Lines Matching refs:code

12 - InitThread message and return code
39 offset 0xa00   for inbound message code message_rwbuffer
41 offset 0xa00   for outbound message code message_rwbuffer
96 			    1   Error, error code in AdapStatus/DevStatus/SenseData
126 9. Message0 message code
132 	->offset 0xa00 :for outbound message code message_rwbuffer
151 	->offset 0xa00 :for inbound message code message_rwbuffer
166 	->offset 0xa00   for inbound message code message_rwbuffer
195 		command code, data and checksum byte
213 		command code
218 	    depends on command code
223 3. Command code and associated data
226 The following are command code defined in raid controller Command
227 code 0x10--0x1? are used for system level management,
230 Command code 0x20--0x?? always check the password,
288 	byte 2            command code 0x10
299 	byte 2            command code 0x11
310 	byte 2            command code 0x12
321 	byte 2            command code 0x13
330 	byte 2            command code 0x14
340 	byte 2            command code 0x15
351 	byte 2            command code 0x17
362 	byte 2            command code 0x18
376 	byte 2            command code 0x19
384 	byte 2            command code 0x1a
393 	byte 2 		  command code 0x1b
418 	byte 2         	  command code 0x20
436 	byte 2            command code 0x20
469 	byte 2            command code 0x21
501 	byte 2            command code 0x22
529 	byte 2            command code 0x23
584 	byte 2            command code 0x24
592 	byte 2            command code 0x30
599 	byte 2            command code 0x31
608 	byte 2 		  command code 0x32
618 	byte 2 		  command code 0x33
627 	byte 2 		  command code 0x34
636 	byte 2 		  command code 0x35
645 	byte 2            command code 0x36
654 	byte 2 		  command code 0x37
672 	byte 2            command code 0x38
680 	byte 2            command code 0x39
690 	byte 2 		  command code 0x40
707 	byte 2 		  command code 0x41
724 	byte 2            command code 0x42
732 	byte 2            command code 0x43
744 	byte 2            command code 0x50
754 	byte 2            command code 0x51
763 	byte 2            command code 0x52
778 	byte 2            command code 0x53
787 	byte 2            command code 0x54
796 	byte 2            command code 0x55
805 	byte 2            command code 0x60
829 	byte 2            command code 0x61
852 	byte 2            command code 0x62
861 	byte 2            command code 0x63
870 	byte 2            command code 0x64
884 	1) If length == 1 ==> 1 byte status code::
903 		and the contents depends on the command code