| /linux/Documentation/devicetree/bindings/sound/ |
| A D | tlv320adcx140.yaml | 153 1 - GPIO1 is configured as a general-purpose output (GPO)
154 2 - (default) GPIO1 is configured as a device interrupt output (IRQ)
155 3 - GPIO1 is configured as a secondary ASI output (SDOUT2)
156 4 - GPIO1 is configured as a PDM clock output (PDMCLK)
157 8 - GPIO1 is configured as an input to control when MICBIAS turns on or
159 9 - GPIO1 is configured as a general-purpose input (GPI)
160 10 - GPIO1 is configured as a master clock input (MCLK)
161 11 - GPIO1 is configured as an ASI input for daisy-chain (SDIN)
162 12 - GPIO1 is configured as a PDM data input for channel 1 and channel 2
164 13 - GPIO1 is configured as a PDM data input for channel 3 and channel 4
[all …]
|
| A D | cirrus,cs35l41.yaml | 80 Boolean which specifies whether the GPIO1
86 Boolean which specifies whether the GPIO1 pin
93 Configures the function of the GPIO1 pin.
119 Note that the options are different from the GPIO1 pin.
|
| A D | rt5668.txt | 21 0: using GPIO1 pin as dmic1 clock pin
|
| A D | rt5677.txt | 39 Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
|
| A D | rt5682.txt | 21 0: using GPIO1 pin as dmic1 clock pin
|
| /linux/drivers/video/fbdev/omap/ |
| A D | lcd_h3.c | 23 r = tps65010_set_gpio_out_value(GPIO1, HIGH); in h3_panel_enable()
37 r = tps65010_set_gpio_out_value(GPIO1, LOW); in h3_panel_disable()
|
| /linux/Documentation/devicetree/bindings/mfd/ |
| A D | max77620.txt | 34 and power-down delays (sequencing). GPIO1, GPIO2, and GPIO3 can be programmed
46 Each regulator, GPIO1, GPIO2, GPIO3, and 32KHz clock has a flexible power
117 1: Enables POK(Power OK) to control nRST_IO and GPIO1
121 If POK mapping is enabled for GPIO1/nRST_IO then,
122 GPIO1/nRST_IO pins are HIGH only if all rails
125 control) then, GPIO1/nRST_IO goes LOW.
|
| /linux/drivers/pinctrl/ |
| A D | pinctrl-xway.c | 117 MFP_XWAY(GPIO1, GPIO, EXIN, NONE, NONE),
206 static const unsigned pins_exin1[] = {GPIO1};
353 MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU),
399 static const unsigned ase_pins_dfe_led0[] = {GPIO1};
481 MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, MII),
517 static const unsigned danube_pins_exin1[] = {GPIO1};
656 MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN),
716 static const unsigned xrx100_pins_exin1[] = {GPIO1};
869 MFP_XWAY(GPIO1, GPIO, EXIN, CBUS, SIN),
923 static const unsigned xrx200_pins_exin1[] = {GPIO1};
[all …]
|
| A D | pinctrl-lantiq.h | 107 GPIO1, enumerator
|
| /linux/arch/sh/kernel/cpu/sh4a/ |
| A D | setup-shx3.c | 185 GPIO0, GPIO1, GPIO2, GPIO3, enumerator
232 INTC_VECT(GPIO0, 0xe40), INTC_VECT(GPIO1, 0xe60),
267 DU, GPIO3, GPIO2, GPIO1, GPIO0, PAM, 0, 0,
303 GPIO2, GPIO1, GPIO0, IRM } },
|
| A D | setup-sh7786.c | 496 GPIO0, GPIO1, enumerator
541 INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
611 HSPI, GPIO0, GPIO1, Thermal,
651 GPIO1, Thermal } },
|
| /linux/drivers/media/usb/dvb-usb/ |
| A D | dib07x0.h | 7 GPIO1 = 2, enumerator
|
| /linux/arch/powerpc/boot/dts/ |
| A D | warp.dts | 253 GPIO1: gpio@ef600c00 { label
263 gpios = <&GPIO1 0 0>;
267 gpios = <&GPIO1 1 0>;
|
| /linux/drivers/net/wireless/realtek/rtl818x/rtl8187/ |
| A D | rfkill.c | 26 gpio = rtl818x_ioread8(priv, &priv->map->GPIO1); in rtl8187_is_radio_enabled()
|
| /linux/Documentation/devicetree/bindings/pinctrl/ |
| A D | ste,nomadik.txt | 119 pins = "GPIO1", "GPIO3";
129 pins = "GPIO1";
|
| /linux/Documentation/devicetree/bindings/gpio/ |
| A D | x-powers,axp209-gpio.yaml | 38 - GPIO1
|
| A D | xylon,logicvc-gpio.yaml | 68 gpio-line-names = "GPIO0", "GPIO1", "GPIO2", "GPIO3", "GPIO4",
|
| /linux/include/linux/mfd/ |
| A D | tps65010.h | 117 #define GPIO1 1 macro
|
| /linux/Documentation/devicetree/bindings/interrupt-controller/ |
| A D | rda,8810pl-intc.txt | 30 12: GPIO1
|
| /linux/arch/arm64/boot/dts/rockchip/ |
| A D | rk3399-gru-chromebook.dtsi | 274 gpio-line-names = /* GPIO1 A 0-7 */
284 /* GPIO1 B 0-7 */
294 /* GPIO1 C 0-7 */
|
| A D | rk3399-gru-scarlet.dtsi | 419 gpio-line-names = /* GPIO1 A 0-7 */
429 /* GPIO1 B 0-7 */
439 /* GPIO1 C 0-7 */
449 /* GPIO1 D0 */
|
| /linux/arch/arm/boot/dts/ |
| A D | bcm2835-rpi-cm1-io1.dts | 21 "GPIO1",
|
| A D | bcm2837-rpi-cm3-io3.dts | 21 "GPIO1",
|
| /linux/Documentation/arm/ |
| A D | netwinder.rst | 32 0x0338 GPIO1
|
| /linux/arch/arm64/boot/dts/allwinner/ |
| A D | axp803.dtsi | 35 pins = "GPIO1";
|