1/* 2 * @brief UART ROM API polling example (for UARTS0) 3 * 4 * @note 5 * Copyright(C) NXP Semiconductors, 2013 6 * All rights reserved. 7 * 8 * @par 9 * Software that is described herein is for illustrative purposes only 10 * which provides customers with programming information regarding the 11 * LPC products. This software is supplied "AS IS" without any warranties of 12 * any kind, and NXP Semiconductors and its licensor disclaim any and 13 * all warranties, express or implied, including all implied warranties of 14 * merchantability, fitness for a particular purpose and non-infringement of 15 * intellectual property rights. NXP Semiconductors assumes no responsibility 16 * or liability for the use of the software, conveys no license or rights under any 17 * patent, copyright, mask work right, or any other intellectual property rights in 18 * or to any products. NXP Semiconductors reserves the right to make changes 19 * in the software without notification. NXP Semiconductors also makes no 20 * representation or warranty that such application will be suitable for the 21 * specified use without further testing or modification. 22 * 23 * @par 24 * Permission to use, copy, modify, and distribute this software and its 25 * documentation is hereby granted, under NXP Semiconductors' and its 26 * licensor's relevant copyrights in the software, without fee, provided that it 27 * is used in conjunction with NXP Semiconductors microcontrollers. This 28 * copyright, permission, and disclaimer notice must appear in all copies of 29 * this code. 30 */ 31 32/** @defgroup EXAMPLES_PERIPH_15XX_UART0_ROM_API_POLLING LPC15xx UART polling example using ROM API 33 * @ingroup EXAMPLES_PERIPH_15XX 34 * <b>Example description</b><br> 35 * The UART example shows how to use the UART ROM API in polled mode. 36 * This example only applies to USART0.<br> 37 * 38 * To use the example, connect a serial cable to the board's RS232/UART port and 39 * start a terminal program to monitor the port. The terminal program on the host 40 * PC should be setup for 115200-8-N-1. 41 * Once the example is started, a small message is printed on terminal. Any data 42 * received will be returned back to the caller.<br> 43 * 44 * <b>Special connection requirements</b><br> 45 * The LPCXpresso base board is required with the LPCXpresso board to use this 46 * example. The Manley board needs no extra hardware.<br> 47 * 48 * <b>Build procedures:</b><br> 49 * Visit the <a href="http://www.lpcware.com/content/project/lpcopen-platform-nxp-lpc-microcontrollers/lpcopen-v200-quickstart-guides">LPCOpen quickstart guides</a> 50 * to get started building LPCOpen projects. 51 * 52 * <b>Supported boards and board setup:</b><br> 53 * @ref LPCOPEN_15XX_BOARD_LPCXPRESSO_1549<br> 54 * 55 * <b>Submitting LPCOpen issues:</b><br> 56 * @ref LPCOPEN_COMMUNITY 57 * @{ 58 */ 59 60/** 61 * @} 62 */ 63