1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2013 Sascha Hauer, Pengutronix
4 * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
5 */
6
7#include <dt-bindings/gpio/gpio.h>
8
9&fec {
10	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
11			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
12	fsl,err006687-workaround-present;
13};
14
15&i2c1 {
16	pinctrl-names = "default", "gpio";
17	pinctrl-0 = <&pinctrl_i2c1>;
18	pinctrl-1 = <&pinctrl_i2c1_recovery>;
19	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
20	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
21	clock-frequency = <100000>;
22	status = "okay";
23
24	pmic: pmic@8 {
25		compatible = "fsl,pfuze100";
26		reg = <0x08>;
27	};
28
29	sensor@48 {
30		compatible = "national,lm75";
31		reg = <0x48>;
32	};
33
34	eeprom@50 {
35		compatible = "st,24c64", "atmel,24c64";
36		reg = <0x50>;
37		pagesize = <32>;
38	};
39};
40
41&iomuxc {
42	/*
43	 * This pinmuxing is required for the ERR006687 workaround. Board
44	 * DTS files that enable the FEC controller with
45	 * fsl,err006687-workaround-present must include this group.
46	 */
47	pinctrl_enet_fix: enetfixgrp {
48		fsl,pins = <
49			/* ENET ping patch */
50			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
51		>;
52	};
53};
54