1/* 2 * @brief LPC15xx ADC example 3 * 4 * @note 5 * Copyright(C) NXP Semiconductors, 2013 6 * All rights reserved. 7 * 8 * @par 9 * Software that is described herein is for illustrative purposes only 10 * which provides customers with programming information regarding the 11 * LPC products. This software is supplied "AS IS" without any warranties of 12 * any kind, and NXP Semiconductors and its licensor disclaim any and 13 * all warranties, express or implied, including all implied warranties of 14 * merchantability, fitness for a particular purpose and non-infringement of 15 * intellectual property rights. NXP Semiconductors assumes no responsibility 16 * or liability for the use of the software, conveys no license or rights under any 17 * patent, copyright, mask work right, or any other intellectual property rights in 18 * or to any products. NXP Semiconductors reserves the right to make changes 19 * in the software without notification. NXP Semiconductors also makes no 20 * representation or warranty that such application will be suitable for the 21 * specified use without further testing or modification. 22 * 23 * @par 24 * Permission to use, copy, modify, and distribute this software and its 25 * documentation is hereby granted, under NXP Semiconductors' and its 26 * licensor's relevant copyrights in the software, without fee, provided that it 27 * is used in conjunction with NXP Semiconductors microcontrollers. This 28 * copyright, permission, and disclaimer notice must appear in all copies of 29 * this code. 30 */ 31 32/** @defgroup EXAMPLES_PERIPH_15XX_TEMP LPC15xx Temperature sensor example 33 * @ingroup EXAMPLES_PERIPH_15XX 34 * <b>Example description</b><br> 35 * The LPC15xx temperature sensor example shows how to monitor the 36 * chip temperature using the build-in temperature sensor and ADC. 37 * The ADC is configured to monitor the temperature sensor input and 38 * is sampled by manually starting the ADC sequence from the system 39 * tick interrupt. The sequence then starts and generates an interrupt 40 * when complete.<br> 41 * 42 * Note: The recommended approach to read the temperature sensor 43 * requires using an ADC burst and reading a later sample instead of the 44 * initial sample. This examples uses this approach, but displays both 45 * the later sample and initial sample values for comparison.<br> 46 * 47 * <b>Special connection requirements</b><br> 48 * There are no special connection requirements for this example.<br> 49 * 50 * <b>Build procedures:</b><br> 51 * Visit the <a href="http://www.lpcware.com/content/project/lpcopen-platform-nxp-lpc-microcontrollers/lpcopen-v200-quickstart-guides">LPCOpen quickstart guides</a> 52 * to get started building LPCOpen projects. 53 * 54 * <b>Supported boards and board setup:</b><br> 55 * @ref LPCOPEN_15XX_BOARD_LPCXPRESSO_1549<br> 56 * 57 * <b>Submitting LPCOpen issues:</b><br> 58 * @ref LPCOPEN_COMMUNITY 59 * @{ 60 */ 61 62/** 63 * @} 64 */ 65