1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 4 * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc> 5 */ 6 7 #ifndef _CONFIG_CONTROLCENTERDC_H 8 #define _CONFIG_CONTROLCENTERDC_H 9 10 /* 11 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 12 * for DDR ECC byte filling in the SPL before loading the main 13 * U-Boot into it. 14 */ 15 16 /* Environment in SPI NOR flash */ 17 18 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 19 20 /* 21 * Environment Configuration 22 */ 23 24 #define CFG_EXTRA_ENV_SETTINGS \ 25 "netdev=eth1\0" \ 26 "consoledev=ttyS1\0" \ 27 "u-boot=u-boot.bin\0" \ 28 "bootfile_addr=1000000\0" \ 29 "keyprogram_addr=3000000\0" \ 30 "keyprogram_file=keyprogram.img\0" \ 31 "fdtfile=controlcenterdc.dtb\0" \ 32 "load=tftpboot ${loadaddr} ${u-boot}\0" \ 33 "mmcdev=0:2\0" \ 34 "update=sf probe 1:0;" \ 35 " sf erase 0 +${filesize};" \ 36 " sf write ${fileaddr} 0 ${filesize}\0" \ 37 "upd=run load update\0" \ 38 "fdt_high=0x10000000\0" \ 39 "initrd_high=0x10000000\0" \ 40 "loadkeyprogram=tpm flush_keys;" \ 41 " mmc rescan;" \ 42 " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\ 43 " source ${keyprogram_addr}:script@1\0" \ 44 "gpio1=gpio@22_25\0" \ 45 "gpio2=A29\0" \ 46 "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \ 47 "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \ 48 "bootfail=for i in ${blinkseq}; do" \ 49 " if test $i -eq 0; then" \ 50 " gpio clear ${gpio1}; gpio set ${gpio2};" \ 51 " elif test $i -eq 1; then" \ 52 " gpio clear ${gpio1}; gpio clear ${gpio2};" \ 53 " elif test $i -eq 2; then" \ 54 " gpio set ${gpio1}; gpio set ${gpio2};" \ 55 " else;" \ 56 " gpio clear ${gpio1}; gpio set ${gpio2};" \ 57 " fi; sleep 0.12; done\0" 58 59 /* 60 * mv-common.h should be defined after CMD configs since it used them 61 * to enable certain macros 62 */ 63 #include "mv-common.h" 64 65 #endif /* _CONFIG_CONTROLCENTERDC_H */ 66