Lines Matching refs:trig
100 or may appear in a trig-conns child node when appropriate.
114 will be enabled. Use in a trig-conns node, or in CTI base node when
121 # size cells and address cells required if trig-conns node present.
129 '^trig-conns@([0-9]+)$':
142 arm,trig-in-sigs:
147 List of CTI trigger in signal numbers in use by a trig-conns node.
149 arm,trig-in-types:
156 arm,trig-in-sigs array. If the -types array is smaller, or omitted
159 arm,trig-out-sigs:
164 List of CTI trigger out signal numbers in use by a trig-conns node.
166 arm,trig-out-types:
173 in the arm,trig-out-sigs array. If the "-types" array is smaller,
176 arm,trig-filters:
184 arm,trig-conn-name:
194 - arm,trig-in-sigs
196 - arm,trig-out-sigs
199 - arm,trig-conn-name
251 # #size-cells and #address-cells are required if trig-conns@ nodes present.
267 trig-conns@0 {
269 arm,trig-in-sigs = <4 5 6 7>;
270 arm,trig-in-types = <ETM_EXTOUT
274 arm,trig-out-sigs = <4 5 6 7>;
275 arm,trig-out-types = <ETM_EXTIN
282 trig-conns@1 {
285 arm,trig-in-sigs = <0 1>;
286 arm,trig-in-types = <PE_DBGTRIGGER
288 arm,trig-out-sigs=<0 1 2 >;
289 arm,trig-out-types = <PE_EDBGREQ
293 arm,trig-filters = <0>;
308 trig-conns@0 {
310 arm,trig-in-sigs=<0>;
311 arm,trig-in-types=<GEN_INTREQ>;
312 arm,trig-out-sigs=<0>;
313 arm,trig-out-types=<GEN_HALTREQ>;
314 arm,trig-conn-name = "sys_profiler";
317 trig-conns@1 {
319 arm,trig-out-sigs=<2 3>;
320 arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
321 arm,trig-conn-name = "watchdog";
324 trig-conns@2 {
326 arm,trig-in-sigs=<1 6>;
327 arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
328 arm,trig-conn-name = "g_counter";