1/* 2 * @brief LPC15xx ADC ROM example 3 * 4 * @note 5 * Copyright(C) NXP Semiconductors, 2014 6 * All rights reserved. 7 * 8 * @par 9 * Software that is described herein is for illustrative purposes only 10 * which provides customers with programming information regarding the 11 * LPC products. This software is supplied "AS IS" without any warranties of 12 * any kind, and NXP Semiconductors and its licensor disclaim any and 13 * all warranties, express or implied, including all implied warranties of 14 * merchantability, fitness for a particular purpose and non-infringement of 15 * intellectual property rights. NXP Semiconductors assumes no responsibility 16 * or liability for the use of the software, conveys no license or rights under any 17 * patent, copyright, mask work right, or any other intellectual property rights in 18 * or to any products. NXP Semiconductors reserves the right to make changes 19 * in the software without notification. NXP Semiconductors also makes no 20 * representation or warranty that such application will be suitable for the 21 * specified use without further testing or modification. 22 * 23 * @par 24 * Permission to use, copy, modify, and distribute this software and its 25 * documentation is hereby granted, under NXP Semiconductors' and its 26 * licensor's relevant copyrights in the software, without fee, provided that it 27 * is used in conjunction with NXP Semiconductors microcontrollers. This 28 * copyright, permission, and disclaimer notice must appear in all copies of 29 * this code. 30 */ 31 32/** @defgroup EXAMPLES_PERIPH_15XX_ADC_ROM LPC15xx ADC ROM example 33 * @ingroup EXAMPLES_PERIPH_15XX 34 * <b>Example description</b><br> 35 * The LPC15xx ADC ROM example shows how to use the ADC ROM API to perform 36 * a sequence of conversions and monitor a threshold crossing.<br> 37 * 38 * ADC0 is configured to monitor the internal temperature sensor on 39 * ADC0 channel 0. It is setup to be triggered periodically by the 40 * sysTick interrupt.<br> 41 * 42 * ADC1 is configured to monitor an analog input signal on ADC1. The 43 * ADC channel used may vary per board. It is setup to be triggered 44 * periodically by the sysTick interrupt with optional threshold 45 * support.<br> 46 * 47 * <b>Special connection requirements</b><br> 48 * To use this example, ADC1 channel 1 needs to be connected to an 49 * analog source.<br> 50 * 51 * <b>Build procedures:</b><br> 52 * Visit the <a href="http://www.lpcware.com/content/project/lpcopen-platform-nxp-lpc-microcontrollers/lpcopen-v200-quickstart-guides">LPCOpen quickstart guides</a> 53 * to get started building LPCOpen projects. 54 * 55 * <b>Supported boards and board setup:</b><br> 56 * @ref LPCOPEN_15XX_BOARD_LPCXPRESSO_1549<br> 57 * 58 * <b>Submitting LPCOpen issues:</b><br> 59 * @ref LPCOPEN_COMMUNITY 60 * @{ 61 */ 62 63/** 64 * @} 65 */ 66