1* Analog Devices ADIN PHY Device Tree binding
2
3Required properties:
4- reg: PHY address
5
6Optional properties:
7- adi,rx-internal-delay-ps: RGMII RX Clock Delay used only when PHY operates
8	in RGMII mode with internal delay (phy-mode is 'rgmii-id' or
9	'rgmii-rxid') in pico-seconds.
10- adi,tx-internal-delay-ps: RGMII TX Clock Delay used only when PHY operates
11	in RGMII mode with internal delay (phy-mode is 'rgmii-id' or
12	'rgmii-txid') in pico-seconds.
13- adi,phy-mode-override: Override phy-mode property for adin. This is useful
14	when a single device tree supports an adin PHY (e.g. ADIN1300)
15	or another PHY (e.g. AR8033) at the same address, but they require
16	different phy-modes.
17
18Example:
19
20	ethernet-phy@0 {
21		reg = <0>;
22
23		adi,rx-internal-delay-ps = <1800>;
24		adi,tx-internal-delay-ps = <2200>;
25		adi,phy-mode-override = "rgmii-id";
26	};
27