| /linux/drivers/isdn/hardware/mISDN/ |
| A D | Kconfig | 8 tristate "Support for HFC PCI cards" 12 Enable support for cards with Cologne Chip AG's 16 tristate "Support for HFC multiport cards (HFC-4S/8S/E1)" 20 Enable support for cards with Cologne Chip AG's HFC multiport 49 Enable support for AVMs FRITZ!CARD PCI cards 61 tristate "Support for cards with Infineon chipset" 66 Enable support for cards with ISAC + HSCX, IPAC or IPAC-SX 70 tristate "Support for cards with Winbond 6692" 74 Enable support for Winbond 6692 PCI chip based cards. 77 tristate "Support for NETJet cards" [all …]
|
| /linux/drivers/media/pci/bt8xx/ |
| A D | Kconfig | 26 tristate "DVB/ATSC Support for bt878 based TV cards" 37 Support for PCI cards based on the Bt8xx PCI bridge. Examples are 38 the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards, 39 the pcHDTV HD2000 cards, the DViCO FusionHDTV Lite cards, and 40 some AVerMedia cards. 42 Since these cards have no MPEG decoder onboard, they transmit
|
| /linux/drivers/media/pci/ttpci/ |
| A D | Kconfig | 3 tristate "SAA7146 DVB cards (aka Budget, Nova-PCI)" 8 Support for simple SAA7146 based DVB cards 9 (so called Budget- or Nova-PCI cards) without onboard 13 tristate "Budget cards" 29 Support for simple SAA7146 based DVB cards (so called Budget- 39 tristate "Budget cards with onboard CI connector" 53 Support for simple SAA7146 based DVB cards 54 (so called Budget- or Nova-PCI cards) without onboard 66 tristate "Budget cards with analog video inputs" 79 Support for simple SAA7146 based DVB cards [all …]
|
| /linux/drivers/net/can/softing/ |
| A D | Kconfig | 6 Support for CAN cards from Softing Gmbh & some cards 8 Softing Gmbh CAN cards come with 1 or 2 physical buses. 9 Those cards typically use Dual Port RAM to communicate 11 and PCMCIA cards. This driver operates on a platform device, 20 tristate "Softing Gmbh CAN pcmcia cards" 24 Support for PCMCIA cards from Softing Gmbh & some cards
|
| /linux/Documentation/admin-guide/media/ |
| A D | pci-cardlist.rst | 50 The current supported PCI/PCIe cards (not including staging drivers) are 60 bt878 DVB/ATSC Support for bt878 based TV cards 68 dm1105 SDMC DM1105 based PCI cards 70 dvb-ttpci AV7110 cards 71 earth-pt1 PT1 cards 72 earth-pt3 Earthsoft PT3 cards 75 hopper HOPPER based cards 79 mantis MANTIS based cards 84 pluto2 Pluto2 cards 87 smipcie SMI PCIe DVBSky cards [all …]
|
| A D | bt8xx.rst | 4 How to get the bt8xx cards working 18 This class of cards has a bt878a as the PCI interface, and require the bttv 41 cards, you should also do:: 74 - Old TV cards without EEPROMs, sharing a common PCI subsystem ID; 75 - Old TwinHan DST cards or clones with or without CA slot and not 111 Running multiple cards 132 When you have multiple cards, the order of the card ID should 134 that removing/inserting other PCI cards may change the detection 144 Probing the cards with broken PCI subsystem ID 148 reason. The cards do not have a correct PCI subsystem ID. [all …]
|
| A D | ci.rst | 61 At present the cards that fall in this category are the Twinhan and its 62 clones, these cards are available as VVMER, Tomato, Hercules, Orange and 68 The CI module support is largely dependent upon the firmware on the cards 69 Some cards do support almost all of the available CI modules. There is 71 working with these cards.
|
| /linux/drivers/pcmcia/ |
| A D | Kconfig | 9 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux 10 computer. These are credit-card size devices such as network cards, 12 actually two varieties of these cards: 16 bit PCMCIA and 32 bit 13 CardBus cards. 26 This option enables support for 16-bit PCMCIA cards. Most older 27 PC-cards are such 16-bit PCMCIA cards, so unless you know you're 28 only using 32-bit CardBus cards, say Y or M here. 30 To use 16-bit PCMCIA cards, you will need supporting software in 60 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards. 106 bool "Auto-tune EnE bridges for CB cards" if EXPERT [all …]
|
| /linux/Documentation/sound/ |
| A D | alsa-configuration.rst | 152 Module for AdLib FM cards. 219 This module supports multiple cards. 250 This module supports multiple cards. 275 This module supports multiple cards. 433 This module supports multiple cards. 452 This module supports multiple cards. 464 This module supports multiple cards. 474 This module supports multiple cards. 604 This module supports multiple cards. 2613 sound cards in that option. [all …]
|
| /linux/drivers/media/pci/mantis/ |
| A D | Kconfig | 7 Support for PCI cards based on the Mantis and Hopper PCi bridge. 12 tristate "MANTIS based cards" 25 Support for PCI cards based on the Mantis PCI bridge. 31 tristate "HOPPER based cards" 36 Support for PCI cards based on the Hopper PCI bridge.
|
| /linux/arch/m68k/ |
| A D | Kconfig.bus | 25 expansion cards in your Amiga that conform to the Amiga 27 expansion cards that do not fit in the Zorro slots but fit in e.g. 36 600. If you intend to use pcmcia cards say Y; otherwise say N. 54 operate ISA cards on Atari. Only 8 bit cards are supported, and 57 driver for RTL8019AS based NE2000 compatible network cards.
|
| /linux/drivers/staging/rtl8192e/ |
| A D | Kconfig | 13 This driver adds support for rtllib wireless cards. 30 use in wireless cards (including rtllib cards). 44 the IEEE 802.11i standard for use on wireless cards. 56 (WEP) crypto protocol for wireless cards.
|
| /linux/drivers/net/ethernet/dec/tulip/ |
| A D | Kconfig | 10 This selects the "Tulip" family of EISA/PCI network cards. 20 cards and also works with cards based on the DECchip 21 21040 (Tulip series) chips. Some LinkSys PCI cards are 24 cards, below. However, most people with a network card of this type 48 cards and also works with cards based on the DECchip 49 21140 (Tulip series) chips. Some LinkSys PCI cards are 52 cards, above. However, most people with a network card of this type 123 This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
|
| /linux/drivers/media/pci/cx88/ |
| A D | Kconfig | 12 TV cards. 23 Conexant 2388x based TV cards using ALSA. 38 This adds support for MPEG encoder cards based on the 46 tristate "DVB/ATSC Support for cx2388x based TV cards" 69 This adds support for DVB/ATSC cards based on the 80 This adds DVB-T support for cards based on the
|
| /linux/drivers/net/ethernet/8390/ |
| A D | Kconfig | 15 the questions about National Semiconductor 8390 cards. If you say Y, 25 (PC-card) Fast Ethernet card to your computer. These cards are 77 If you have an Acorn system with one of these network cards, you 81 tristate "Macintosh NS 8390 based ethernet cards" 86 Ethernet cards using an NS8390 chipset or its equivalent, say Y. 109 Many Ethernet cards without a specific driver are compatible with 123 This driver is for NE2000 compatible PCI cards. It will not work 124 with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 128 This driver also works for the following NE2000 clone cards: 163 Support for cards based on the National Semiconductor DP83902AV [all …]
|
| /linux/drivers/media/pci/saa7134/ |
| A D | Kconfig | 13 TV cards. 24 Philips SAA713x based TV cards using ALSA 39 tristate "DVB/ATSC Support for saa7134 based TV cards" 62 This adds support for DVB cards based on the 69 tristate "go7007 support for saa7134 based TV cards"
|
| /linux/drivers/media/pci/pt1/ |
| A D | Kconfig | 3 tristate "PT1 cards" 9 Support for Earthsoft PT1 PCI cards. 11 Since these cards have no MPEG decoder onboard, they transmit
|
| /linux/drivers/net/wireless/admtek/ |
| A D | Kconfig | 10 questions about these cards. If you say Y, you will be asked for 21 This driver is for ADM8211A, ADM8211B, and ADM8211C based cards. 22 These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as: 36 However, some of these cards have been replaced with other chips
|
| /linux/sound/drivers/ |
| A D | virmidi.c | 133 int i, cards, err; in alsa_card_virmidi_init() local 139 cards = 0; in alsa_card_virmidi_init() 154 cards++; in alsa_card_virmidi_init() 156 if (!cards) { in alsa_card_virmidi_init()
|
| /linux/drivers/media/pci/pluto2/ |
| A D | Kconfig | 3 tristate "Pluto2 cards" 8 Support for PCI cards based on the Pluto2 FPGA like the Satelco 11 Since these cards have no MPEG decoder onboard, they transmit
|
| /linux/drivers/media/pci/solo6x10/ |
| A D | Kconfig | 3 tristate "Bluecherry / Softlogic 6x10 capture cards (MPEG-4/H.264)" 14 compression capture cards and other Softlogic-based ones. 16 Following cards have been tested:
|
| /linux/Documentation/sound/cards/ |
| A D | bt87x.rst | 8 You might have noticed that the bt878 grabber cards have actually 21 playback). As most TV cards come with a short cable which can be plugged 25 Some cards do not bother to connect anything to the audio input pins of 26 the chip, and some other cards use the audio function to transport MPEG 34 The driver is now stable. However, it doesn't know about many TV cards, 35 and it refuses to load for cards it doesn't know.
|
| /linux/drivers/pci/ |
| A D | vgaarb.c | 1204 priv->cards[i].io_cnt++; in vga_arb_write() 1206 priv->cards[i].mem_cnt++; in vga_arb_write() 1242 uc = &priv->cards[i]; in vga_arb_write() 1297 priv->cards[i].io_cnt++; in vga_arb_write() 1299 priv->cards[i].mem_cnt++; in vga_arb_write() 1357 priv->cards[i].pdev = pdev; in vga_arb_write() 1358 priv->cards[i].io_cnt = 0; in vga_arb_write() 1359 priv->cards[i].mem_cnt = 0; in vga_arb_write() 1431 priv->cards[0].io_cnt = 0; in vga_arb_open() 1432 priv->cards[0].mem_cnt = 0; in vga_arb_open() [all …]
|
| /linux/drivers/net/can/peak_canfd/ |
| A D | Kconfig | 4 tristate "PEAK-System PCAN-PCIe FD cards" 7 CAN-FD cards family. 8 These 1x or 2x CAN-FD channels cards offer CAN 2.0 a/b as well as
|
| /linux/drivers/media/pci/dm1105/ |
| A D | Kconfig | 3 tristate "SDMC DM1105 based PCI cards" 15 Support for cards based on the SDMC DM1105 PCI chip like 18 Since these cards have no MPEG decoder onboard, they transmit
|