README
1How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i
2-----------------------------------------------------------
3
4- Build U-Boot for Hummingboard/Cubox-i:
5
6$ make mrproper
7$ make mx6cuboxi_defconfig
8$ make
9
10This will generate the SPL image called SPL and the u-boot.img.
11
12- Flash the SPL image into the SD card:
13
14sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
15
16- Flash the u-boot.img image into the SD card:
17
18sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
19
20- Insert the SD card in the board, power it up and U-Boot messages should
21come up.
22