| /linux/drivers/iio/adc/ |
| A D | Kconfig | 3 # ADC drivers 82 and AD7091R-8 ADC. 121 converters (ADC): 468 ADC driver. 470 Broadcom iProc ADC driver. Broadcom iProc ADC controller has 8 816 ADC. 1378 ADC128S102 ADC. 1413 ADC chip. 1425 ADC chip. 1480 ADC chips [all …]
|
| /linux/Documentation/hwmon/ |
| A D | da9055.rst | 16 The DA9055 provides an Analogue to Digital Converter (ADC) with 10 bits 20 the input of the ADC during the conversion. 22 The ADC is used to measure the following inputs: 37 are stored in a 10 bit ADC. 41 Milli volt = ((ADC value * 1000) / 85) + 2500 43 The voltages on ADC channels 1, 2 and 3 are calculated as: 45 Milli volt = (ADC value * 1000) / 102 50 Temperatures are sampled by a 10 bit ADC. Junction temperatures 51 are monitored by the ADC channels.
|
| A D | da9052.rst | 17 The DA9052/53 provides an Analogue to Digital Converter (ADC) with 10 bits 21 the input of the ADC during the conversion. 23 The ADC is used to measure the following inputs: 46 Voltages are sampled by a 10 bit ADC. 50 Milli volt = ((ADC value * 1000) / 512) + 2500 54 Milli volt = (ADC value * 2500) / 512; 56 The voltages on ADC channels 4, 5 and 6 are calculated as: 58 Milli volt = (ADC value * 2500) / 1023 63 Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures 64 are monitored by the ADC channels.
|
| /linux/Documentation/ABI/testing/ |
| A D | sysfs-bus-iio-adc-mt6360 | 5 Indicated MT6360 USBID ADC which connected to connector ID pin. 12 Indicated MT6360 VBUS ADC with lower accuracy(+-75mA) 20 Indicated MT6360 VBUS ADC with higher accuracy(+-30mA) 28 Indicated MT6360 VSYS ADC 35 Indicated MT6360 VBAT ADC 42 Indicated MT6360 IBUS ADC 49 Indicated MT6360 IBAT ADC 56 Indicated MT6360 CHG_VDDP ADC 70 Indicated MT6360 VREF_TS ADC 77 Indicated MT6360 TS ADC
|
| /linux/Documentation/devicetree/bindings/sound/ |
| A D | ti,pcm6240.yaml | 8 title: Texas Instruments PCM6240 Family Audio ADC/DAC 14 The PCM6240 Family is a big family of Audio ADC/DAC for 39 digital converter (ADC) with 106-dB SNR. 44 digital converter (ADC) with 123-dB SNR. 53 software-controlled audio ADC. 55 ti,pcm3140: Automotive, Quad-Channel, 768-kHz, Burr-Brown™ Audio ADC 59 software-controlled audio ADC. 61 ti,pcm5140: Automotive, Quad-Channel, 768-kHz, Burr-Brown™ Audio ADC 65 software-controlled audio ADC. 76 ti,pcm9211: 216-kHz digital audio converter With Stereo ADC and [all …]
|
| A D | ti,tlv320dac3100.yaml | 22 * MIC1LP, devices with ADC 23 * MIC1RP, devices with ADC 24 * MIC1LM, devices with ADC 25 * AIN1, devices without ADC 26 * AIN2, devices without ADC 39 - ti,tlv320dac3100 # - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP) 40 - ti,tlv320dac3101 # - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)
|
| /linux/Documentation/devicetree/bindings/iio/adc/ |
| A D | ti,am3359-adc.yaml | 7 title: TI AM3359 ADC 27 description: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and 34 description: List of open delays for each channel of ADC in the order of 35 ti,adc-channels. The value corresponds to the number of ADC clock cycles 37 the start of ADC conversion. Maximum value is 0x3FFFF. 43 description: List of sample delays for each channel of ADC in the order of 44 ti,adc-channels. The value corresponds to the number of ADC clock cycles 51 description: Number of averages to be performed for each channel of ADC. If 54 ADC to generate a sample. Maximum value is 16.
|
| A D | adi,axi-adc.yaml | 7 title: Analog Devices AXI ADC IP core 13 Analog Devices Generic AXI ADC IP core for interfacing an ADC device 17 interface for the actual ADC, while this IP core will interface 18 to the data-lines of the ADC and handle the streaming of data into 44 A reference to a the actual ADC to which this FPGA ADC interfaces to.
|
| A D | st,stmpe-adc.yaml | 7 title: ADC on an STMPE multifunction device. 13 This ADC forms part of an ST microelectronics STMPE multifunction device . 14 The ADC is shared with the STMPE touchscreen. As a result some ADC related 25 Bitmask specifying which ADC channels should _not_ be 40 st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
|
| A D | st,stm32-adc.yaml | 7 title: STMicroelectronics STM32 ADC 10 STM32 ADC is a successive approximation analog-to-digital converter. 19 Each STM32 ADC block can have up to 3 ADC instances. 37 One or more interrupts for ADC block, depending on part used: 38 - stm32f4 and stm32h7 share a common ADC interrupt line. 40 ADC block. 41 - stm32mp13 has an interrupt line per ADC block. 211 - description: ADC interrupt line 238 ADC instance available on the machine. 250 Offset of ADC instance in ADC block. Valid values are: [all …]
|
| A D | qcom,spmi-vadc.yaml | 7 title: Qualcomm's SPMI PMIC ADC 14 SPMI PMIC voltage ADC (VADC) provides interface to clients to read 15 voltage. The VADC is a 15-bit sigma-delta ADC. 16 SPMI PMIC5/PMIC7 voltage ADC (ADC) provides interface to clients to read 17 voltage. The VADC is a 16-bit sigma-delta ADC. 61 Represents the external channels which are connected to the ADC. 72 ADC channel number. 79 ADC input of the platform as seen in the schematics. 87 This parameter is used to decrease ADC sampling rate. 97 down to 1/3 of its value before ADC measurement. [all …]
|
| A D | nuvoton,npcm750-adc.yaml | 7 title: Nuvoton NPCM BMC Analog to Digital Converter (ADC) 13 The NPCM7XX ADC is a 10-bit converter and NPCM8XX ADC is a 12-bit converter, 27 description: ADC interrupt, should be set for falling edge. 34 description: If not provided the defulat ADC sample rate will be used.
|
| A D | x-powers,axp209-adc.yaml | 7 title: X-Powers AXP ADC 13 ADC is frequently used as a provider to consumers of the ADC channels. 15 ADC channels and their indexes per variant:
|
| A D | fsl,imx25-gcq.yaml | 7 title: Freescale ADC GCQ device 11 analog inputs using the ADC unit of the i.MX25. 28 The regulator supplying the ADC reference voltage. 33 The regulator supplying the ADC reference voltage on pin XP. 38 The regulator supplying the ADC reference voltage on pin YP.
|
| A D | adi,ad7291.yaml | 7 title: AD7291 8-Channel, I2C, 12-Bit SAR ADC with Temperature Sensor 13 Analog Devices AD7291 8-Channel I2C 12-Bit SAR ADC with Temperature Sensor 26 The regulator supply for ADC reference voltage.
|
| A D | adi,ad4000.yaml | 77 Describes how the ADC SDI pin is wired. A value of "sdi" indicates that 78 the ADC SDI is connected to host SDO. "high" indicates that the ADC SDI 80 hard-wired low (GND). "cs" indicates that the ADC SDI pin is connected to 105 High-Z mode allows the amplifier and RC filter in front of the ADC to be 107 requirements of the switched capacitor SAR ADC inputs. 111 The hardware gain applied to the ADC input (in milli units). 112 The gain provided by the ADC input scaler is defined by the hardware
|
| A D | marvell,berlin2-adc.yaml | 7 title: Berlin 2 Analog to Digital Converter (ADC) 13 The Berlin ADC has 8 channels, with one connected to a temperature sensor. 14 It is part of the system controller register set. The ADC node should be a
|
| /linux/Documentation/devicetree/bindings/thermal/ |
| A D | generic-adc-thermal.yaml | 7 title: General Purpose Analog To Digital Converter (ADC) based thermal sensor 14 one of ADC channel and sensor resistance is read via voltage across the 35 Lookup table to map the relation between ADC value and temperature. 36 When ADC is read, the value is looked up on the table to get the 39 If not specified, driver assumes the ADC channel gives milliCelsius 45 - description: ADC read value
|
| A D | qcom-spmi-adc-tm-hc.yaml | 7 title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring 45 description: This parameter is used to decrease ADC sampling rate. 61 description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM 67 From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor 79 description: Time between AMUX getting configured and the ADC starting conversion. 89 signal is scaled down to 1/3 of its value before ADC measurement. If
|
| /linux/Documentation/devicetree/bindings/power/supply/ |
| A D | dlg,da9150-charger.yaml | 21 - description: ADC channel for current 22 - description: ADC channel for bus voltage 23 - description: ADC channel for junction temperature 24 - description: ADC channel for battery voltage
|
| A D | nokia,n900-battery.yaml | 22 - description: ADC channel for temperature reading 23 - description: ADC channel for battery size identification 24 - description: ADC channel to measure the battery voltage
|
| /linux/Documentation/devicetree/bindings/mfd/ |
| A D | gateworks-gsc.yaml | 17 - Hardware monitor with ADC's for temperature and voltage rails and 67 Properties for a single ADC which can report cooked values 73 description: Register of the ADC 77 description: Name of the ADC input 92 description: Values of resistors for divider on raw ADC input 100 A positive voltage offset to apply to a raw ADC 173 channel@2 { /* A1: Input Voltage (raw ADC) */
|
| /linux/drivers/staging/iio/adc/ |
| A D | Kconfig | 3 # ADC drivers 8 tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver" 13 temperature sensors and ADC.
|
| /linux/Documentation/devicetree/bindings/hwmon/ |
| A D | iio-hwmon.yaml | 7 title: ADC-attached Hardware Sensor 13 Bindings for hardware monitoring devices connected to ADC controllers 24 List of phandles to ADC channels to read the monitoring values
|
| /linux/Documentation/iio/ |
| A D | ep93xx_adc.rst | 2 Cirrus Logic EP93xx ADC driver 9 5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel 10 touchscreen/ADC module.
|