| /linux/Documentation/devicetree/bindings/gpio/ |
| A D | gpio-latch.yaml | 89 clk-gpios = <&gpio3 7 0>, <&gpio3 8 0>;
90 latched-gpios = <&gpio3 21 0>, <&gpio3 22 0>,
91 <&gpio3 23 0>, <&gpio3 24 0>,
92 <&gpio3 25 0>, <&gpio3 26 0>,
93 <&gpio3 27 0>, <&gpio3 28 0>;
|
| /linux/Documentation/devicetree/bindings/watchdog/ |
| A D | men-a021-wdt.txt | 19 gpios = <&gpio3 9 1 /* WD_EN */
20 &gpio3 10 1 /* WD_FAST */
21 &gpio3 11 1 /* WD_TRIG */
22 &gpio3 6 1 /* RST_CAUSE[0] */
23 &gpio3 7 1 /* RST_CAUSE[1] */
24 &gpio3 8 1>; /* RST_CAUSE[2] */
|
| /linux/arch/arm/boot/dts/ti/omap/ |
| A D | am572x-idk-common.dtsi | 62 gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
68 gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
75 gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
105 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
159 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
165 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
172 id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
173 vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>;
177 load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
182 gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
|
| /linux/arch/arm/boot/dts/nxp/ls/ |
| A D | ls1021a-moxa-uc-8410a.dts | 45 gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
51 gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
75 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
81 gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
87 gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
93 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
99 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
105 gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
111 gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
117 gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
[all …]
|
| /linux/arch/arm64/boot/dts/freescale/ |
| A D | imx8mm-verdin-yavia.dtsi | 20 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
27 gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
34 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
41 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
48 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
55 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
79 &gpio3 {
|
| A D | imx8mm-verdin-mallow.dtsi | 24 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
32 gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
40 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
48 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
56 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>;
64 interrupt-parent = <&gpio3>;
|
| A D | imx8mp-verdin-mallow.dtsi | 36 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
44 gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
52 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
60 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
77 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>;
85 interrupt-parent = <&gpio3>;
|
| A D | imx8mp-verdin-yavia.dtsi | 48 gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
55 gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
62 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>;
69 gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
76 gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
83 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
|
| /linux/arch/arm64/boot/dts/rockchip/ |
| A D | rk3566-anbernic-rg-arc.dtsi | 136 gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
142 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
148 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
154 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
160 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
166 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
172 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
178 gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
184 gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
190 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
| A D | rk3566-anbernic-rg503.dts | 204 gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
210 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
216 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
222 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
228 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
234 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
240 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
246 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
252 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
|
| A D | rk3326-odroid-go3.dts | 20 mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
21 <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
122 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
128 gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
133 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
138 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
146 reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
| A D | rk3568-nanopi-r5c.dts | 37 gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
44 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
50 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
56 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
64 reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
| A D | rk3566-anbernic-rg353x.dtsi | 131 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
137 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
143 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
149 gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
155 gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
161 gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
|
| A D | rk3568-wolfvision-pf5-display.dtsi | 31 cs-gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
32 miso-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
33 mosi-gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
37 sck-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
48 reset-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
|
| A D | rk3566-powkiddy-rk2023.dtsi | 107 gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
113 gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
119 gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
125 gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
131 gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
137 gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
143 gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
149 gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
155 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
161 gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
[all …]
|
| /linux/Documentation/devicetree/bindings/hsi/ |
| A D | nokia-modem.txt | 46 interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
48 gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
49 <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
50 <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
51 <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
|
| /linux/drivers/media/pci/cx88/ |
| A D | cx88-cards.c | 935 .gpio3 = 0x0000,
942 .gpio3 = 0x0000,
949 .gpio3 = 0x0000,
1721 .gpio3 = 0x0000,
1727 .gpio3 = 0x0000,
1733 .gpio3 = 0x0000,
2286 .gpio3 = 0x0000,
2293 .gpio3 = 0x0000,
2300 .gpio3 = 0x0000,
2307 .gpio3 = 0x0000,
[all …]
|
| /linux/Documentation/devicetree/bindings/sound/ |
| A D | maxim,max9759.yaml | 41 shutdown-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
42 mute-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
43 gain-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>,
44 <&gpio3 25 GPIO_ACTIVE_LOW>;
|
| A D | soc-ac97link.txt | 25 ac97-gpios = <&gpio3 20 0 &gpio3 22 0 &gpio3 28 0>;
|
| /linux/arch/arm/boot/dts/nxp/mxs/ |
| A D | imx28-duckbill-2-enocean.dts | 18 gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
23 gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
28 gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
40 gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
|
| /linux/drivers/pcmcia/ |
| A D | ti113x.h | 370 u8 gpio3, gpio3_old; in ti12xx_irqroute_func0() local
446 gpio3 &= ~TI1250_GPIO_MODE_MASK; in ti12xx_irqroute_func0()
447 if (gpio3 != gpio3_old) in ti12xx_irqroute_func0()
448 config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3); in ti12xx_irqroute_func0()
452 gpio3 = gpio3_old = 0; in ti12xx_irqroute_func0()
468 if (gpio3 != gpio3_old) in ti12xx_irqroute_func0()
748 u8 gpio3; in ti12xx_power_hook() local
799 gpio3 = config_readb(socket, TI1250_GPIO3_CONTROL); in ti12xx_power_hook()
801 gpio3 = (gpio3 & ~TI1250_GPIO_MODE_MASK) | 0x40; in ti12xx_power_hook()
803 gpio3 &= ~TI1250_GPIO_MODE_MASK; in ti12xx_power_hook()
[all …]
|
| /linux/Documentation/devicetree/bindings/arm/ |
| A D | ste-nomadik.txt | 31 gpios = <&gpio3 19 0x1>;
33 interrupt-parent = <&gpio3>;
36 gpios = <&gpio3 16 0x1>;
|
| /linux/arch/arm/boot/dts/nxp/imx/ |
| A D | imx6ull-phytec-tauri.dtsi | 44 gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
111 cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
112 <&gpio3 10 GPIO_ACTIVE_LOW>,
113 <&gpio3 11 GPIO_ACTIVE_LOW>;
199 sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
200 scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
208 sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
209 scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
257 rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
|
| /linux/arch/arm64/boot/dts/renesas/ |
| A D | r8a779f0-spider-ethernet.dtsi | 63 interrupt-parent = <&gpio3>;
81 interrupt-parent = <&gpio3>;
99 interrupt-parent = <&gpio3>;
|
| /linux/arch/arm/boot/dts/nxp/vf/ |
| A D | vf610-zii-cfu1.dts | 36 gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
42 gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
48 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
54 gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
72 tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
171 interrupt-parent = <&gpio3>;
|