1 // SPDX-License-Identifier: GPL-2.0
2 // test ir decoder
3 //
4 // Copyright (C) 2018 Sean Young <sean@mess.org>
5
6 // A lirc chardev is a device representing a consumer IR (cir) device which
7 // can receive infrared signals from remote control and/or transmit IR.
8 //
9 // IR is sent as a series of pulses and space somewhat like morse code. The
10 // BPF program can decode this into scancodes so that rc-core can translate
11 // this into input key codes using the rc keymap.
12 //
13 // This test works by sending IR over rc-loopback, so the IR is processed by
14 // BPF and then decoded into scancodes. The lirc chardev must be the one
15 // associated with rc-loopback, see the output of ir-keytable(1).
16 //
17 // The following CONFIG options must be enabled for the test to succeed:
18 // CONFIG_RC_CORE=y
19 // CONFIG_BPF_RAWIR_EVENT=y
20 // CONFIG_RC_LOOPBACK=y
21
22 // Steps:
23 // 1. Open the /dev/lircN device for rc-loopback (given on command line)
24 // 2. Attach bpf_lirc_mode2 program which decodes some IR.
25 // 3. Send some IR to the same IR device; since it is loopback, this will
26 // end up in the bpf program
27 // 4. bpf program should decode IR and report keycode
28 // 5. We can read keycode from same /dev/lirc device
29
30 #include <linux/bpf.h>
31 #include <linux/input.h>
32 #include <errno.h>
33 #include <stdio.h>
34 #include <stdlib.h>
35 #include <string.h>
36 #include <unistd.h>
37 #include <poll.h>
38 #include <sys/types.h>
39 #include <sys/ioctl.h>
40 #include <sys/stat.h>
41 #include <fcntl.h>
42
43 #include "bpf_util.h"
44 #include <bpf/bpf.h>
45 #include <bpf/libbpf.h>
46
47 #include "testing_helpers.h"
48
main(int argc,char ** argv)49 int main(int argc, char **argv)
50 {
51 struct bpf_object *obj;
52 int ret, lircfd, progfd, inputfd;
53 int testir1 = 0x1dead;
54 int testir2 = 0x20101;
55 u32 prog_ids[10], prog_flags[10], prog_cnt;
56
57 if (argc != 3) {
58 printf("Usage: %s /dev/lircN /dev/input/eventM\n", argv[0]);
59 return 2;
60 }
61
62 ret = bpf_prog_test_load("test_lirc_mode2_kern.bpf.o",
63 BPF_PROG_TYPE_LIRC_MODE2, &obj, &progfd);
64 if (ret) {
65 printf("Failed to load bpf program\n");
66 return 1;
67 }
68
69 lircfd = open(argv[1], O_RDWR | O_NONBLOCK);
70 if (lircfd == -1) {
71 printf("failed to open lirc device %s: %m\n", argv[1]);
72 return 1;
73 }
74
75 /* Let's try detach it before it was ever attached */
76 ret = bpf_prog_detach2(progfd, lircfd, BPF_LIRC_MODE2);
77 if (ret != -1 || errno != ENOENT) {
78 printf("bpf_prog_detach2 not attached should fail: %m\n");
79 return 1;
80 }
81
82 inputfd = open(argv[2], O_RDONLY | O_NONBLOCK);
83 if (inputfd == -1) {
84 printf("failed to open input device %s: %m\n", argv[1]);
85 return 1;
86 }
87
88 prog_cnt = 10;
89 ret = bpf_prog_query(lircfd, BPF_LIRC_MODE2, 0, prog_flags, prog_ids,
90 &prog_cnt);
91 if (ret) {
92 printf("Failed to query bpf programs on lirc device: %m\n");
93 return 1;
94 }
95
96 if (prog_cnt != 0) {
97 printf("Expected nothing to be attached\n");
98 return 1;
99 }
100
101 ret = bpf_prog_attach(progfd, lircfd, BPF_LIRC_MODE2, 0);
102 if (ret) {
103 printf("Failed to attach bpf to lirc device: %m\n");
104 return 1;
105 }
106
107 /* Write raw IR */
108 ret = write(lircfd, &testir1, sizeof(testir1));
109 if (ret != sizeof(testir1)) {
110 printf("Failed to send test IR message: %m\n");
111 return 1;
112 }
113
114 struct pollfd pfd = { .fd = inputfd, .events = POLLIN };
115 struct input_event event;
116
117 for (;;) {
118 poll(&pfd, 1, 100);
119
120 /* Read decoded IR */
121 ret = read(inputfd, &event, sizeof(event));
122 if (ret != sizeof(event)) {
123 printf("Failed to read decoded IR: %m\n");
124 return 1;
125 }
126
127 if (event.type == EV_MSC && event.code == MSC_SCAN &&
128 event.value == 0xdead) {
129 break;
130 }
131 }
132
133 /* Write raw IR */
134 ret = write(lircfd, &testir2, sizeof(testir2));
135 if (ret != sizeof(testir2)) {
136 printf("Failed to send test IR message: %m\n");
137 return 1;
138 }
139
140 for (;;) {
141 poll(&pfd, 1, 100);
142
143 /* Read decoded IR */
144 ret = read(inputfd, &event, sizeof(event));
145 if (ret != sizeof(event)) {
146 printf("Failed to read decoded IR: %m\n");
147 return 1;
148 }
149
150 if (event.type == EV_REL && event.code == REL_Y &&
151 event.value == 1 ) {
152 break;
153 }
154 }
155
156 prog_cnt = 10;
157 ret = bpf_prog_query(lircfd, BPF_LIRC_MODE2, 0, prog_flags, prog_ids,
158 &prog_cnt);
159 if (ret) {
160 printf("Failed to query bpf programs on lirc device: %m\n");
161 return 1;
162 }
163
164 if (prog_cnt != 1) {
165 printf("Expected one program to be attached\n");
166 return 1;
167 }
168
169 /* Let's try detaching it now it is actually attached */
170 ret = bpf_prog_detach2(progfd, lircfd, BPF_LIRC_MODE2);
171 if (ret) {
172 printf("bpf_prog_detach2: returned %m\n");
173 return 1;
174 }
175
176 return 0;
177 }
178