1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (c) 2001-2002 by David Brownell
4  */
5 
6 #ifndef __LINUX_USB_EHCI_DEF_H
7 #define __LINUX_USB_EHCI_DEF_H
8 
9 #include <linux/usb/ehci-dbgp.h>
10 
11 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
12 
13 /* Section 2.2 Host Controller Capability Registers */
14 struct ehci_caps {
15 	/* these fields are specified as 8 and 16 bit registers,
16 	 * but some hosts can't perform 8 or 16 bit PCI accesses.
17 	 * some hosts treat caplength and hciversion as parts of a 32-bit
18 	 * register, others treat them as two separate registers, this
19 	 * affects the memory map for big endian controllers.
20 	 */
21 	u32		hc_capbase;
22 #define HC_LENGTH(ehci, p)	(0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
23 				(ehci_big_endian_capbase(ehci) ? 24 : 0)))
24 #define HC_VERSION(ehci, p)	(0xffff&((p) >> /* bits 31:16 / offset 02h */ \
25 				(ehci_big_endian_capbase(ehci) ? 0 : 16)))
26 	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
27 #define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
28 #define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
29 #define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
30 #define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
31 #define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
32 #define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
33 #define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
34 #define HCS_N_PORTS_MAX		15		/* N_PORTS valid 0x1-0xF */
35 
36 	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
37 /* EHCI 1.1 addendum */
38 #define HCC_32FRAME_PERIODIC_LIST(p)	((p)&(1 << 19))
39 #define HCC_PER_PORT_CHANGE_EVENT(p)	((p)&(1 << 18))
40 #define HCC_LPM(p)			((p)&(1 << 17))
41 #define HCC_HW_PREFETCH(p)		((p)&(1 << 16))
42 
43 #define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
44 #define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
45 #define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
46 #define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
47 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
48 #define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
49 	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
50 };
51 
52 
53 /* Section 2.3 Host Controller Operational Registers */
54 struct ehci_regs {
55 
56 	/* USBCMD: offset 0x00 */
57 	u32		command;
58 
59 /* EHCI 1.1 addendum */
60 #define CMD_HIRD	(0xf<<24)	/* host initiated resume duration */
61 #define CMD_PPCEE	(1<<15)		/* per port change event enable */
62 #define CMD_FSP		(1<<14)		/* fully synchronized prefetch */
63 #define CMD_ASPE	(1<<13)		/* async schedule prefetch enable */
64 #define CMD_PSPE	(1<<12)		/* periodic schedule prefetch enable */
65 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
66 #define CMD_PARK	(1<<11)		/* enable "park" on async qh */
67 #define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
68 #define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
69 #define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
70 #define CMD_ASE		(1<<5)		/* async schedule enable */
71 #define CMD_PSE		(1<<4)		/* periodic schedule enable */
72 /* 3:2 is periodic frame list size */
73 #define CMD_RESET	(1<<1)		/* reset HC not bus */
74 #define CMD_RUN		(1<<0)		/* start/stop HC */
75 
76 	/* USBSTS: offset 0x04 */
77 	u32		status;
78 #define STS_PPCE_MASK	(0xff<<16)	/* Per-Port change event 1-16 */
79 #define STS_ASS		(1<<15)		/* Async Schedule Status */
80 #define STS_PSS		(1<<14)		/* Periodic Schedule Status */
81 #define STS_RECL	(1<<13)		/* Reclamation */
82 #define STS_HALT	(1<<12)		/* Not running (any reason) */
83 /* some bits reserved */
84 	/* these STS_* flags are also intr_enable bits (USBINTR) */
85 #define STS_IAA		(1<<5)		/* Interrupted on async advance */
86 #define STS_FATAL	(1<<4)		/* such as some PCI access errors */
87 #define STS_FLR		(1<<3)		/* frame list rolled over */
88 #define STS_PCD		(1<<2)		/* port change detect */
89 #define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
90 #define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
91 
92 	/* USBINTR: offset 0x08 */
93 	u32		intr_enable;
94 
95 	/* FRINDEX: offset 0x0C */
96 	u32		frame_index;	/* current microframe number */
97 	/* CTRLDSSEGMENT: offset 0x10 */
98 	u32		segment;	/* address bits 63:32 if needed */
99 	/* PERIODICLISTBASE: offset 0x14 */
100 	u32		frame_list;	/* points to periodic list */
101 	/* ASYNCLISTADDR: offset 0x18 */
102 	u32		async_next;	/* address of next async queue head */
103 
104 	u32		reserved1[2];
105 
106 	/* TXFILLTUNING: offset 0x24 */
107 	u32		txfill_tuning;	/* TX FIFO Tuning register */
108 #define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
109 
110 	u32		reserved2[6];
111 
112 	/* CONFIGFLAG: offset 0x40 */
113 	u32		configured_flag;
114 #define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
115 
116 	union {
117 		/* PORTSC: offset 0x44 */
118 		u32	port_status[HCS_N_PORTS_MAX];	/* up to N_PORTS */
119 /* EHCI 1.1 addendum */
120 #define PORTSC_SUSPEND_STS_ACK 0
121 #define PORTSC_SUSPEND_STS_NYET 1
122 #define PORTSC_SUSPEND_STS_STALL 2
123 #define PORTSC_SUSPEND_STS_ERR 3
124 
125 #define PORT_DEV_ADDR	(0x7f<<25)		/* device address */
126 #define PORT_SSTS	(0x3<<23)		/* suspend status */
127 /* 31:23 reserved */
128 #define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
129 #define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
130 #define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
131 /* 19:16 for port testing */
132 #define PORT_TEST(x)	(((x)&0xf)<<16)	/* Port Test Control */
133 #define PORT_TEST_PKT	PORT_TEST(0x4)	/* Port Test Control - packet test */
134 #define PORT_TEST_FORCE	PORT_TEST(0x5)	/* Port Test Control - force enable */
135 #define PORT_LED_OFF	(0<<14)
136 #define PORT_LED_AMBER	(1<<14)
137 #define PORT_LED_GREEN	(2<<14)
138 #define PORT_LED_MASK	(3<<14)
139 #define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
140 #define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
141 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
142 #define PORT_LS_MASK	(3<<10)		/* Link status (SE0, K or J */
143 /* 9 reserved */
144 #define PORT_LPM	(1<<9)		/* LPM transaction */
145 #define PORT_RESET	(1<<8)		/* reset port */
146 #define PORT_SUSPEND	(1<<7)		/* suspend port */
147 #define PORT_RESUME	(1<<6)		/* resume it */
148 #define PORT_OCC	(1<<5)		/* over current change */
149 #define PORT_OC		(1<<4)		/* over current active */
150 #define PORT_PEC	(1<<3)		/* port enable change */
151 #define PORT_PE		(1<<2)		/* port enable */
152 #define PORT_CSC	(1<<1)		/* connect status change */
153 #define PORT_CONNECT	(1<<0)		/* device connected */
154 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
155 		struct {
156 			u32	reserved3[9];
157 			/* USBMODE: offset 0x68 */
158 			u32	usbmode;	/* USB Device mode */
159 		};
160 #define USBMODE_SDIS	(1<<3)		/* Stream disable */
161 #define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
162 #define USBMODE_CM_HC	(3<<0)		/* host controller mode */
163 #define USBMODE_CM_IDLE	(0<<0)		/* idle state */
164 	};
165 
166 /* Moorestown has some non-standard registers, partially due to the fact that
167  * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
168  * PORTSCx
169  */
170 	union {
171 		struct {
172 			u32	reserved4;
173 			/* HOSTPC: offset 0x84 */
174 			u32	hostpc[HCS_N_PORTS_MAX];
175 #define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
176 #define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
177 		};
178 
179 		/* Broadcom-proprietary USB_EHCI_INSNREG00 @ 0x80 */
180 		u32	brcm_insnreg[4];
181 	};
182 
183 	u32		reserved5[2];
184 
185 	/* USBMODE_EX: offset 0xc8 */
186 	u32		usbmode_ex;	/* USB Device mode extension */
187 #define USBMODE_EX_VBPS	(1<<5)		/* VBus Power Select On */
188 #define USBMODE_EX_HC	(3<<0)		/* host controller mode */
189 };
190 
191 #endif /* __LINUX_USB_EHCI_DEF_H */
192