1/* 2 * @brief SPI bus master example in interrupt mode 3 * 4 * @note 5 * Copyright(C) NXP Semiconductors, 2014 6 * All rights reserved. 7 * 8 * @par 9 * Software that is described herein is for illustrative purposes only 10 * which provides customers with programming information regarding the 11 * LPC products. This software is supplied "AS IS" without any warranties of 12 * any kind, and NXP Semiconductors and its licensor disclaim any and 13 * all warranties, express or implied, including all implied warranties of 14 * merchantability, fitness for a particular purpose and non-infringement of 15 * intellectual property rights. NXP Semiconductors assumes no responsibility 16 * or liability for the use of the software, conveys no license or rights under any 17 * patent, copyright, mask work right, or any other intellectual property rights in 18 * or to any products. NXP Semiconductors reserves the right to make changes 19 * in the software without notification. NXP Semiconductors also makes no 20 * representation or warranty that such application will be suitable for the 21 * specified use without further testing or modification. 22 * 23 * @par 24 * Permission to use, copy, modify, and distribute this software and its 25 * documentation is hereby granted, under NXP Semiconductors' and its 26 * licensor's relevant copyrights in the software, without fee, provided that it 27 * is used in conjunction with NXP Semiconductors microcontrollers. This 28 * copyright, permission, and disclaimer notice must appear in all copies of 29 * this code. 30 */ 31 32/** @defgroup EXAMPLES_PERIPH_15XX_SPINT LPC15xx SPI bus master (interrupt) example 33 * @ingroup EXAMPLES_PERIPH_15XX 34 * <b>Example description</b><br> 35 * This example shows how to configure SPI as a bus master in interrupt mode.<br> 36 * 37 * This example transmits an array of uint16_t values (0x1111, 0x2222, 0x3333, 0x4444) as SPI master 38 * using interrupt mode. The SPI is configured to be in loop back mode and the received data is compared 39 * against the transmitted data, if they match the transmission is repeated and the LED 0 keeps flickering 40 * In case of any error or mismatch in received and transmitted data, LED 0 will stay On.<br> 41 * 42 * <b>Special connection requirements</b><br> 43 * There are no special connection requirements for this example.<br> 44 * 45 * <b>Build procedures:</b><br> 46 * Visit the <a href="http://www.lpcware.com/content/project/lpcopen-platform-nxp-lpc-microcontrollers/lpcopen-v200-quickstart-guides">LPCOpen quickstart guides</a> 47 * to get started building LPCOpen projects. 48 * 49 * <b>Supported boards and board setup:</b><br> 50 * @ref LPCOPEN_15XX_BOARD_LPCXPRESSO_1549<br> 51 * 52 * <b>Submitting LPCOpen issues:</b><br> 53 * @ref LPCOPEN_COMMUNITY 54 * @{ 55 */ 56 57/** 58 * @} 59 */ 60