Lines Matching refs:netconsole
30 netconsole initializes immediately after NIC cards and will bring up
38 It takes a string configuration parameter "netconsole" in the
41 netconsole=[+][r][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr]
55 linux netconsole=4444@10.0.0.1/eth1,9353@10.0.0.2/12:34:56:78:9a:bc
59 insmod netconsole netconsole=@/,@10.0.0.2/
63 insmod netconsole netconsole=@/,@fd00:1:2:3::1/
69 modprobe netconsole netconsole="@/,@10.0.0.2/;@/eth1,6892@10.0.0.3/"
71 Built-in netconsole starts immediately after the TCP stack is
101 Dynamic reconfigurability is a useful addition to netconsole that enables
106 netconsole module (or kernel, if netconsole is built-in).
113 cd /sys/kernel/config/netconsole/
123 rmdir /sys/kernel/config/netconsole/othertarget/
125 The interface exposes these parameters of a netconsole target to userspace:
155 have existed when netconsole was loaded / initialized).
158 `netconsole=` param are assigned the name `cmdline<index>`. For example, the
162 Let's suppose you have two netconsole targets defined at boot time::
164 …netconsole=4444@10.0.0.1/eth1,9353@10.0.0.2/12:34:56:78:9a:bc;4444@10.0.0.1/eth1,9353@10.0.0.3/12:…
179 Custom user data can be appended to the end of messages with netconsole
186 cd /sys/kernel/config/netconsole && mkdir cmdline0
205 cd /sys/kernel/config/netconsole/cmdline0/userdata
209 the entry will be omitted from netconsole messages::
211 cd /sys/kernel/config/netconsole && mkdir cmdline0
225 rmdir /sys/kernel/config/netconsole/cmdline0/userdata/qux
247 linux netconsole=+4444@10.0.0.1/eth1,9353@10.0.0.2/12:34:56:78:9a:bc
257 6.4.0,6,444,501151268,-;netconsole: network logging started
264 the message is split into multiple fragments by netconsole. These
288 from the config parameters passed to netconsole.
306 of other network traffic, netconsole is not intrusive. Netconsole