xref: /linux/drivers/input/touchscreen/Kconfig

8 	  Say Y here, and a list of supported touchscreens will be displayed.
19 	  Say Y here if you have a 88PM860x PMIC and want to enable
24 	  To compile this driver as a module, choose M here: the
32 	  Say Y here if you have a touchscreen interface using the
43 	  To compile this driver as a module, choose M here: the
50 	  Say Y here if you have a touchscreen interface using the
56 	  To compile this driver as a module, choose M here: the
62 	  Say Y here if you want to support a touchscreen interface using
67 	  To compile this driver as a module, choose M here: the
75 	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
77 	  To compile this driver as a module, choose M here: the
85 	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
89 	  To compile this driver as a module, choose M here: the
98 	  Say Y here if you want to use the generic ADC
103 	  To compile this driver as a module, choose M here: the
110 	  Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
115 	  To compile this driver as a module, choose M here: the
123 	  Say Y here if you have Atmel mXT series I2C touchscreen,
128 	  To compile this driver as a module, choose M here: the
137 	  Say Y here if you want support to output data from the T37
145 	  Say Y here if you have a AUO display with in-cell touchscreen
150 	  To compile this driver as a module, choose M here: the
157 	  Say Y here if you have a bu21013 touchscreen connected to
162 	  To compile this driver as a module, choose M here: the
169 	  Say Y here if you have a Rohm BU21029 touchscreen controller
174 	  To compile this driver as a module, choose M here: the
183 	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
187 	  To compile this driver as a module, choose M here: the
194 	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
198 	  To compile this driver as a module, choose M here: the
205 	  Say Y here if you have a Cypress CY8CTMA140 capacitive
210 	  To compile this driver as a module, choose M here: the
218 	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
223 	  To compile this driver as a module, choose M here: the
229 	  Say Y here if you have a touchscreen using controller from
236 	  To compile this driver as a module, choose M here: the
243 	  Say Y here if the touchscreen is connected via I2C bus.
245 	  To compile this driver as a module, choose M here: the
252 	  Say Y here if the touchscreen is connected via SPI bus.
254 	  To compile this driver as a module, choose M here: the
263 	  Say Y here if you have a Cypress Gen4 touchscreen.
267 	  To compile this driver as a module, choose M here.
273 	  Say Y here if the touchscreen is connected via I2C bus.
275 	  To compile this driver as a module, choose M here: the
282 	  Say Y here if the touchscreen is connected via SPI bus.
284 	  To compile this driver as a module, choose M here: the
292 	  Say Y here to enable the support for the touchscreen found
297 	  To compile this driver as a module, choose M here: the
304 	  Say Y here to support the touchscreen found on Dialog Semiconductor
309 	  To compile this driver as a module, choose M here: the
316 	  Say Y here if you have a Dynapro serial touchscreen connected to
321 	  To compile this driver as a module, choose M here: the
328 	  Say Y here if you have a Hampshire serial touchscreen connected to
333 	  To compile this driver as a module, choose M here: the
340 	  Say Y here to enable support for I2C connected EETI touch panels.
342 	  To compile this driver as a module, choose M here: the
349 	  Say Y here to enable support for I2C connected EETI
352 	  To compile this driver as a module, choose M here: the
359 	  Say Y here to enable support for serial connected EETI
362 	  To compile this driver as a module, choose M here: the
369 	  Say Y here to enable support for I2C connected EETI
372 	  To compile this driver as a module, choose M here: the
379 	  Say Y here if you have the Fujitsu touchscreen (such as one
385 	  To compile this driver as a module, choose M here: the
393 	  Say Y here if you have the Goodix touchscreen (such as one
400 	  To compile this driver as a module, choose M here: the
407 	  Say Y here if you have a touchscreen using HiDeep.
411 	  To compile this driver as a module, choose M here : the
418 	  Say Y here if you have a touchscreen using Hycon hy46xx
422 	  To compile this driver as a module, choose M here: the
430 	  Say Y here if you have a ILI210X based touchscreen
438 	  To compile this driver as a module, choose M here: the
445 	  Say Y here if you have touchscreen with ILITEK touch IC,
450 	  To compile this driver as a module, choose M here: the
457 	  Say Y here if you want to add support for the IPROC touch
462 	  To compile this driver as a module, choose M here: the
470 	  Say Y here if you have the s3c2410 touchscreen.
474 	  To compile this driver as a module, choose M here: the
485 	  To compile this driver as module, choose M here: the
492 	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
497 	  To compile this driver as a module, choose M here: the
504 	  Say Y here if you have an Elan eKTF2127 touchscreen
509 	  To compile this driver as a module, choose M here: the
516 	  Say Y here if you have an Elan eKTH I2C touchscreen
521 	  To compile this driver as a module, choose M here: the
528 	  Say Y here if you have an Elo serial touchscreen connected to
533 	  To compile this driver as a module, choose M here: the
540 	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
545 	  To compile this driver as a module, choose M here: the
552 	  Say Y here if you want to use the I2C version of the Wacom
557 	  To compile this driver as a module, choose M here: the module
564 	  Say Y here if you have a LPC32XX device and want
567 	  To compile this driver as a module, choose M here: the
574 	  Say Y here if you have a MAX11801 based touchscreen
579 	  To compile this driver as a module, choose M here: the
586 	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
591 	  To compile this driver as a module, choose M here: the
598 	  Say Y here if you have the MELFAS MMS114 touchscreen controller
603 	  To compile this driver as a module, choose M here: the
610 	  Say Y here if you have a MELFAS MIP4 Touchscreen device.
614 	  To compile this driver as a module, choose M here:
622 	  Say Y here if you have an I2C touchscreen using MStar msg2638.
626 	  To compile this driver as a module, choose M here: the
633 	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
638 	  To compile this driver as a module, choose M here: the
645 	  Say Y here if you have a Freescale i.MX6UL, and want to
650 	  To compile this driver as a module, choose M here: the
657 	  Say Y here if you have an iNexio serial touchscreen connected to
662 	  To compile this driver as a module, choose M here: the
668 	  Say Y here if you have the ICS MicroClock MK712 touchscreen
673 	  To compile this driver as a module, choose M here: the
680 	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
683 	  To compile this driver as a module, choose M here: the
690 	  Say Y here if you have a HP Jornada 710/720/728 and want
693 	  To compile this driver as a module, choose M here: the
700 	  Say Y here to enable support for the touchscreen attached to
705 	  To compile this driver as a module, choose M here: the
712 	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
717 	  To compile this driver as a module, choose M here: the
724 	  Say Y here if you have a Penmount serial touchscreen connected to
729 	  To compile this driver as a module, choose M here: the
736 	  Say Y here if you have an EDT "Polytouch" touchscreen based
742 	  To compile this driver as a module, choose M here: the
749 	  Say Y here if you have the official Raspberry Pi 7 inch screen on
754 	  To compile this driver as a module, choose M here: the
761 	  Say Y here to enable MIGO-R touchscreen support.
765 	  To compile this driver as a module, choose M here: the
772 	  Say Y here if you have a Touchright serial touchscreen connected to
777 	  To compile this driver as a module, choose M here: the
784 	  Say Y here if you have a Touchwin serial touchscreen connected to
789 	  To compile this driver as a module, choose M here: the
796 	  Say Y here if you have 4/5/8 wire touchscreen controller
801 	  To compile this driver as a module, choose M here: the
817 	  To compile this driver as a module, choose M here: the
824 	  Say Y here if you have a pixcir i2c touchscreen
829 	  To compile this driver as a module, choose M here: the
836 	  Say Y here if you have a Weida WDT87XX I2C touchscreen
841 	  To compile this driver as a module, choose M here: the
851 	  To compile this driver as a module, choose M here: the
858 	  Say Y here if you have a Wolfson Microelectronics WM97xx
865 	  To compile this driver as a module, choose M here: the
873 	  Say Y here to enable support for the Wolfson Microelectronics
881 	  Say Y here to enable support for the Wolfson Microelectronics
889 	  Say Y here to enable support for the Wolfson Microelectronics
896 	  Say Y here for support for streaming mode with WM97xx touchscreens
901 	  To compile this driver as a module, choose M here: the
909 	  Say Y here for support for streaming mode with the touchscreen
914 	  To compile this driver as a module, choose M here: the
942 	  To compile this driver as a module, choose M here: the
949 	  Say Y here if you have a touchscreen connected to the low-resolution
952 	  To compile this driver as a module, choose M here: the module will be
961 	  To compile this driver as a module, choose M here: the
968 	  Say Y here if you have an Freescale MC13783 PMIC on your
973 	  To compile this driver as a module, choose M here: the
1066 	  Say Y here if you have an EasyTouch USB Touch controller.
1073 	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1077 	  To compile this driver as a module, choose M here: the
1086 	  Say Y here if you have a touchscreen on a TS-4800 board.
1093 	  To compile this driver as a module, choose M here: the
1100 	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1105 	  To compile this driver as a module, choose M here: the
1117 	  Say Y here if you have a TSC2004 based touchscreen.
1121 	  To compile this driver as a module, choose M here: the
1130 	  Say Y here if you have a TSC2005 based touchscreen.
1134 	  To compile this driver as a module, choose M here: the
1141 	  Say Y here if you have a TSC2007 based touchscreen.
1145 	  To compile this driver as a module, choose M here: the
1153 	  Saying Y here adds an iio interface to the tsc2007 which
1162 	  Say Y here if you have a Motorola EZX telephone and
1165 	  To compile this driver as a module, choose M here: the
1173 	  Say Y here if you have Raydium series I2C touchscreen,
1178 	  To compile this driver as a module, choose M here: the
1185 	  Say Y here if you have the Silead touchscreen connected to
1190 	  To compile this driver as a module, choose M here: the
1203 	  To compile this driver as a module, choose M here: the
1210 	  Say Y here if you want to support the Sitronix ST1232
1215 	  To compile this driver as a module, choose M here: the
1223 	  Say Y here if you want support for STMicroelectronics
1226 	  To compile this driver as a module, choose M here: the
1234 	  Say Y here if you want support for STMicroelectronics
1237 	  To compile this driver as a module, choose M here: the
1249 	  To compile this driver as a module, choose M here: the
1258 	  Say Y here if you want support for the Samsung SUR40 touchscreen
1261 	  To compile this driver as a module, choose M here: the
1269 	  Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1274 	  To compile this driver as a module, choose M here: the
1281 	  Say Y here if you have a Semtech SX8654 touchscreen controller.
1285 	  To compile this driver as a module, choose M here: the
1292 	  Say Y here if you have a TPS6507x based touchscreen
1297 	  To compile this driver as a module, choose M here: the
1304 	  Say Y here if you have a touchscreen using Zeitec ZET6223
1308 	  To compile this driver as a module, choose M here: the
1316 	  Say Y here if you have a touchscreen using the zforce
1321 	  To compile this driver as a module, choose M here: the
1329 	  Say Y here if you have a Colibri VF50 and plan to use
1334 	  To compile this driver as a module, choose M here: the
1341 	  Say Y here if you have a touchscreen using ROHM BU21023/24.
1345 	  To compile this driver as a module, choose M here: the
1355 	  To compile this driver as a module, choose M here: the
1362 	  Say Y here if you have a touchscreen using Zinitix bt541,
1367 	  To compile this driver as a module, choose M here: the

Last Index update Fri Sep 05 17:56:23 CST 2025