers" can be written.
51
52	  Make this be the first driver you try using on top of any new
53	  USB peripheral controller driver.  Then you can use host-side
54	  test software, like the "usbtest" driver, to put your hardware
55	  and its driver through a basic set of functional tests.
56
57	  Gadget Zero also works with the host-side "usb-skeleton" driver,
58	  and with many kinds of host-side test software.  You may need
59	  to tweak product and vendor IDs before host software knows about
60	  this device, and arrange to select an appropriate configuration.
61
62	  Say "y" to link the driver statically, or "m" to build a
63	  dynamically linked module called "g_zero".
64
65config USB_ZERO_HNPTEST
66	bool "HNP Test Device"
67	depends on USB_ZERO && USB_OTG
68	help
69	  You can configure this device to enumerate using the device
70	  identifiers of the USB-OTG test device.  That means that when
71	  this gadget connects to another OTG device, with this one using
72	  the "B-Peripheral" role, that device will use HNP to let this
73	  one serve as the USB host instead (in the "B-Host" role).
74
75config USB_AUDIO
76	tristate "Audio Gadget"
77	depends on SND
78	select USB_LIBCOMPOSITE
79	select SND_PCM
80	select USB_F_UAC1 if (GADGET_UAC1 && !GADGET_UAC1_LEGACY)
81	select USB_F_UAC1_LEGACY if (GADGET_UAC1 && GADGET_UAC1_LEGACY)
82	select USB_F_UAC2 if !GADGET_UAC1
83	select USB_U_AUDIO if (USB_F_UAC2 || USB_F_UAC1)
84	help
85	  This Gadget Audio driver is compatible with USB Audio Class
86	  specification 2.0. It implements 1 AudioControl interface,
87	  1 AudioStreaming Interface each for USB-OUT and USB-IN.
88	  Number of channels, sample rate and sample size can be
89	  specified as module parameters.
90	  This driver doesn't expect any real Audio codec to be present
91	  on the device - the audio streams are simply sinked to and
92	  sourced from a virtual ALSA sound card created. The user-space
93	  application may choose to do whatever it wants with the data
94	  received from the USB Host and choose to provide whatever it
95	  wants as audio data to the USB Host.
96
97	  Say "y" to link the driver statically, or "m" to build a
98	  dynamically linked module called "g_audio".
99
100config GADGET_UAC1
101	bool "UAC 1.0"
102	depends on USB_AUDIO
103	help
104	  If you instead want older USB Audio Class specification 1.0 support
105	  with similar driver capabilities.
106
107config GADGET_UAC1_LEGACY
108	bool "UAC 1.0 (Legacy)"
109	depends on GADGET_UAC1
110	help
111	  If you instead want legacy UAC Spec-1.0 driver that also has audio
112	  paths hardwired to the Audio codec chip on-board and doesn't work
113	  without one.
114
115config USB_ETH
116	tristate "Ethernet Gadget (with CDC Ethernet support)"
117	depends on NET
118	select USB_LIBCOMPOSITE
119	select USB_U_ETHER
120	select USB_F_ECM
121	select USB_F_SUBSET
122	select CRC32
123	help
124	  This driver implements Ethernet style communication, in one of
125	  several ways:
126
127	   - The "Communication Device Class" (CDC) Ethernet Control Model.
128	     That protocol is often avoided with pure Ethernet adapters, in
129	     favor of simpler vendor-specific hardware, but is widely
130	     supported by firmware for smart network devices.
131
132	   - On hardware can't implement that protocol, a simple CDC subset
133	     is used, placing fewer demands on USB.
134
135	   - CDC Ethernet Emulation Model (EEM) is a newer standard that has
136	     a simpler interface that can be used by more USB hardware.
137
138	  RNDIS support is an additional option, more demanding than subset.
139
140	  Within the USB device, this gadget driver exposes a network device
141	  "usbX", where X depends on what other networking devices you have.
142	  Treat it like a two-node Ethernet link:  host, and gadget.
143
144	  The Linux-USB host-side "usbnet" driver interoperates with this
145	  driver, so that deep I/O queues can be supported.  On 2.4 kernels,
146	  use "CDCEther" instead, if you're using the CDC option. That CDC
147	  mode should also interoperate with standard CDC Ethernet class
148	  drivers on other host operating systems.
149
150	  Say "y" to link the driver statically, or "m" to build a
151	  dynamically linked module called "g_ether".
152
153config USB_ETH_RNDIS
154	bool "RNDIS support"
155	depends on USB_ETH
156	select USB_LIBCOMPOSITE
157	select USB_F_RNDIS
158	default y
159	help
160	   Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
161	   and Microsoft provides redistributable binary RNDIS drivers for
162	   older versions of Windows.
163
164	   If you say "y" here, the Ethernet gadget driver will try to provide
165	   a second device configuration, supporting RNDIS to talk to such
166	   Microsoft USB hosts.
167
168	   To make MS-Windows work with this, use Documentation/usb/linux.inf
169	   as the "driver info file".  For versions of MS-Windows older than
170	   XP, you'll need to download drivers from Microsoft's website; a URL
171	   is given in comments found in that info file.
172
173config USB_ETH_EEM
174	bool "Ethernet Emulation Model (EEM) support"
175	depends on USB_ETH
176	select USB_LIBCOMPOSITE
177	select USB_F_EEM
178	help
179	  CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
180	  and therefore can be supported by more hardware.  Technically ECM and
181	  EEM are designed for different applications.  The ECM model extends
182	  the network interface to the target (e.g. a USB cable modem), and the
183	  EEM model is for mobile devices to communicate with hosts using
184	  ethernet over USB.  For Linux gadgets, however, the interface with
185	  the host is the same (a usbX device), so the differences are minimal.
186
187	  If you say "y" here, the Ethernet gadget driver will use the EEM
188	  protocol rather than ECM.  If unsure, say "n".
189
190config USB_G_NCM
191	tristate "Network Control Model (NCM) support"
192	depends on NET
193	select USB_LIBCOMPOSITE
194	select USB_U_ETHER
195	select USB_F_NCM
196	select CRC32
197	help
198	  This driver implements USB CDC NCM subclass standard. NCM is
199	  an advanced protocol for Ethernet encapsulation, allows grouping
200	  of several ethernet frames into one USB transfer and different
201	  alignment possibilities.
202
203	  Say "y" to link the driver statically, or "m" to build a
204	  dynamically linked module called "g_ncm".
205
206config USB_GADGETFS
207	tristate "Gadget Filesystem"
208	help
209	  This driver provides a filesystem based API that lets user mode
210	  programs implement a single-configuration USB device, including
211	  endpoint I/O and control requests that don't relate to enumeration.
212	  All endpoints, transfer speeds, and transfer types supported by
213	  the hardware are available, through read() and write() calls.
214
215	  Say "y" to link the driver statically, or "m" to build a
216	  dynamically linked module called "gadgetfs".
217
218config USB_FUNCTIONFS
219	tristate "Function Filesystem"
220	select USB_LIBCOMPOSITE
221	select USB_F_FS
222	select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
223	help
224	  The Function Filesystem (FunctionFS) lets one create USB
225	  composite functions in user space in the same way GadgetFS
226	  lets one create USB gadgets in user space.  This allows creation
227	  of composite gadgets such that some of the functions are
228	  implemented in kernel space (for instance Ethernet, serial or
229	  mass storage) and other are implemented in user space.
230
231	  If you say "y" or "m" here you will be able what kind of
232	  configurations the gadget will provide.
233
234	  Say "y" to link the driver statically, or "m" to build
235	  a dynamically linked module called "g_ffs".
236
237config USB_FUNCTIONFS_ETH
238	bool "Include configuration with CDC ECM (Ethernet)"
239	depends on USB_FUNCTIONFS && NET
240	select USB_U_ETHER
241	select USB_F_ECM
242	select USB_F_SUBSET
243	help
244	  Include a configuration with CDC ECM function (Ethernet) and the
245	  Function Filesystem.
246
247config USB_FUNCTIONFS_RNDIS
248	bool "Include configuration with RNDIS (Ethernet)"
249	depends on USB_FUNCTIONFS && NET
250	select USB_U_ETHER
251	select USB_F_RNDIS
252	help
253	  Include a configuration with RNDIS function (Ethernet) and the Filesystem.
254
255config USB_FUNCTIONFS_GENERIC
256	bool "Include 'pure' configuration"
257	depends on USB_FUNCTIONFS
258	help
259	  Include a configuration with the Function Filesystem alone with
260	  no Ethernet interface.
261
262config USB_MASS_STORAGE
263	tristate "Mass Storage Gadget"
264	depends on BLOCK
265	select USB_LIBCOMPOSITE
266	select USB_F_MASS_STORAGE
267	help
268	  The Mass Storage Gadget acts as a USB Mass Storage disk drive.
269	  As its storage repository it can use a regular file or a block
270	  device (in much the same way as the "loop" device driver),
271	  specified as a module parameter or sysfs option.
272
273	  This driver is a replacement for now removed File-backed
274	  Storage Gadget (g_file_storage).
275
276	  Say "y" to link the driver statically, or "m" to build
277	  a dynamically linked module called "g_mass_storage".
278
279config USB_GADGET_TARGET
280	tristate "USB Gadget Target Fabric Module"
281	depends on TARGET_CORE
282	select USB_LIBCOMPOSITE
283	select USB_F_TCM
284	help
285	  This fabric is an USB gadget. Two USB protocols are supported that is
286	  BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
287	  advertised on alternative interface 0 (primary) and UAS is on
288	  alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
289	  UAS utilizes the USB 3.0 feature called streams support.
290
291config USB_G_SERIAL
292	tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
293	depends on TTY
294	select USB_U_SERIAL
295	select USB_F_ACM
296	select USB_F_SERIAL
297	select USB_F_OBEX
298	select USB_LIBCOMPOSITE
299	help
300	  The Serial Gadget talks to the Linux-USB generic serial driver.
301	  This driver supports a CDC-ACM module option, which can be used
302	  to interoperate with MS-Windows hosts or with the Linux-USB
303	  "cdc-acm" driver.
304
305	  This driver also supports a CDC-OBEX option.  You will need a
306	  user space OBEX server talking to /dev/ttyGS*, since the kernel
307	  itself doesn't implement the OBEX protocol.
308
309	  Say "y" to link the driver statically, or "m" to build a
310	  dynamically linked module called "g_serial".
311
312	  For more information, see Documentation/usb/gadget_serial.rst
313	  which includes instructions and a "driver info file" needed to
314	  make MS-Windows work with CDC ACM.
315
316config USB_MIDI_GADGET
317	tristate "MIDI Gadget"
318	depends on SND
319	select USB_LIBCOMPOSITE
320	select SND_RAWMIDI
321	select USB_F_MIDI
322	help
323	  The MIDI Gadget acts as a USB Audio device, with one MIDI
324	  input and one MIDI output. These MIDI jacks appear as
325	  a sound "card" in the ALSA sound system. Other MIDI
326	  connections can then be made on the gadget system, using
327	  ALSA's aconnect utility etc.
328
329	  Say "y" to link the driver statically, or "m" to build a
330	  dynamically linked module called "g_midi".
331
332config USB_G_PRINTER
333	tristate "Printer Gadget"
334	select USB_LIBCOMPOSITE
335	select USB_F_PRINTER
336	help
337	  The Printer Gadget channels data between the USB host and a
338	  userspace program driving the print engine. The user space
339	  program reads and writes the device file /dev/g_printer to
340	  receive or send printer data. It can use ioctl calls to
341	  the device file to get or set printer status.
342
343	  Say "y" to link the driver statically, or "m" to build a
344	  dynamically linked module called "g_printer".
345
346	  For more information, see Documentation/usb/gadget_printer.rst
347	  which includes sample code for accessing the device file.
348
349if TTY
350
351config USB_CDC_COMPOSITE
352	tristate "CDC Composite Device (Ethernet and ACM)"
353	depends on NET
354	select USB_LIBCOMPOSITE
355	select USB_U_SERIAL
356	select USB_U_ETHER
357	select USB_F_ACM
358	select USB_F_ECM
359	help
360	  This driver provides two functions in one configuration:
361	  a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
362
363	  This driver requires four bulk and two interrupt endpoints,
364	  plus the ability to handle altsettings.  Not all peripheral
365	  controllers are that capable.
366
367	  Say "y" to link the driver statically, or "m" to build a
368	  dynamically linked module.
369
370config USB_G_NOKIA
371	tristate "Nokia composite gadget"
372	depends on PHONET
373	depends on BLOCK
374	select USB_LIBCOMPOSITE
375	select USB_U_SERIAL
376	select USB_U_ETHER
377	select USB_F_ACM
378	select USB_F_OBEX
379	select USB_F_PHONET
380	select USB_F_ECM
381	select USB_F_MASS_STORAGE
382	help
383	  The Nokia composite gadget provides support for acm, obex
384	  and phonet in only one composite gadget driver.
385
386	  It's only really useful for N900 hardware. If you're building
387	  a kernel for N900, say Y or M here. If unsure, say N.
388
389config USB_G_ACM_MS
390	tristate "CDC Composite Device (ACM and mass storage)"
391	depends on BLOCK
392	select USB_LIBCOMPOSITE
393	select USB_U_SERIAL
394	select USB_F_ACM
395	select USB_F_MASS_STORAGE
396	help
397	  This driver provides two functions in one configuration:
398	  a mass storage, and a CDC ACM (serial port) link.
399
400	  Say "y" to link the driver statically, or "m" to build a
401	  dynamically linked module called "g_acm_ms".
402
403config USB_G_MULTI
404	tristate "Multifunction Composite Gadget"
405	depends on BLOCK && NET
406	select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
407	select USB_LIBCOMPOSITE
408	select USB_U_SERIAL
409	select USB_U_ETHER
410	select USB_F_ACM
411	select USB_F_MASS_STORAGE
412	help
413	  The Multifunction Composite Gadget provides Ethernet (RNDIS
414	  and/or CDC Ethernet), mass storage and ACM serial link
415	  interfaces.
416
417	  You will be asked to choose which of the two configurations is
418	  to be available in the gadget.  At least one configuration must
419	  be chosen to make the gadget usable.  Selecting more than one
420	  configuration will prevent Windows from automatically detecting
421	  the gadget as a composite gadget, so an INF file will be needed to
422	  use the gadget.
423
424	  Say "y" to link the driver statically, or "m" to build a
425	  dynamically linked module called "g_multi".
426
427config USB_G_MULTI_RNDIS
428	bool "RNDIS + CDC Serial + Storage configuration"
429	depends on USB_G_MULTI
430	select USB_F_RNDIS
431	default y
432	help
433	  This option enables a configuration with RNDIS, CDC Serial and
434	  Mass Storage functions available in the Multifunction Composite
435	  Gadget.  This is the configuration dedicated for Windows since RNDIS
436	  is Microsoft's protocol.
437
438	  If unsure, say "y".
439
440config USB_G_MULTI_CDC
441	bool "CDC Ethernet + CDC Serial + Storage configuration"
442	depends on USB_G_MULTI
443	select USB_F_ECM
444	help
445	  This option enables a configuration with CDC Ethernet (ECM), CDC
446	  Serial and Mass Storage functions available in the Multifunction
447	  Composite Gadget.
448
449	  If unsure, say "y".
450
451endif # TTY
452
453config USB_G_HID
454	tristate "HID Gadget"
455	select USB_LIBCOMPOSITE
456	select USB_F_HID
457	help
458	  The HID gadget driver provides generic emulation of USB
459	  Human Interface Devices (HID).
460
461	  For more information, see Documentation/usb/gadget_hid.rst which
462	  includes sample code for accessing the device files.
463
464	  Say "y" to link the driver statically, or "m" to build a
465	  dynamically linked module called "g_hid".
466
467# Standalone / single function gadgets
468config USB_G_DBGP
469	tristate "EHCI Debug Device Gadget"
470	depends on TTY
471	select USB_LIBCOMPOSITE
472	help
473	  This gadget emulates an EHCI Debug device. This is useful when you want
474	  to interact with an EHCI Debug Port.
475
476	  Say "y" to link the driver statically, or "m" to build a
477	  dynamically linked module called "g_dbgp".
478
479if USB_G_DBGP
480choice
481	prompt "EHCI Debug Device mode"
482	default USB_G_DBGP_SERIAL
483
484config USB_G_DBGP_PRINTK
485	depends on USB_G_DBGP
486	bool "printk"
487	help
488	  Directly printk() received data. No interaction.
489
490config USB_G_DBGP_SERIAL
491	depends on USB_G_DBGP
492	select USB_U_SERIAL
493	bool "serial"
494	help
495	  Userland can interact using /dev/ttyGSxxx.
496endchoice
497endif
498
499# put drivers that need isochronous transfer support (for audio
500# or video class gadget drivers), or specific hardware, here.
501config USB_G_WEBCAM
502	tristate "USB Webcam Gadget"
503	depends on VIDEO_DEV
504	select USB_LIBCOMPOSITE
505	select VIDEOBUF2_DMA_SG
506	select VIDEOBUF2_VMALLOC
507	select USB_F_UVC
508	help
509	  The Webcam Gadget acts as a composite USB Audio and Video Class
510	  device. It provides a userspace API to process UVC control requests
511	  and stream video data to the host.
512
513	  Say "y" to link the driver statically, or "m" to build a
514	  dynamically linked module called "g_webcam".
515
516config USB_RAW_GADGET
517	tristate "USB Raw Gadget"
518	help
519	  USB Raw Gadget is a gadget driver that gives userspace low-level
520	  control over the gadget's communication process.
521
522	  Like any other gadget driver, Raw Gadget implements USB devices via
523	  the USB gadget API. Unlike most gadget drivers, Raw Gadget does not
524	  implement any concrete USB functions itself but requires userspace
525	  to do that.
526
527	  See Documentation/usb/raw-gadget.rst for details.
528
529	  Say "y" to link the driver statically, or "m" to build a
530	  dynamically linked module called "raw_gadget".
531
532endmenu
533